|
|
The Wichard multi-position head adapter enables marine shackles to be positioned in line or turned 90°. Remove it, and the shackles swivel freely (35 to 70 series).
|
|
| Rutgerson's block are unique in its design and functionallity. The blocks for boats gives you an incredible strenght to weight ratio. Manufactured from the most technologically advanced composite materials and produced with a partnership of traditional skills and advanced engineering, we offer blocks ideally suited for performance cruising. |
|
Assembled with balls or rollers in Peek, K-Boat blocks guarantee very low friction.
KARVER K-BLOCKS EXCLUSIVE ADVANTAGES:
- SAFETY: lashing through the block center significantly increases safety in event the block fails. The line running through the block remains captive by the lashing, not allowing it to completely break free.
- LIGHT FOR BOATS WEIGHT: These exceptionally light blocks, combined with the lashing method of attachment, allow to reduce weight up to 50% as compared to conventional block with similar working load.
- ATTACHMENT: lashing through the center of the block offers unlimited applications and mounting possibilities (double lashing, becket...), the block can be tied up easily.
- REDUCED NOISE: lashing block greatly reduces noise created by mechanical attachments such as marine shackles and marine pins.
KARVER K-Blocks are available for safe working loads going from 0.2 to 4.5 T.
|
|
All with plain or ball bearing sheaves
A strong lightweight range of boat blocks suitable for use on dinghies for boats, dayboats or as lead blocks on larger craft.
BALL BEARING BLOCKS:
With our unique super low friction ball race system featuring Acetal sheaves with Derlin ball bearing running on a large diameter centre boss. This allows us to fit more load bearing balls which ensure extremely low frivtion performance even under high loads.
PLAIN BEARING BLOCKS:
Have a precision moulded acetal sheave running on a large diameter brass centre bearing ensuring freerunning under the highest of loads. |
|
| For general spinnaker use. Soft cheeks on sizes 1-3 snatch marine blocks feature soft synthetic rubber cheeks to handle rough treatment and the new Synchro snap shackle. Nylon dipped anodised aluminium cheeks on size 5. |
|
| Rutgerson's block are unique in its design and functionallity. The marine blocks gives you an incredible strenght to weight ratio. Manufactured from the most technologically advanced composite materials and produced with a partnership of traditional skills and advanced engineering, we offer blocks ideally suited for performance cruising. |
|
You will find many reasons to appreciate the new Barton Boomstrut. No more topping lift for boat hassles, no adjustments and no hang ups. Gain improved boat performance with less weight and windage aloft.
MAINTENANCE FREE, DURABLE DESIGN ELIMINATES FRICTION AND SLIDING PARTS
PATENTED FLEXING SPRING PROVIDES FAST RESPONSE AND A NEAR CONSTANT FORCE FOR VANG EFFICIENCY
EASY INSTALLATION INDEPENDENT OF EXISTING KICKING STRAP, NO NEED TO REPLACE EXISTING HARDWARE
SIMPLE TO FOLLOW FITTING INSTRUCTIONS AND ALL FASTENINGS INCLUDED
MAST FOR BOATS FITTING CAN USE THE LUFF GROOVE TO ELIMINATE DRILLING THE MAST
FIVE SIZES
LIGHTWEIGHT & MAINTENANCE FREE
The light weight, low profile design features two coated flexible fibreglass rods which provide the force to support the boom. Pulling the boom down causes the Boomstrut to flex upwards, releasing straightens the rods thereby lifting the boom.
Each Boomstrut is supplied with comprehensive and easy to follow fitting instructions. All fastenings required are included. |
|
Designed with the Volvo 70's and the Cup boat sailing teams, the low friction KBTi boat blocks are 60 to 70% lighter than any other existing block on the market.
The cheeks are in carbon fibers, the bearings for boats in ceramic or in high strengh alloy and the other parts are in titanium.
ADVANTAGES OF THE KBTi
- Very low friction under load
- Very light weight
- Minimum size
- Maximum safety
- Unique design
KBTi are available for working loads up to 12T. |
|
Titanium is not allowed in all classes, that is why KARVER offers its KBTi without titanium. The KBs are exactly the same as the KBTi, with stainless steel instead of titanium.
