Products > Production machine and tool > Boatyards : Cloth roll rack, Roving impregnator

Boatyard : Cloth roll racks, Roving impregnators

16 Products (boat or nautical equipment) | 7 Companies

Feeding rack for cutting table (for boatyards and shipyards) CRA-355 Eastman

The Power Feed System simplifies material feeding by automatically adjusting ...

Feeding rack for cutting table (for boatyards and shipyards) CRA-310 Eastman

The Eastman Roll Stand System allows the user to ...

Feeding rack for cutting table (for boatyards and shipyards) HEAVY DUTY ROLL STAND Eastman

The Heavy Duty Roll Stand is engineered to introduce rolled material goods for spreading onto a fully automated, ...

4 products

Fabric impregnator (for boatyards and shipyards) Magnum Venus Plastech

The MVP Four-Roll Fiber Wet-Out Unit revolutionized the marine industry years ago. It continues to find application in the manufacture of boats of all sizes as well as numerous other non-marine products. Best ...

Feeding rack for cutting table (for boatyards and shipyards) RACK 'N' ROLL Vidir Machine Inc.

Compact machine allows one person to unroll, inspect, measure, cut, re-roll ...

Motorized storage carousel for cloth rolls (for boatyards and shipyards) FABRIC CAROUSEL Vidir Machine Inc.

Vidir Machine's Fabric Carousels provide storage solutions for many different applications ...

Motorized storage carousel for reels (for boatyards and shipyards) WIRE/SPOOLED PRODUCTS Vidir Machine Inc.

The motorized wire storage machine is the most space efficient method to store and merchandise reels of wire. The machine is operated ...

Feeding rack for cutting table (for boatyards and shipyards) SPF100 Gerber Technology

The GERBERfeeder™ single-ply fabric feeding device is used in conjunction with conveyorized, automated cutting. It features Gerber's electronically controlled cradle ...

Fabric impregnator (for boatyards and shipyards) Pro-Set Inc.

Three models of PRO-SET impregnators are designed with the custom builder or small production shop in mind. All three models are hand crank operated. They can be completely disassembled and are easy to clean. Resin is applied to the fabric as it passes through a resin bath, and adjustable nip rollers control the resin content in the laminate. Resin contents from 35% to 55% by weight are possible. ...

Fabric impregnator (for boatyards and shipyards) 60" WITH MOTOR DRIVE Phoenix Equipment Company

The Phoenix Resin Impregnator offers Quality control ...

Fabric impregnator (for boatyards and shipyards) Manual Phoenix Equipment Company

The Phoenix Resin Impregnator offers Quality control ...

Fabric impregnator (for boatyards and shipyards) Boatspeed

To move away from generic prepregs, the Boatspeed team developed CustomPreg®, an in-house computer controlled ...

Related categories

Boatyard : Cloth cutting tools, machines
Boatyard : Cutting tables, Spreading machines

Related searches

Roving impregnator
Storage rack for cloth rolls
Impregnator
Free roll unwinding cradle
Storage rack
Rack for cutting table
Mobile storage rack
Storage carousel

Catalog search

Veneziani Yachting
THE EPOXY SYSTEM RESINA 2000

Here the first 5 pages from the catalogue "THE EPOXY SYSTEM RESINA 2000", returning results for: roving impregnator

P. 10
8 REINFORCING FABRICS Wet the surface to be treated with RESINA 2000 by means of a short-hair roller or a brush. Cut a piece of fabric slightly larger than the area to be treated and spread it uniformly. Impregnate the fabric with an additional coat of RESINA 2000, removing possible air

P. 14
at the joints. 33 Impregnate the fabric with an additional coat of Resina 2000. For removing air bubbles and wrinkles often special foambreaking rollers are used. The adhesion may be defective on sharp edges, which should be rounded previously. Remove excess resin with a spatula or a small roller

P. 20
Prepare the surface by discsanding. 22 Apply by brush a quantity of catalysed RESINA 2000 sufficient to impregnate the damaged area. 33 Fit a piece of fiberglass mat, previously cut to the desired shape. Impregnate the fiberglass with more catalysed RESINA 2000. 44 Repeat the above procedure

P. 19
17 3 FITTING ACCESSORIES Mixtures of RESINA 2000 with its additives are well suited for fitting deck accessories, by gluing them directly to the deck or by gluing of the fastening screws. In the latter case, just impregnate the screw holes with resin prior to inserting the screws. Upon

P. 18
during curing. Using MICROSFERE for the profiling of large areas provides also a sound-proofing and heat-insulating barrier. For filling proceed as follows: ? Sand and clean the surface to be treated, removing, if necessary, rough spots. ? Impregnate the surface with RESINA 2000, using rollers
Italvipla
flex

Here the first page from the catalogue "flex", which returns results for: roving impregnator

P. 1
with ecologic textile soap for fixing colors. USE SUGGESTIONS: Wash in domestic washing maschine only. Gradation not over 30° / 40°. Absolutely forbidden use chemical products duringthe wash. IMPORTANT: It is recommended not to leave the fabric impregnated with salt water for a long time, proceed
Liros
LIROS_Catalogue_2010_EN_1_4

Here the first 5 pages from the catalogue "LIROS_Catalogue_2010_EN_1_4", returning results for: roving impregnator

P. 45
on request (Ref. 10445) • individual lengths and colour-impregnation possible Colour 10145 Colour 10445 228 White 418 White impregnated Polyamide high tenacity Construction 16-plaited Industrial Rope Material LIROS Venetian Blind Cord 20140/20145 22140/22145 Ø mm Length of spool m Polyester, cord

P. 46
Rope 6 228 White Polypropylene Rope Industrial Rope Colour 10945 418 White impregnated LIROS Polypropylene Rope 00112 Low-priced, floating all-purpose line, available in many different diameters. UV-resistant Polypropylene Split-fibre. Ø mm Breaking Length of strength kg spool m Material 200 8

P. 15
resistance and zero water absorption due to LIROS impregnation system. Ø mm Breaking Length of strength kg spool m • very easy to splice 230 100 2 410 100 580 100 950 100 1250 100 5 • zero water absorption 1,5 4 • very low stretch 100 3 • higher breaking strength than wire

P. 29
and enhances the abrasion resistance. • Stretch characteristics <1% • easy to splice • compact construction ensures shape retention under extreme loads Material 100% Vectran® 12-plaited with LIROS Impregnation 188 Black ¡¡¡¡¡i 0 Breaking Length of mm strength

P. 6
LIROS D-Pro 01505 The LIROS 100% pure Dyneema® rope with the latest technology in coa- ting technology. The pre stretched 12-braid is extremely easy to splice. Impregnated with a special PU, the resistance to abrasion has improved more than 75%. The pre stretching process further improves
Lineo
LINEO – FLAX PREPREG

Here the first 2 pages from the catalogue "LINEO – FLAX PREPREG", returning results for: roving impregnator

P. 1
Powerful by Nature Ref: TDS- FLAXPLY© – 27 February 2010 - V01 LINEO – FLAX PREPREG PrePreg made of Flax Fibers / Epoxy Resin General information Description LINEO FLAX PREPREG is a range of pre-impregnated material based on an Epoxy Resin system and pre-treated Flax Fibers using

P. 3
to be accurate but we advice to perform your own characterization. TRACTION Tensile strength MPa 330 Modulus GPa 35 Elongation %1.8 Tensile strength MPa 300 Modulus GPa 22 Elongation % 2.4 (ISO 529) FLEXION (ISO 14 125) COMPOSITE MATERIAL DENSITY: 1,3 FLAXPLY© Shelf Life • • • Under 4
West System
WEST SYSTEM User Manual and Product Catalogue

Here the first 5 pages from the catalogue "WEST SYSTEM User Manual and Product Catalogue", returning results for: roving impregnator

P. 24
refers to the cloth being applied to an epoxycoated surface before the coating reaches final cure the dry method is to apply the cloth over dry surface then impregnate the glass epoxy b the wet method is preferred whenever possible b b wet method b working small quantities epoxy it is possible to work

P. 27
two three coats to completely fill the weave the cloth to allow final sanding that will not damage the cloth b figure 28 b coat the surface to fill the weave before the wetout becomes tack free b dry method b b 1 b prepare the surface bonding see surface preparation page 10 2 position the cloth

P. 25
b 1 b prepare the surface bonding as discussed surface preparation page 10 b 2 b prefit trim the cloth to size roll the cloth neatly so that it may be conveniently rolled back into position later b 3 b roll heavy coat epoxy the surface b 4 b unroll the glass cloth into position over the wet epoxy

P. 53
b 727 biaxial glass tape b available 125mm width weight 450g m2 45 this tape significantly increases structural strength where major reinforcement is required 727a 450g m2 biaxial glass tape 125mm wide 5m length 727b 450g m2 biaxial glass tape 125mm wide 90m roll b 773775 peel ply b peel ply

P. 26
b figure 25 b trim excess cloth after the epoxy gels but before it cures hard place metal straightedge top midway between the two overlapped edges b cut through both layers cloth sharp utility knife figure 26 being very careful not to cut too deeply b figure 26 b trim overlapped cloth