|
|
|
|
|
|
|
BOARD "EVA"
Unsinkable large-sized board built in Eva by injection moulding. This board has been specially conceived for those spearfishermen who love to start from shore and who do not use a boat when fishing. Eva is, as a matter of fact, a true mini-boat, that can hold a great deal of cargo and is easily towed in any sea conditions.
The board is blue along the bottom part, in order to make it invisible to fish, and red on the top part along the waterline, in order to make it more visible above water. The careen has a shield under the bow, while the stern has two special catamaranstyle careens. The shield is designed to help the hull move smoothly over waves, while the catamaran careens help push the board upwards and also help prevent roll, while working as lateral stabilizers.
The board, even when fully loaded, is able to maintain its hydrodynamics, sliding over the water even in adverse sea conditions.
The bow is equipped with a special reel, with a capacity of about 35 meters of line with a diameter of 6mm, which carries out the function of line regulation and coiling.
Behind the reel there is spacious zipclosing red nylon sack. This makes the board even more visible, from far away, and allows for safe transport of accessories. In front of and behind the sack, there are two specific locations for the flagpole. The flag freely rotates and swivels along the flagpole depending on the wind direction, so it doesn’t get wrapped up along the flagpole.
Next to the sack/ bag, there are two thick nylon straps with safety clips that make it possible to safely carry two spear guns and two extra spears-shafts.
|
|
|
|
|
|
|
BOARD "OVERCRAFT"
The Overcraft board has the sliding and stability characteristics of typical large-sized, rigid boards, but with the advantage of being smaller and more compact, thanks to its modular design. The air tubes, in fact, can be removed, thanks to the quick insert slides along the central body.
The air tubes are available in 2 versions. One version features unsinkable rigid tubing, made in thermoplastic material by rotational moulding. The second version features inflatable PVC tubing with an outer protective cover made in highly-resistant PVC.
The central body, created through Nylon injection, is designed to store, block, and transport all your equipment and necessary accessories. On the bow, there is a reel with a capacity of 35 meters of 6mm diameter line.
A rigid cover box, built into the central body, is designed to hold your flashlight, weights, multiprongs, and other accessories. The rotating flag is always visible and has a system that prevents wrapping around the flag pole.
A series of multi-functional sideboards can be assembled on the numerous positions along the board.
Under the hull there are 2 pairs of clips which can be used to transport spears. Six large eyelets (3 on the bow and 3 on the stern) are designed to quickly hook up ropes or snap-hooks for fish hooks, traction buoys, etc.,
Overcraft is available in the version with only the inflatable tubing and in the version with both tube types.
WEIGHT WITH INFLATABLE TUBES: 2.2 Kg
WEIGHT WITH RIGID TUBES: 3.1 Kg
|
|
Simply streamlined. Designed to mount on an Oceanic BC, the Spinner BC Knife is a compact solution perfectly suited to the streamlined diver.
Solid 304 stainless steel blades feature razor-sharp smooth and serrated cutting surfaces
Line cutter and metal butt for signaling
Available in a sharp or blunt tip
Compact quick-release sheath features a one-hand release
Comes standard with BC mounting kit
|
|
COMMANDO
The handle and blade of this knife are made from a single piece of AISI 304L stainless steel.
The thickness of the blade is 3mm and gives the knife a high flex resistance.
On the upper part of the blade there is a special fret for unhooking spears and shafts. The handle in TPU is co-molded to give extra grip.
The ultra-thin sheath, with double hitch, makes it possible to remove the knife with one hand.
The double loophole, on the back of the sheath, makes it possible to position the knife on your belt, arm, or leg.
The hooks, positioned on the knife, also act as a hilt.
|
|
Maximo Cougar
New sheath with double lock for added security. Stainless steel blade.
|
|
|
The perfect knife to mount directly on your AERIS BC. It can be tucked away until needed thanks to its low profile design. Even though it is very compact it is still extremely functional. Serrated blade on one side with smooth blade on reverse.
|
|
This legendary product has been around for years and years and has now become a sought-after collector's item.
It is considerably heavy and large, perfect for a work tool, which this knife is designed to be.
The large blade is forged from special steel, with a smooth edge on one side and partly serrated on the other.
This side of the blade has a line cutter at the handle end.
The anatomical, non-slip handle is made from soft grip material for a comfortable grip and comes with anatomical moulding for the fingers to fit into.
On the back, it ends with a chrome-plated knob that can also be used as a mallet.
The front of the handle ends with a stainless steel hilt to protect the fingers.
The sheath is made from plastic and has a traditional elastic band to hold on the knife.
It also has loops to attach the knife to your leg or onto your belt and comes with two leg straps.
|
|
- 3"Blade
- Overall length 6.5"
- Patented secure locking system releases with natural "squeeze" of the handle
- Blade material options include 304 series stainless steel or high grade Beta Alloy Titanium
- Easily mounts to Buoyancy Compensator using hose mount kit or stainless steel "Barnacle nuts" included
- Blade styles include Blunt Tip in stainless steel, and Tanto or Stiletto in Titanium
|
|
|
A 175 mm knife with a 70X3.5 mm blade of high-performance martensitic stainless steel that lends the knife excellent resistance, to corrosion, wear, and a high hardness rating (>56° HRC). Hollow grind and with a high capacity for penetration and control on hard materials.
|
|
|
Mid size, lightweight and easy to handle knives range. Blades are made from a special stainless steel. The blades’ length is 108 mm. The sheath has no mechanical lock and is equipped with long-lasting rubber straps fitted with quick-release and adjust buckles
|
|
Knife "VENDETTA"
• Stainless steel AISI 430
• 118 mm sharp blade
• Coating : matt Téflon
• Ergonomic handle
• Rigid sheath with double
safety
• Size : 242 mm
• Weight : 151 gr
|
|
| ... products without information |
| |
|
|
Diver's safety