The cheeks are in carbon fibers, the marine bearings in ceramic or in high strengh alloy and the other parts are in "HR" stainless steel.
ADVANTAGES OF THE KBs
- Very low friction under load
- Very light weight
- Minimum size
- Maximum safety
- Unique design
KBs are available for working loads up to 12T. |
|
| Lewmar's new high performance Synchro Control Boat blocks are extremely lightweight with unprecedented load bearing capability. The sheave uses MRT (Metal Replacement Technology) which, combined wiht the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Cheeks use Long Fibre Technology giving exceptional strength and durability. The clever, open design facilitates easy flushing of sand and salt, for smooth running and simple maintenance. |
|
Old and classical Yachts
SOLIMAR started producing fittings for traditional yachts over twenty years ago. Marine blocks and accessories in ash wood and alumium bronze for traditional yachts and in tufnol, bronze and stainless steel for classical boats.
Among the many old and classic boats re-fitted with Solimar blocks and fittings : Creole, Puritan, Pacha, Tomahawk, Black Swan, Mariette, Te Vega, Invader,Yali, Magda XIII, Kipawa, Delfino etc... . Our latest fitting out has done for the boat El Bougaz (65 mt.).
. |
|
The Rutgerson deck organisers are availble in 5 different sizes with 2, 3, 4, 5 or 6 composite sheaves. The deck organisers can be stacked on top of each other to maximise availability space and each sheave is throughdeck bolted which gives a high break load. Special bolts are availble separately, see deckhardware - accessories.
The deck organisers are all 31mm high and have 40mm diameters sheaves. The breaking load of each sheave is 2000kg and the maximum working load is 750kg. The organisers are recommended for marine rope diameter of 8-14mm.
|
|
| Rutgerson's block are unique in its design and functionallity. The blocks for boats gives you an incredible strenght to weight ratio. Manufactured from the most technologically advanced composite materials and produced with a partnership of traditional skills and advanced engineering, we offer blocks ideally suited for performance cruising. |
|
The high load KARVER blocks for boats are assembled with self lubricating marine bearings ensuring a very high working load and breaking strengh in proportion to their size.
KARVER K-BLOCKS EXCLUSIVE ADVANTAGES:
- SAFETY: lashing through the block center significantly increases safety in event the block fails. The line running through the block remains captive by the lashing, not allowing it to completely break free.
- LIGHT WEIGHT: These exceptionally light blocks, combined with the lashing method of attachment, allow to reduce weight up to 50% as compared to conventional block with similar working load.
- ATTACHMENT: lashing through the center of the block offers unlimited applications and mounting possibilities (double lashing, becket...), the block can e tied up easily.
- REDUCED NOISE: lashing block greatly reduces noise created by mechanical attachments such as marine shackles and pins.
KARVER High Load K-Blocks are available for safe working loads going from 0.8 to 7 T. |
|
Wichard now offers a new edition of classic stainless steel marine blocks for dinghie. They are built to the highest standards of quality and performance. There are many applications for dinghies for boats as well as on larger sized boats for light for boat weight control lines.
|
|
Three sizes for lines up to 10mm dia
This robust range of stainless steel blocks for boats have a multitude of uses on all types of sailing boats.
Highly polished side plates with flared cheeks prevent the possibility of chafing the line whilst giving added strength.
A range of jamming blocks is also available and these give the ability to make up strong powerful compact and lightweight tackles.
These are ideal for use on dinghies for boats and dayboats for kicking straps or wherever a compact and powerful rope for boat tackle is required.
Now supplied with our new profile natural white sheaves and available in plain or ball bearing options. |
|
| Rutgerson's block are unique in its design and functionallity. The boat blocks gives you an incredible strenght to weight ratio. Manufactured from the most technologically advanced composite materials and produced with a partnership of traditional skills and advanced engineering, we offer blocks ideally suited for performance cruising. |
|
| On top for boats of the advantages offered by its ball-bearing marine blocks, Wichard also offers ratchet blocks with the same styling, featuring its new ratchet system. Several versions of this ratchet block are offered to cover for boat all applications. |
|
|
|
Blocks
