Products > Safety, Clothing > Boats alarm

Boat alarms

71 Products (boat or nautical equipment) | 45 Companies

Man over board alarm transmitter Raymarine

Raymarine LifeTag is your personal wireless man overboard system. Utilizing the very latest in radio frequency broadcast technology, LifeTag monitors up to 16 tagged crew members ensuring they are safe and sound onboard. Each LifeTag pendant broadcasts a unique identification code back to the LifeTag base station, telling it that its wearer is "safe." In the event of man overboard, the link between ...

Man over board alarm transmitter MOB Raymarine

The LifeTag Base Station is the vigilant monitor of your Wireless Man Overboard System.

Connected to your SeaTalk navigation network ...

Boat exhaust temperature alarm XHIB Vetus

EXHAUST TEMPERATURE ALARM
Designed for water injected exhaust systems. Provides a visual and an audible alarm when the temperature ...

Boat gas detector GD1000 Vetus

GAS DETECTOR GD1000 WITH CARBON MONOXIDE DETECTION
The VETUS gas detector model GD1000 offers a gas detection system for a range of combustible gases including propane, butane, methane and hydrogen. In addition it will also detect poisonous carbon monoxide. A single sensor is supplied as standard, which can detect both flammable gases (such as bottled gas) and carbon monoxide. A second sensor ...

Man over board alarm system (transmitter and receiver) NKE

Light and simple, this transmitter is specially designed to guarantee the safety of your crew. It allows the automatic activation of the man-over-board detection system, whether you ...

Surveillance and alarm system fpr boats GMDSS Mastervolt

You want to stay in complete control of the ...

High water bilge alarm for boats SPX Flow Technology Örebro AB, Johnson Pump Marine

The Bilge Alert™ system uses a patented Mirus™ field effect detector cell, which produces a micro-electrical field that ...

Boat carbon monoxyde detector CMD-1MR-9V Fireboy - Xintex

The newest model in the Fireboy-Xintex Carbon Monoxide Detector family, the CMD-1MR-9V is a 9V battery powered carbon monoxide detector. Ideal for boats requiring additional CO alarm ...

Boat fire alarm SS-770 Fireboy - Xintex

The SS-770 Smoke and Fire Alarm is a general purpose smoke and fire alarm suitable for marine and recreational vehicle use.

The unit is 9V ...

Boat fuel vapour detector M SERIES Fireboy - Xintex

Equipment for dealing with Gasoline Fuel Fumes

Xintex® manufactures and sells vapor-detection instruments to provide positive vapor detection before trouble can develop!

Fume Detectors :: Accessories

...

Multifunction alarm for boat Jastram Engineering

This unit is the control and monitoring center of the MSA system.
• MSA system is designed to meet all major Classification Societies’ requirements
• Each MSA box services one hydraulic power unit
• Start / Stop capabilities at local and remote stations
• The MSA box connects to multiple remote alarm panels
• ...

Boat alarm ALM100 Maretron

Maretron's Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder, along with a red high-brightness LED to indicate an alarm condition. A second green LED incidates ...

Boat gas detector CO Metalcraft

SEA-FIRE's CO detector will aleart the boater to potentially dangerous ...

Man over board alarm system (transmitter and receiver) CREWSAFE Mobilarm

Mobilarm Crewsafe is a wireless sensor network for marine employees which continuously monitors the location of personnel and generates an immediate alert ...

Man over board alarm transmitter V100 Mobilarm

Water-activated man overboard locator beacon with GPS for localised alert to parent vessel ...

Man over board alarm system (transmitter and receiver) MOB DOLPHIN Alltek Marine Electronics Corp.

AMEC MOB DOLPHIN-600 System uses 2.4GHZ RF technology to communicate between one MOB DOLPHIN-601 Controller and maximized 99 DOLPHIN-602 Pendants within 30 meters at the same time. Each MOB DOLPHIN-601 can connect MOB DOLPHIN-603 ...

Man over board alarm system (transmitter and receiver) Marine Rescue Technologies

General Purpose Man Overboard Systems...
Sea Marshall® SARfinder® GPS plot self-managed man overboard locating system

If a crewmember fell overboard... they could be unconscious, it could be night time...how would ...

Boat alarm SA20 Cruzpro

The SA-20 Security System provides cost effective security for boats. Activated by an easy-to-operated digital access keypad, the SA-20 connects ...

Boat exhaust temperature alarm ETM20 Cruzpro

The ETM-20 Engine/Exhaust Temperature Monitor and Alarm uses modern electronics and a reliable solid state temperature sensor to accurately monitor the temperature at any point it is attached. The alarm is factory pre-set ...

Boat gas detector GD10LPG Cruzpro

The GD10 Gas Vapor Monitor detects gas vapors at 25% of the concentration required for an explosion ...

3 products

GPS - GSM remote surveillance and alarm MGR100(G)(W)BASIC ASTEL d.o.o.

The MGR100 is a high-efficient GSM remote controller specially designed to use in nautical applications. Built-in GSM module with different interfaces enable simple and ...

GPS - GSM remote surveillance and alarm MGR100(G)(W) REFERENCE ASTEL d.o.o.

