|
|
Loos Professional Model Tension gauges perform cable tension readings accurately to within + or - 5% of the cable tension. They are the affordable answer to accurately measuring cable tension on sail boat standing rigging, guy wires, fences or any application where cable or wires are installed under load.
Manufactured of rigging anodized aluminum the Loos cable tension gauge is non corrosive and will give years of service. Detailed operating instructions are included with each tension gauge. Standing sailboat rigging can be adjusted while the tension gauge remains on the cable "just watch the pointer move"
|
|
QuikConnect - Toggle Fitting
Inboard end fitting. Machined Delrin end with toggle/jaw and fast pin. Compatible with stock spinnaker cars.
Available for 3.0, 3.5, 4.0, and 4.5 pole diameters.
|
|
|
The price favourable and durable Stainless Steel Rigging Screw line from Blue Wave has been a favourite among Riggers and yachtsmen for the last 50 years. It offers a wide variety of features. Laser engraved thread size, Blue Wave logo, and side marking of the left thread.
|
|
|
Navtec's latest entry in the turnbuckle market. Combines classic Norseman open-body design with the look of a swageless terminal to produce the most economical way to rig a boat with rod.
|
|
Suitable for use with most types of swaging machine.
Available for wire sizes 4mm - 5mm.
|
|
Unique toggle action allows
full articulation in two planes.
Designed to fit most chain plates and fixing points.
Thread sizes 1/4" - 3/4" UNF
|
|
Forged from high tensile Bronze alloy.Chromium plated to give a highly polished finish.
Available in thread sizes 1/4" - 3/4" UNF
|
|
- Designed to fit most chain plates and fixing points.
- Available in thread sizes 3/8" - 1 3/8" UNF
|
|
Suitable for use with most types of swaging machine.
Available for wire sizes 3mm -12mm
|
|
The Sta-lok terminal is a simple mechanical method of terminating wire ropes.
Manufactured from 316 Stainless steel,the Sta-lok terminal is stronger than the wire rope.
Available for wire sizes 3mm -12mm
|
|
|
The Blue Wave "T" Terminals all features, engraved wire size, Blue Wave logo, and swage depth marking for faster and easier swaging.
|
|
|
The traditional T Terminal , crafted from 316 stainless with a swage or swageless fitting.
|
|
|
Terminals are an effective and neat way of finishing wire with an eye or fork end. They are manufactured from Type 316 stainless steel to a high precision standard. The swage terminal requires compressing onto the wire with the use of a roll swaging machine whilst the swageless terminals can be fitted with the use of a spanner. Terminals are manufactured to suit metric wire only.
|
|
|
Used with soft Kevlar cable. Made from high-strength aluminum. Includes the socket, cone and 316 Stainless Steel reducer with shroud terminal.
|
|
Die-cast ZAMAK eye with chrome finish and plated steel shank. Cadmium plated nuts and washers are included. Inside eye diameter: 1". Maximum straight axis pull weight: 2,500 lbs. WARNING: Not for side loading or transom mounting. Do not use single shank bow eyes for lifting.
|
|
|
Blue Waves class 3 certified U-bolt is the most sold on the market because of the high quality and resistance against rust.
|
|
Features and Benefits
High strength 17-4 ph stainless steel loop. Flush mounting and minimum weight. Fasteners included. Backing plate supplied, which can be used as drilling template. Oval shape permits fitting in limited space.
|
|
'U' BOLTS:
From stainless steel bar and supplied with both top and backing washers.
|
|
These models, made in AISI 316 s. steel, are fixed to the deck with 4 screws that guarantee the best distribution of the load, so they are the right solutions for heavy loads.
They can be fit with a block and a “stand-up” spring.
|
|
|
Navtec toggles release fatigue stress and assist in allowing the load forces to align with the shroud angle.
|
|
|
|
Marine hardware : Rigging screws, Terminals, U-bolts
