|
|
CARBON FLAGPOLE
lenght 1000 mm, diameter 25 mm
Available until 2000 mm lenght and 35 mm diameter
On request we can customize the flagpole with your boat name.
|
|
As well as our extensive range of LED lamps, Hella also manufacture compact and proven Blub navigation lamps for yachts and powerboats.
Included in the range of Bulb navigation lamps are Port, Starboard and Bi-colour position lamps, vertical surface lamps and all round lamps.
All Hella lamps are UV and impact resistant, Saltwater proof and non-magnetic. 3562 series lamps feature a 'snap-lock' housing allowing bulbs to be changed without tools.
|
|
Features a krypton bulb that burns bright and lasts long. Constructed of rugged high-impact resin. Easy thumb switch operation.
|
|
Sidelights are forward-facing colored lights, green on the starboard side and red on the port side. Navigation lighting requirements vary depending on the size of your boat.
|
|
Deck Floodlight and Masthead Lamp combined in one robust housing.
Suitable for vessels up to 20m in length.
Features:
- Masthead lamp 2LT 002 984-30
- Hella 'Free Form' reflector technology
- Flexible mounting arms for mounting on a variety of mast profiles
- Illuminates large areas of deck or superstructure
- Glass lens bonded with reflector to be dust and moisture resistant
- Covered bulbs for moisture protection
- All metal parts are stainless steel
- Black or White fibre reinforced housing
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED's and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption - 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED's and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption - 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
We offer one of the largest range of flags for Marine use with options to suit all budgets.
Our range includes both printed and hand sawn flags and covers the following areas:
- Flags of all nations
- International code of Signals
- Bunting & Table flags
|
|
BSH approved LED navigation lights.
Designed and manufactured in New Zealand, NaviLED PRO lamps are a quantum leap forward in energy efficiency and durability.
Combining the latest LED and Multivolt 9-33V DC technology, the NaviLED PRO range have ultra low power consumption, just 10% of that required to run a bulb navigation lamp, just 3.2 watts.
Fully sealed in UV and high impact resistant acrylic, and pre-wired with 2.5m of marine cable, these lamps are IP67 certified making them extremely reliable.
Available in either Black or White shrouds.
|
|
Compact LED navigation lamps. Pre wired and completely waterproof.
- 2 Nautical Mile Visibility
- Long service life
- Impact and vibration proof
- Low power consumption
- Multivolt 8-28V DC
- Approved by: IMO COLREG, USCG, RINA (I), ABYC A-16, NMSC
Available in either Black or White Shrouds, with clear or coloured lens.
|
|
Series 32 LED - navigation lights, application vessels < 50 m / 163’, visibility 2 nm / 3 nm, housing and optics non-corrosive, seawater resistant, consumption extremely low
Voltage:
12 V, 24 V
Housing:
Polycarbonate in black or white, shock resistant, non - corrosive, non – magnetic, seawater resistant. The LED-body is thermally connected to a machined aluminium casing which keeps it cool allowing a liftetime of more than 50.000 hours. Optional stainless steel covers available for port-, starbord-, stern- and bicolor lights
Optics:
Patented optics are UV- and saltwater resistant requiring only a single LED per light source
Electric:
Low power consumption (1,5 W per sector). Current from 12 – 24 V. Invers polarity protection
Authorisation:
CE, BSH, USCG, RINA, IMO
|
|
aqua signal 25 STANDARD – robust navigation light of special plastic in black or white
Voltage:
12 V, 24 V
Housing:
Polycarbonate, shock resistant, non-corrosive, non-magnetic, seawater resistant
Protection:
IP 45
Optics:
(Fresnel) plastic
Electric:
2/3 pol.
Range of visibility:
1 nm, 2 nm. (starboard, port, bicolor)
Application vessels:
< 12 m / 39’ (Scandinavia < 7 m / 23’)
Authorisation:
CE, USCG, IMO
|
|
Modern design and optimized size for sport boats and yachts up to 50 m length. 2 LEDs for more color-brightness and double safety. Power consumption. Vibration resistant. Easy installation with waterproofed plug-in connection.
Voltage:
12 – 24 V DC, +/- 20%
Housing:
Polycarbonat in black or white. UV- and saltwater resistant
|
|
Designed and manufactured in New Zealand, NaviLED®360 lamps draw a fraction of the energy required to run a conventional 2 nautical mile bulb lamp. Hella marine LED technology has no filaments to break thus making the lamps extremely shock, vibration and impact resistant. They are completely maintenance free. High impact acrylic housings provide superior durability in demanding conditions.
NaviLED®360 anchor lamps have undergone extensive 'tested to destruction' programs to help lift product reliability to a new standard. Each lamp is a completely sealed and waterproof unit, UV and corrosion resistant
|
|
VERTICAL INSTALLATION
MOD. LT105NV Masthead: 225° Black case
MOD. LP105NV Stern: 135°
MOD. LR105NV Red: 112,5°
MOD. LV105NV Green: 112,5°
MOD. LB105NV Bicolour: 112,5° / 112,5°
|
|
aqua signal 40 - traditional and robust navigation light of stainless steel and special plastic. Application vessels < 20 m / 65’
Voltage:
12 V / 24 V
Housing:
Polycarbonate black or white. shock resistant, non-corrosive (stainless steel), non – magnetic, seawater resistant
Optics:
(Fresnel) plastic, seawater resistant
Protection:
IP56/IP55
Electric:
2 pol.
Cable entry:
PG 9
Visibility:
2 nm, 2 nm (flash 3 nm), 3 nm, Topp 3 nm, anchor 2 nm
Authorisation:
CE, BSH, USCG, IMO
|
|
- T-Top mountable navigation light. No more worrying about not having the navigation light at the highest point on the boat.
- Drill a few holes, wire it in, and hook it into the navigation lights.
- 3-mile 360° visibility.
- Installs with two #10 fasteners (included).
- Each light includes 9-watt wedge base lamp.
- All wiring is concealed and protected within the pivoting base.
- GUARANTEED AWESOME! - Love it or Return it.
|
|
- Divide your consumption by 20 !
- Very high efficiency LED lamp
- Very long life: >50,000h @ 25°C (estimate)
- Nominal supply voltage: 12 to 24VDC
- No Polarity: can be connected without regard to polarity
- Very low power consumption: 1.8W typ.
- Current draw: <150mA @ 12VDC / <80mA @ 24VDC
- With electronic regulation
- Supply voltage range: 9 to 30VDC max.
- Negligible heating
- Operating temperature: -30 to +80°C
- View angle: 360° horizontal / 120° vertical
- Dimensions: Ø 1" x 2.3"
- Available with BA-15S or BA-15D or BAY-15D bayonet base
|
|
- Divide your consumption by 10 !
- Very high efficiency LED lamp
- Very long life: >50,000h (estimate)
- Nominal supply voltage: 12 to 24VDC
- No Polarity: can be connected without regard to polarity
- Power consumption: 1W typ.
- Current draw: <90mA @ 12VDC / <45mA @ 24VDC
- With electronic regulation
- Supply voltage range: 9 to 30VDC max.
- Negligible heating
- Operating temperature: -30 to +80°C
- View angle: 300° horizontal / 120° vertical
- Dimensions: Ø 0.79"
- Available in lengths: 1.42" / 1.5" / 1.62"
- Pictures and information may be changed or updated without notice
|
|
| ... products without information |
| |
|
|
Navigation lights, Signalling