Built-In GSM Module with SIM Interface
Built-In GPS Module for Location Management and Alarming (G)
SMS Control
DTMF (PSTN, ...

GPS - GSM remote surveillance and alarm MGR100(G)(W) ADVANCE ASTEL d.o.o.

Built-In GSM Module with SIM Interface

Built-In GPS Module for Location Management and Alarming (G)

SMS ...

Boat bilge operation and control panel (with alarm) 600-VM3 BEP Marine

The 600-VM3 offers the ability to have 3 voltage inputs with Hi/Low alarms. It can also be configured as a bilge monitor with selectable ...

Boat gas detector 600-GD BEP Marine

The Contour Matrix Gas Detectors are the product of continuing research and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct ...

GPS - GSM remote surveillance and alarm MANTA BlueRay Marine PTY

Manta Features :
-Manta Premium System with GPS Tracking
-5 alarm zones, multiple sensor capability
-3 warning zones for bilge and shore power ...

GPS - GSM remote surveillance and alarm (for trailer boat) STING T BlueRay Marine PTY

Specifically for trailer boat protection, it has all the features of the Sting, plus GPS Tracking and internal switch for tilt detection.

Once ...

Boat GSM remote surveillance and alarm INSIGHT GPS GOST by Paradox Marine

ARADOX MARINE EVO Wired Yacht Security and Monitoring System Package with GSM Cellular Phone Voice Reporting.
This EVO Package includes all the components ...

Multifunction alarm for boat INFERNO INTENSO MARINE GOST by Paradox Marine

Inferno Intenso Marine can function as a Sound Barrier or as a traditional siren. Inferno Intenso Marine effectively ...

1 2 >Next

Related categories

Boat lights/flares, Recognition signals
Boat navigation lights, Signalling
Boat navigation LED lights
Yacht alarms

Related searches

Boat alarm
Boat detector
Boat gas detector
GPS tracker for boat
Alarm
Man over board alarm
Temperature alarm
Fire alarm
Remote surveillance
Detector
Monitoring system
Operation panel
Control panel
Gas detector
Transmitter
Receiver
GPS tracker
Panel

Catalog search

Navman
TRACKFISH 6600

Here the first 5 pages from the catalogue "TRACKFISH 6600", returning results for: boat alarm

P. 57
: Arrival radius boat is closer to the destination or to a waypoint than the alarm trigger value Anchor alarm boat moves by more than the alarm trigger value XTE boat moves off course by more than the alarm trigger value Danger boat comes closer to a danger waypoint than the alarm trigger value

P. 17
). If the TRACKFISH is connected to an autopilot, the TRACKFISH will send data to the autopilot to steer the boat to the destination. Start the autopilot. If the XTE alarm is enabled, an alarm will sound if the boat deviates too much from its intended course (to set the XTE alarm, see section 15-8). 3

P. 80
. The displays show how far the boat has deviated from the plotted course and if the boat is approaching a CDI line. If the XTE alarm is enabled (see section 15-8) an alarm will sound if the boat reaches a CDI line. COG Course Over Ground: Direction in which the boat is moving over the ground. CTS Course

P. 71
, alarms or calibration are changed in one instrument, then the values will automatically change in all other instruments of the same type. Each instrument can be assigned to a group of instruments (see section 15-10). If the backlight is changed in an instrument in group 1, 2, 3 or 4 then

P. 24
. Danger: A danger waypoint is a point to avoid. If the boat comes within the danger radius of a danger waypoint the unit can sound an alarm (see section 15-8). A display option: Controls how the waypoint is displayed when the Waypoints setup option is set to Selected (see section 15-2): Off
Navman
8120/8084 COMBO MANUAL

Here the first 5 pages from the catalogue "8120/8084 COMBO MANUAL", returning results for: boat alarm

P. 86
the trigger value. For example, the Danger alarm will sound if the boat comes closer to a danger waypoint than the trigger value and the Anchor alarm will sound if the boat moves by more than the trigger value. You can display the alarm status in the data header (see section 2-7-3). The alarm status

P. 51
NAVMAN 8120/8084 Installation and Operation Manual 51 To set a low fuel alarm for a tank: 1 Press MENU twice, select Fuel, then select Setup tanks. 2 On a multi-tank boat, select the tank to set the alarm for. 3 Select Tank alarm and enter a fuel level to trigger the low fuel alarm; or enter

P. 93
sensors and instruments External alarms: Lights or sounders in the boat to sound alarms through the boat (see section 20-4). GPS or DGPS antenna: For GPS navigation, see section 20-5. Sonar transducer: For depth sounding and fish finding, see section 20-6. Fuel sensors: For fuel functions

P. 21
. If the Instrument has no autopilot, steer the boat manually: a use the boat position and destination on the chart or highway windows b or use navigation data displayed on the data header (see section 2-7-3) c or use COG and BRG on the compass (see section 2-7-4). Note: 1 If the XTE alarm is enabled

