Furling gear

49 companies | 272 products

Whether youre cruising or racing,
Karver KF Furlers will make sail...

FURL YOUR SPINNAKER!
Unlike traditionnal code sail furling,
spinnaker...

FURL YOUR SPINNAKER!
Unlike traditionnal code sail furling,
spinnaker...

Installed for 10 years on ocean racing yachts. KFx structural furlers are the perfect balance of performance and safety. Installed with a structural anti- torsion stay, it replaces...

Whether youre cruising or racing,
Karver KF Furlers will make sail...

{{productDetail[26548]}}

C260: Manual reefing system with self -contained halyard - Cruising - Max forestay dia: 5 mm - Boat length: 5 à 7 m
General description

This Profurl system was designed for boats between 5m and 7m (16 ft to 23 ft)....

C290: manual reefing system - Cruising - Max forestay dia: 6,35 mm - Boat length: 7 to 9 m
General description

Reliability, toughness and long-life: Profurl's Cruising range of reefing-furling systems are designed for coastal cruising, blue water cruising, or even sailing around the world. Cruising reefing-furling systems are designed to last and integrate the best of Profurl's proven...

C320: manual reefing system - Cruising - Max forestay dia: 7 mm - Boat length: 9,50 to 12 m
General description

Reliability, toughness and long-life: Profurl's Cruising range of reefing-furling systems are designed for coastal cruising, blue water cruising, or even sailing around the world. Cruising reefing-furling systems are designed to last and integrate the best of Profurl's proven...

C350: manual reefing system - Cruising - Max forestay dia: 8 mm - Boat length: 11,50 to 13,5 m
General description

Reliability, toughness and long-life: Profurl's Cruising range of reefing-furling systems are designed for coastal cruising, blue water cruising, or even sailing around the...

C420: Manual reefing system - Cruising - Max forestay dia: 10 mm - Boat length: 13 à 15 m
General description

Reliability, toughness and long-life: Profurl's Cruising range of reefing-furling systems are designed for coastal cruising, blue water cruising, or even sailing around the...

{{productDetail[21562]}}

Simple
You hoist the sail just once a season, so a small crew can manage a much larger boat. Easy A Seldén furling mast makes it easy...

Selden offers a complete hydraulic cruise control programme based on three major components:
■ Furlex Hydraulic...

Seldén has recently launched a dinghy-sized jib furler for its Furlex range of headsail reefing systems. The new top swivel and bottom furler feature the same quality, innovation and performance that has made Furlex the worlds best-selling range of furling systems. The Furlex 20S bottom furler has twin bearing units with 4 mm stainless steel ball...

The new Furlex 30 is a high load increased capacity version of the Furlex 20. It is suitable for larger...

The Furlex 50S is the perfect choice for every sailor who wants a compact, low weight furling and reefing system. It shares many...

{{productDetail[21696]}}

High Load Top Furler

Roller...

Furling unit

Roller furling...

High Load Drum Furler

Roller...

{{productDetail[29493]}}

AXXON Composites is launching the OST Carbon Furling Mast : the first furling mast manufactured in a single Autoclave curing (One Shot)

The separating partition which will receive the sail is laminated...

{{productDetail[33939]}}

Several important components make up a complete set of oil-control...

Several important components make up a complete set of oil-control...

{{productDetail[32661]}}

For over 30 years Nemo has been producing masts for sailing boats up to 30 metres long; this long experience in the sector has enabled us to optimise quality and, at the same time, the aesthetic element which characterises the product. Type 6061 Nedal alloy is used, the accessories are welded with a Tig controlled camber system,...

The new patented spanker furling gear outside the mast.

Perfectly furls and unfurls the spanker in just a few seconds
...

Features:

The new patented spanker furling gear outside the mast.

. Perfectly furls and unfurls the spanker in just...

Safety on board is extremely important and when there is a valid help navigation is certainly more relaxed. The reliable “WONDERFURL” is a jib-furler designed by...

A deck fastening and a halyard are all one need to fit SPEEDY on your boat. lt is the first fast furling system...

{{productDetail[23572]}}

Hook HS is a patented device which allows to lock the halyard to the mast automatically. With this device you avoid the halyard stretching under load and reduce the mast compression. This is a great advantage...

{{productDetail[33998]}}

three type of reels:

- hydraulic boom reel

- electric boom reel ( 220V or 380V)

- manual boom reel

The frame of reels is created in stainless steel, anti-dragging,treated with epoxy...

Nautical Container is customized on request, and it can be equipped by:

oil containment booms...

{{productDetail[37011]}}

Depending on the type of luff reinforcement of an existing top genoa or for new builds, Bartels offers jib furlers with continuously looping...

The jib furling system with tackle is characte-rized by its simple design. The cable halyard is running around a block in the swivel and tightened above...

the jib furling systems with halyard swivel for cable forestays are suitable for complete furling of hank-on sails. A Reefing is not possible because the cable forestay is not suitable...

This type of reefing system with waterproof deck passage is used on classic yachts to preserve the look with modern technology. In competition sailing too, the installation of a jib furling system below deck makes it possible to bend-on the sail's tack close to the deck. Thanks to the bilateral angular mobility...

