|
|
The CL244 boom cleat allows you to adjust your outhaul whilst sailing to achieve the ideal sail shape and keep ahead of the competition. The tooth design of the cleat allows a quick, positive lock that is easy to release.
The alloy cleat is fitted onto the boom by a strap that allows you to personalise the position, a rubber packing piece accomodates tapered or oval tubes.
We offer 3 sizes of stap to fit most booms, CL111,CL115 and CL134.
The CL111 and CL115 suite booms 110-116mm in circumference.
whilst the CL134 covers booms from 132-136mm circumference.
|
|
CL268 - Racing Micros
CL268AN - Racing Micros (Hard Anodised)
Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines);
Dinghy control lines; Kitesurfing (5th line adjustment).
Manufactured from aluminium for a light weight and durable performance the CL268 is available in two finishes:
1. CL268 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL268AN has a hard anodised finish to give a hard wearing surface.
|
|
CL270 - Racing Micros with Becket
CL270AN - Racing Micros with Becket (Hard Anodised)
The becket holds the end of the rope under the cleat. No need for an extra fixing. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope.
Manufactured from aluminium for a light weight and durable performance the CL270 is available in two finishes:
1. CL270 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL270AN has a hard anodised finish to give a hard wearing surface.
|
|
Atlantic Marine system features non-corrosive materials specifically selected for their suitability in marine environment and subject to strict quality control at every stage of construction.
Aluminium chassis:
Chassis are made of aluminium marine alloy 6005 and designed as truss-frame. Longitudinal beams are custom-built extruded section (5 to 14 kg/m) while transversals and diagonals are Rectangular (R.H.S.) or Square Hollow Sections (S.H.S.). All members are assembled by MIG welding.
|
|
The Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely yet will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
|
|
Double cross-bollard
galvanised/stainless steel
|
|
CLEAT FOR PONTOON
The cleat is made of stainless steel, fixation to the pontoon by means of 4 stainless screws.
Dimensions:
length 200 mm %u2013 1500 kg working load
length 260 mm %u2013 3000 kg working load
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
A comprehensive range of AIRFLOAT MPS accessories is available including:
- Floating jetties
- Handrail stanchions for rope, wire, pipe or chain
- Diving or access ladders and steps
- Anchoring pillars
- Mooring cleats
- 2m and 1m PVC fenders
- UHMW wall side fenders
- Pile and 'H' beam guides
Other special requirements can be manufactured to a client's individual specification.
|
|
|
These traditional shape bollards are cast in tough manganese bronze with four hole fixing and have a strong and pleasing appearance.
|
|
For extra security bollards allow the rope to be wrapped around as well as using the cleat. Larger size CL210 available.
|
|
|
|
|
|
|
|
The combined advances in rope, materials and computer technology has called on all the resources of RWO engineers to meet the challenge and produce the most efficient cleat in the world. Unique teeth progression which has been scientifically tested to offer similar amounts of holding power on small or large rope diameters (Just try and use a smaller line for same application and hold it in your hand to get some idea of the grip required.) On older cam's just one or two teeth attempt to retain the rope which was OK for more forgiving old fashion softer rope, but now with the harder core Hi-tech rope higher loading under tension are resisting deformation. More teeth contact but at less depth means a kinder cleat to rope wear, easier entry and exit. The contoured cam shell is unlike other designs, it is not a compromise, the carbon fibre teeth form direct wedge to the pillar and transfer the load to the fastenings. The rest of the body is sculptured around this and whilst providing a distinct contrasting also forms part of a lubricated fluted bearing. Thus our engineers, together with computer and plastic experts have maximised the use of modern technics resulting in a world beating design.
|
|
With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
Clamcleat rope cleats now need little introduction. The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To release just jerk upwards.
There are now 3 basic models (i) original moulded nylon, (ii) racing aluminium silver coated, (iii) racing aluminium hard anodised.
The nylon models remain best value for where high loads or rope surge are not encountered.
|
|
OPEN CLEATS:
A wide range of open [Horn] cleats mouded from tough high strength black nylon.
|
|
CL261 - Power Grip 1
Double your pulling power AND take the pain out of pulling smaller ropes. CL261 Power Grip 1 allows you to pull twice as hard compared to using your bare hands. For right or left handed use. The smoothly contoured hand grip area has been voted the most comfortable shape to fit all hand sizes.
Manufactured from high pressure die-cast aluminium for strength and durability.
For two handed use try our CL262.
|
|
|
Tug Handles The plastic handle fits permanently with a knot whereas the Clamcleat can be kept in your pocket and positioned anywhere along the line being pulled. Both enable you to pull at least twice the load compared to wrapping small ropes around your hand.
|
|
Great new Flush Cleat design from the leader in stainless steel hardware! This cleat recesses flush to the deck for a clean, contemporary look at an affordable price. Corrosion-resistant 316 stainless steel construction (patented design). Water-resistant cleat recesses into cast body and is captured with lubricated seals. An optional drainage receptacle mounts below the cleat to drain off water.
Design Refinements
- Easy to operate- simply pull up the cleat from its body
- Standard four-hole mount
|
|
Cam cleat
Seldén cam cleats c-c 27 and 38 mm are made of carbon fibre reinforced polyetherimide. This material is selected for its high resistance to friction heat. There is also an aluminium version of cam cleat 38 made of hard anodised aluminium.
Full assortment of accessories such as fair leads, line guides, bull's eyes, risers and wedges.
|
|
Cam kits include:
Cam-Matic® cam cleat
Pawls open/close easily on ball bearings
Wire fairlead and base
Provide a fair lead; hold line at cleat
Wedges (kits 315, 316)
Angles cleats to 15°
Includes underdeck shim
|
|
|
Composite and aluminum versions with new teeth configuration for ease of cleating. The composite material is very robust offering greater wear resistance. For higher load applications, the aluminum version offers even greater strength and durability.
|
|
ALUMINIUM CAM CLEATS:
Available in two sizes for lines up to 14mm. A well proven design extremely strong and rugged, finished in hard anodised satin finish. Bases and fairlead options are stainless steel.
BUDGET CAM CLEAT:
Of the same design as our 'K' Cam, this low cost range features cams moulded from glass-reinforced nylon in light grey. An inexpensive cleat ideal for light applications.
Line dimensions and applications are as for 'K' Cams. All 'K' Cam accessories are compatible.
|
|
Camcleats.
Two ranges of cleats suitable for control lines on all sizes of boats up to half ton racing. Maximum use has been made of Hi-tech marine grade materials to cater for modern rope line technology, and a complete choice of accessories are available including top, rear and front mounted fairleads, under deck fixings, angled and parallel bases. Rope guides or fairleads are made of stainless steel or plastic. Rounded to give a smooth entry, they either fit under or over the cleat and are secured by the existing screws.
|
|
|
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fibre composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
|
|
The Easiest Cleat to Release
Compact roller action camcleat for easy release of high performance controls and mainsheets
Features and Benefits
- Development of successful PX model
- Three stage adjustable release spring
- Alloy cam and base surfaces as standard
- Ultra compact low profile design
- Stainless steel rope guides provide wide operating arc
- Integral 6 degree wedge
- T-Series for retrofit in hole centres of traditional cam cleats
- SW-Series swivel mounted PXR
- VP-Series mast mounted PXR
|
|
|
|
Marine hardware : Cleats, Jammers, Fairleads
