|
|
Blade Rudder 420
With wood center, covered with 220 gr.de roving, 150 gr. of mat and epoxi
|
|
ERGO PROFILED HANDLE
New ergonomic design reducing accidental foot catch release
SEALED THREADS
With the internal hatch lip seal the inner rim (and fixing holes) are sealed giving water tight securtity without the use of extra sealent.
|
|
BUOYANCY BAGS
Buoyancy bags belong to basic if not compulsory boat equipment. Their prevent the loss of a boat by sinking and its damage when navigating through the river basin with removed cockpit cover. Their production is paid a high attention.
|
|
Yak manufacture a wide range of canoe & kayak Buoyancy Bags made from abrasion resistant PVC coated nylon. They are available in a variety of sizes and shapes to suit most boats.
Dual inflation chambers offer built-in redundancy
|
|
|
Bungs All the choice you need for transom or buoyancy tank drains. Three types available, push-fit rubber bung version, a half turn bayonet and a screw thread + 'O' seal all with matching sockets. Both bayonet and screw bungs are fitted with a retainer to prevent loss. Spare bungs, are available separately.
|
|
Racing top covers
In polyester 600d pvc baked.
Easy to fit, with straps and clic-clac buckles
together for road use or with mast fitted
We manufacture top covers and undercovers for all the major classes. We also manufacture some covers for cats.
Do not hesitate to get in touch for further detail you may require!
|
|
Racing Laser undercover
Racing Optimist undercover
Racing 470 undercover
We manufacture all the covers for the main classes. We also produce "on demand" products, evne by one.
We use 2 kinds of clothes to manufacture these covers:
- Polyester ripstop 600D PVC backed
- Cotton polyester, dark blue.
Do not hesitate to get in touch for further details!
.
|
|
Cover upper deck with 420, made with roving long play 1680D polyester/PVC. 100%
Resistant to the water and one does not rot. With opening of high neck for the mast. Stainless
Inglefield steel hooks that allow the fast fastener. With 3 tether with adjustable fast clasps of clips for the tight one. Color: Gray clearly.
|
|
Plastic headboards meet all major dinghy class rules and are
made from rigid nylon.
- A045 Suitable for OK class dinghies.
- A045M Suitable for Folkboat.
- Manufactured from a rigid grade of nylon to give maximum leech support
- Use D037 liners and D331 rivets.
|
|
NEW RUDDERS DESIGNED TO IMPROVE PERFORMANCE OF HOBIE CAT 18 17 20 21
A little as a Funboard fin which is easy to change, we revised and innovated in the too often damaged and outmoded rudders.
On most of multihull boats, these rudders are very easy to replace: 2 screws to undo and here you are, equipped with new, light and successful profiles which will increase perf and make your boat easier to sail.
Strong light construction with inside carbon beam. Red end to have better visibility when upside down
|
|
|
|
|
|
|
African Cats offers Trampoline webbing for catamarans made from Dyneema® fiber.
Features of the webbing:
Completely UV resistant
Less than 2 % stretch
Far stronger then presently used materials
75% lighter (350 grams p/m2)
More than 80% open, so water can fall through the webbing very easily
Very comfortable you can even sleep on it. The maze sizes are available in 9, 12 and 17 mm square
LOW STRETCH
Because of the low stretch it is now possible to tie the webbing directly to the hulls and the forward crossbeam, so there will not be any openings between the yacht and the trampoline, making the forward platform a safer and more stable place to work or relax.
DEVELOPMENT
African Cats has developed this new webbing because the normally used trampolines do not let water penetrate the mazes well. Also, the weight of most webbing is over 2 kg/m2. The degradation and stretching of nylon webbing was another reason for African Cats to change to the Dyneema® webbing.
USED ON ALL HER CATS
From today all new African FastCats will be delivered with Dyneema® trampoline webbing.
PURCHASE
African Cats invites any interested catamaran builder to contact her if they want to use the same material so they can also produce safer and lighter cats.
|
|
All our trampolines are adaptable to the designed classes. They are designed and made in our own workshops. Original parts are not involved.