P. 112
should deviate from the plotted course. The chart and highway windows show the CDI lines, which are like a highway over the water where the boat will move. The windows show how far the boat has deviated from the plotted course and if the boat is approaching a CDI line. If the XTE alarm is enabled (see
Navman
TRACKER 5607/5507 MANUAL

Here the first 5 pages from the catalogue "TRACKER 5607/5507 MANUAL", returning results for: boat alarm

P. 49
or more times until the Setup menu is displayed, then select Alarms: All alarms except Loss of GPS fix can be turned on (enabled) or off (disabled). Symbol Alarm Alarm sounds when it is on and the: Arrival boat is closer to the destination or to a waypoint radius than the alarm trigger value Anchor alarm

P. 33
TRACKER 5505/5505i/5605 Installation and Operation Manual NAVMAN 33 To set a low fuel alarm for a tank: 1 Press one or more times to display the Setup menu, select Fuel then select Setup tanks. 2 On a multi-tank boat, select the tank to set the alarm for. 3 Select Fuel alarm and enter a fuel

P. 16
has no autopilot, steer the boat manually: a use the boat position and destination on the chart or highway displays b or use navigation data displayed on the data header (see section 2-8-2) c or use COG and BRG on the compass (see section 2-8-3). Note: 1 If the XTE alarm is enabled, an alarm will sound

P. 66
. The displays show how far the boat has deviated from the plotted course and if the boat is approaching a CDI line. If the XTE alarm is enabled (see section 14-7) an alarm will sound if the boat reaches a CDI line. COG Course Over Ground: Direction in which the boat is moving over the ground. CTS Course

P. 6
card Chart data Chart features (built in world chart) 3-2 Chart details 3-2-4 & 5 C-MAP? chart Tides at a port 11 C-MAP? chart Alarms Built in alarms 2-6 SmartCraft engine alarms 1-1 SmartCraft Boat data Data at top of main displays 2-8-2 Compass at top of main displays 2-8-3 Dedicated data
Nobeltec
VNS 10

Here the first 5 pages from the catalogue "VNS 10", returning results for: boat alarm

P. 197
appear onscreen. This alarm will clear once the Tender re-enters the Guard Zone or can be turned off manually. Range for a Tender Guard Zone is between .0001 and 1000 units. NOTE: All units of measure are adjustable from Tools | Options | Units. To create a Tender Guard Zone: 1. Open the Boat

P. 67
on the button. Figure 10.5 - Boat Properties - Alarm Tab Changes to the Waypoint Arrival distance after routes or marks have been created do not affect those objects. To change Waypoint Arrival distance for existing waypoints, change their Arrival Circle Radius (see Waypoint Arrival in Chapter 9 - Advanced

P. 68
. Input a distance from the boat that you do not wish the Tender to exceed. This is a 360¢ª radius around the vessel. 4. Select how you wish the alarm to function if the Tender crosses the Guard Zone (No Sound, Sound Once or Sound Continuous). 5. Click OK to close the Tender Alarm Settings window

P. 96
you how close you are to the cross track error limits in the Boat Properties Alarms Tab. Screen Intensity Display Modes When on the water at night, any light coming from inside your pilot house or helm station can reduce visibility. In order to increase visibility in moderate to dark lighting conditions (and

P. 59
the arrival alarm distance for the current waypoint, select Arrival Circle Radius from the waypoint right mouse menu. Setting a Waypoint Arrival Alarm 1. Click Edit | Boat Properties from the main menu. 2. Go to the Alarm Tab. 3. Place a check-mark in the check box next to Waypoint Arrival. 4. Click
Nobeltec
ADMIRAL 10

Here the first 5 pages from the catalogue "ADMIRAL 10", returning results for: boat alarm

P. 197
appear onscreen. This alarm will clear once the Tender re-enters the Guard Zone or can be turned off manually. Range for a Tender Guard Zone is between .0001 and 1000 units. NOTE: All units of measure are adjustable from Tools | Options | Units. To create a Tender Guard Zone: 1. Open the Boat

P. 67
on the button. Figure 10.5 - Boat Properties - Alarm Tab Changes to the Waypoint Arrival distance after routes or marks have been created do not affect those objects. To change Waypoint Arrival distance for existing waypoints, change their Arrival Circle Radius (see Waypoint Arrival in Chapter 9 - Advanced

P. 68
. Input a distance from the boat that you do not wish the Tender to exceed. This is a 360¢ª radius around the vessel. 4. Select how you wish the alarm to function if the Tender crosses the Guard Zone (No Sound, Sound Once or Sound Continuous). 5. Click OK to close the Tender Alarm Settings window

P. 96
you how close you are to the cross track error limits in the Boat Properties Alarms Tab. Screen Intensity Display Modes When on the water at night, any light coming from inside your pilot house or helm station can reduce visibility. In order to increase visibility in moderate to dark lighting conditions (and

P. 59
the arrival alarm distance for the current waypoint, select Arrival Circle Radius from the waypoint right mouse menu. Setting a Waypoint Arrival Alarm 1. Click Edit | Boat Properties from the main menu. 2. Go to the Alarm Tab. 3. Place a check-mark in the check box next to Waypoint Arrival. 4. Click