|
|
| Designed for permanent installation or hoisting up boat masts, the 2984 series All Round marine lamps are suitable for use as white navigation lamps, white anchor for boat lamps, red anti-collision lamps or auxlilary red and green lamps for yachts. BSH approved, saltwater proof and anti-magnetic they feature a Bayonet-lock on the lamp housing for easy bulb change. |
|
Features a krypton bulb that burns bright and lasts long. Constructed of rugged high-impact resin. Easy thumb switch for boats operation.
|
|
Sidelights are forward-facing colored marine lights, green on the starboard side and red on the port side. Navigation lighting for boats requirements vary depending on the size of your boat.
|
|
Compact and proven navigation lamp for yachts and powerboats.
Saltwater proof and non-magnetic, 3562 series marine lamps feature a 'snap-lock' housing allowing bulbs to be changed without tools. |
|
2 NM Tri-colour Boat lamp with Anchor for boat Lamp
BSH approved Tri-colour lamp with an integrated All Round White / Anchor lamp for attachment to yatch boat masts. Non-magnetic and saltwater resistant.
Lamp housing features a bayonet lock for easy bulb change. |
|
Deck Floodlight and Masthead Boat lamp combined in one robust housing.
Suitable for vessels up to 20m in length.
Features:
- Masthead lamp 2LT 002 984-30
- Hella 'Free Form' reflector technology
- Flexible mounting arms for mounting on a variety of mast for boats profiles
- Illuminates large areas of deck or superstructure
- Glass lens bonded with reflector to be dust and moisture resistant
- Covered bulbs for moisture protection
- All metal parts are stainless steel
- Black or White fibre reinforced housing |
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation boat lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation boat lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation boat lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable). |
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED's and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption - 70 to 90% less than traditional navigation lights for boats
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable). |
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation marine lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
Compact LED navigation marine lamp. Pre wired and completely waterproof.
- Long service life
- Impact and vibration proof
- Low power consumption |
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation marine lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) marine navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED's and boat electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin for boat.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption - 70 to 90% less than traditional navigation marine lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable). |
|
We offer one of the largest range of boat flags for Marine use with options to boat suit all budgets.
Our range includes both printed and hand sawn flags and sailboat covers the following areas:
- Flags of all nations
- International code of Signals
- Bunting & Table flags |
|
| Taylor Made Products offers a wide variety of Poles, Boat flags, and Accessories for most any situation. We carry both sewn and pre-screened flags. |
|
VERTICAL INSTALLATION
MOD. LT105NV Masthead: 225° Black case for boats
MOD. LP105NV Stern: 135°
MOD. LR105NV Red: 112,5°
MOD. LV105NV Green: 112,5°
MOD. LB105NV Bicolour: 112,5° / 112,5° |
|
Designed and manufactured in New Zealand, NaviLED®360 boat lamps draw a fraction of the energy required to run a conventional 2 nautical mile bulb lamp. Hella marine LED technology has no filaments to break thus making the lamps extremely shock, vibration and impact resistant. They are completely maintenance free. High impact acrylic housings provide superior durability in demanding conditions.
NaviLED®360 anchor for boats lamps have undergone extensive 'tested to destruction' programs to help lift for boat product reliability to a new standard. Each lamp is a completely sealed and waterproof unit, UV and corrosion resistant |
|
High intensity flash light for boat
- Application: In different colours for all generaL warning purposes e.g. as "Huge Vessel Light" or "Dangerous Cargo Light"
- Flash rates: 60, 120, 180 flashes per min.
- Protection class: IP 67
- Housing: Special plastic
- Housing colour: Mat black
- Electric: Cable for boats entry form side, PG 16
- Boat lamp (included): Xenon strobe tube
- Mounting: With 2 screws Ø 8 m |
|
| Light is like water. It's something most of us take for granted. Both are essential for life, present virtually everywhere and extremely complex. Reliable nautical lighting systems are absolutely essential for the world's shipping industry. This is where aqua signal has its roots and its core competency. As the world market leaders, we are prepared to accept any challenge when it comes to lighting technology for marine applications. |
|
Navigation marine lights aqua signal 55
- Application: Vessels > 20 - < 50 m in length. Lights marked with index ¥ may also be used on inland waterways without limitation of length
- Approvals: International according to IMO 1972, in Germany through BSH, other countries in particular see list of approvals
- Min. visibilities: 2 n.m., masthead light 5 n.m.
- Protection class: IP 56
- Housing: Polycarbonate, glass fibre reinforced, other components of non-corrosive materials. Nonmagnetic, seawater resistant
- Housing colour: Mat black
- Optics: Easy to change, seawater resistant special plastic Fresnel lens
- Electric: Conus inclusive 1.5 m special connection cable 2 x 1.5 mm², self-protective insulation, class II |
|
- Divide your consumption by 10 !
- Very high efficiency LED sailboat lamp
- Very long life: >50,000h (estimate)
- Nominal supply voltage: 12 to 24VDC
- No Polarity: can be connected without regard to polarity
- Power consumption: 1W typ.
- Current draw: <90mA @ 12VDC / <45mA @ 24VDC
- With electronic regulation
- Supply voltage range: 9 to 30VDC max.
- Negligible marine heating
- Operating temperature: -30 to +80°C
- View angle: 300° horizontal / 120° vertical
- Dimensions: Ø 0.79"
- Available in lengths: 1.42" / 1.5" / 1.62"
- Pictures and information may be changed or updated without notice |
|
- Divide your consumption by 20 !
- Very high efficiency LED boat lamp
- Very long life: >50,000h @ 25°C (estimate)
- Nominal supply voltage: 12 to 24VDC
- No Polarity: can be connected without regard to polarity
- Very low power consumption: 1.8W typ.
- Current draw: <150mA @ 12VDC / <80mA @ 24VDC
- With electronic regulation
- Supply voltage range: 9 to 30VDC max.
- Negligible marine heating
- Operating temperature: -30 to +80°C
- View angle: 360° horizontal / 120° vertical
- Dimensions: Ø 1" x 2.3"
- Available with BA-15S or BA-15D or BAY-15D bayonet base |
|
| BSH approved Classic Line navigation marine lamps offer durable and timeless stainless steel jackets for boats. The lamps are saltwater resistant and non-magnetic, with a centrally located connector for boat for easy bulb changes. Classic Line lamps are removable when the universal mount is used. |
|
| ... products without information |
| |
|
|
Navigation lights, Signalling