We can manufacture 1 piece or small series to your own specs. Send us a drawing, then we can make you a quote.
|
|
|
Heavy duty trampoline is a very strong woven polyester mesh that has a thick vinyl coating with UV and mildew inhibitors. Designed for industrial applications as well as trampolines on large catamarans.
|
|
PRODUCT INFORMATION
- Heavy duty 600D polyester canvas, PVC coated
|
|
|
The QRH Hook has been developed with safety in mind and in the light of documented fatalities. Suitable for any trapezing boat, this hook greatly reduces the risk of being trapped when capsizing and could easily become the "norm" on many harnesses
|
|
We manufacture many kinds of daggerbags: for blades, for centerboards, combo-bags etc.
We particularly have 2 very nice models, for Laser & for Optimist.
All are manufactured in a nice and strong ripstop 600D polyester PVC backed, padded with non-hydro foam.
We can study your own model.
|
|
Loos Professional Model Tension gauges perform cable tension readings accurately to within + or - 5% of the cable tension. They are the affordable answer to accurately measuring cable tension on sail boat standing rigging, guy wires, fences or any application where cable or wires are installed under load.
Manufactured of rigging anodized aluminum the Loos cable tension gauge is non corrosive and will give years of service. Detailed operating instructions are included with each tension gauge. Standing sailboat rigging can be adjusted while the tension gauge remains on the cable "just watch the pointer move"
|
|
RWO'S development over the years in the field of trapeze fittings, using the experience of sailors at club standard to Olympic status, has resulted in our capacity today to offer a very comprehensive range of safe comfortable and up to the minute equipment. We offer all the requirements to set up a complete trapeze system; from the simplest to the most sophisticated which demand more adjustment with the use of for example, continuous trapeze sets. All stainless steel items are polished.
Hoist Rings With a block and used in conjunction with a trapeze jammer give full height adjustment.
Trapeze Jam Blocks height adjusters using either 'V' Jam or Clamcleat .
Trapeze Handles Four models available to suit individual preference.
Trapeze Harness Hooks use heavy gauge stainless steel to give a robust trouble free unit.
Continuous Trapeze Hook This fitting should be attached to the trapeze wires and threaded with four mm nylon covered shock cord.
|
|
|
Hot galvanised chassis. Adjustable galvanised axle except on D 155. Suspension with rubber components. The cross members are telescopic, except on D 155 where the bunksare adjustable. Mast-holder. Removable taillight. Polyethylene mudguard. Leading rollers on the rear cross member (on D 175 - 305 - 355). NB: The empty weight may increase according to the equipment options (which reduces the payload).
|
|
Trailers Aluminium 2 in 1
Light - for the small catamarans
a concept innovating guaranteed 3 years
boat lanching authorised
tubular aluminium structure H.R.
anti-corrosive protection by anodization
Large wheels of series 145/70 R 13
Autograissés tight bearings...
|
|
|
CST Tiller Extensions combine the properties and appearance of carbon fibres, aramid fibres and heat cured epoxy to produce what we think is the best tiller extension yet for dinghies like the 49er, laser... the list goes on.
|
|
Lightweight hard anodised aluminium extensions, complete with pro-tiller
joint and foam grip. New graphite coloured anodising as standard in our
variety of lengths.
|
|
|
Designed for the hardest conditions, to reduce the strain and increase the sheer enjoyment of helming
|
|
The industry standards are set by Forespar's® complete line of hiking sticks with designs and lengths to satisfy every sailor. Our telescoping models offer a choice of three excellent fastening devices:
TFP (Quick Release); SF (Sta-Fast™); and SL (Speed-Lock) our new composite universal.
A long time favorite of serious sailors around the world, the TFP (Quick-Release) model can be instantly fastened to the tiller by simply depressing the plunger and inserting the detent pin into the special tubular fitting supplied. Again, an easy push on the plunger and the hiking stick is released from the tiller. Stow it or take it home with you. It's fast, simple and secure.
|
|
|
Maximum Comfort, Minimum Fatigue - Ladder style tiller extensions handle the higher helm loads of trailerable yachts and small keelboats, with three grip positions for maximum comfort and minimum fatigue. Universal joints are full stainless steel bolt-through style for strength and durability.
|
|
|
The QRH Hook has been developed with safety in mind and in the light of documented fatalities. Suitable for any trapezing boat, this hook greatly reduces the risk of being trapped when capsizing and could easily become the "norm" on many harnesses
|
|
|
Large size (1.80 m and bigger) 20305Multi-purpose basic model. Outside made of polyamide in a flashy color. Attachment with V-shaped straps for better stress force distribution.
|
|
|
|
Sailing dinghies and sport multihulls equipment