In these below deck reefing systems, the headstay cable does not rotate, the tensile forces on the headstay are not loaded on the bearings. Therefore, the highest loads will easily be handled and the tensile forces are led...

{{productDetail[22264]}}

Compact dimensions, lightweight and reliability are the key features for any marine high performance product. Besides those qualities, obtained by a careful design and engineering, the use of the best materials...

The Captive Furler is the innovative jib furler with integrated hydraulic stay tension-ram that has got the DAME 2002 prize in the category Deck Equipment, Sails and Rigging.

As...

Cariboni’s code zero furlers the lightweight solution to have an automatic furler to control code zeros by on board hydraulic. Our code zeros have a black hard coated aluminium...

{{productDetail[22728]}}

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and...

Small Boat underdeck furling units are ideal for sportboats and daysailers from 4.8 m to 9 m (16 to 30 ft). The drum...

Originally built for Volvo 60s, Code Zero furlers are used...

The ESP Furler is designed for the cruiser looking for an easy-to-assemble furler with an elegant design. Install a Harken® ESP Furler and trim safely from the cockpit when it blows; unfurl instead...

{{productDetail[21575]}}
{{productDetail[21637]}}

Headstay halyard locks have a heat-treated stainless steel...

{{productDetail[21726]}}

Two years in the making and Southern Spars Generation 2 Furling Boom is now out on the water.

New Zealand built 51m performance sloop Kokomo 3 was the first superyacht to benefit from Southern’s innovative Generation 2 Furling Boom, integrating...

FURLERS & HEADSTAY FOILS
Rig...

{{productDetail[20333]}}

It is the forerunner of all vertical furling systems available on the market. It started the fashion of vertical...

In-mast Electric Mainsail Furler

Mainsail furling mechanism, to be fitted inside...

Bamar has been manufacturing mainsail furling motorizations and outhauls for over 20 years.

These motorizations make use of a worm gear reduction...

boom furling motorization

Line of electric motorizations for in-boom furling systems. Available for sailing yachts with indicative boom length from 5 to 22 m.

The innovative device is made up by a reduction gear, an electric...

Manual foresail furler available in different sizes, C0, C0T, C1, C2, C3, e C5 (for either 1x19 wire stays from Ø 4 to Ø 14mm, or Rod from -10 to -30). The kit is supplied complete with aluminium...

{{productDetail[22245]}}

Like the Facnor carbon furling systems on board of Jean Luc Van Den Heedes 80 footer, the Ls/Lx/Rx drum and swivel are fitted with a bearing box (see above). This was tested over ocean races under loads up to 20 to...

FlatDeck is a powerful furling system fitted with a webbing. This great Facnor innovation offers safe and easy headsail furling: no reefing line overriding and an important torque. Overall, with the FD low profile drum, you benefit from a maximum luff !

NO...

Facnor, the world leader in continuous line Gennaker furlers, introduces a unique and modern design for headsail furling systems. This range of new products was developed from our experience with designing continuous line furlers for ocean racing teams. Now sailors can enjoy the benefits of our innovative continuous line system on any boat.



Our...

Facnor now offers a range of electric headsail furlers. These electric furlers make sail handling safe and easy which translates to better overall cruising conditions aboard your boat...

the drum :

The SD drums are fitted over the original forestay without cutting the wire. Our drums are mainly made of extruded aluminum parts, machined and black hard anodized as well as the 2 plates containing the furling line. There are two large stainless bearings, packed in grease, fitting...

{{productDetail[21382]}}


The smart choice - Worldwide recognized leader for in-boom systems for boats 33' to 85'.

There are over 3000 systems in use making passages all over the world's oceans in all sea conditions. With over 15 years...

Heavy weather in-boom furling & reefing for sailboats 26' - 35' Maximum luff (P)=40' Maximum foot (E)=14'


This powerful boom system...

{{productDetail[21814]}}

The CN5 Furler is designed for headsails such as gennakers, screechers, code zeros or even staysails. Just roll them up and drop them down.

The CN5 Furler is designed for headsails such as gennakers, screechers, code zeros or even staysails. Just roll them up and drop them down.

Our Furlers feature:

...

The CN3 Furler is designed for headsails such as gennakers, screechers, code zeros or even staysails. Just roll them up and drop them down.

alt The CN3 Furler is designed for headsails such as gennakers, screechers,...

The CF1.5 furler features:

Serviceable Torlon Bearings in sealed environment for long life.
Interior shaft and Clevis pin are grade 5...

The CN3S Furler is designed for Asymmetric Spinnaker Sails up to 800 sq feet but can also be used with Luff line sails like Code Zeros.

Large diameter (6.5 in) sheave for handling sails in demanding conditions.
The CN3S features heavy...

Now with a new Delrin outer guide and titanium clevis pin for durability!

The CN5S Furler is designed for Asymmetric Spinnaker Sails up to 2,000 sq ft. but can also be used with luff line sails like Code Zeros by leaving the tack ring unused.

Large diameter (7.5 in) sheave for...

{{productDetail[32670]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With NauticExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation