Products > Material and paint > Soundproofing and thermal insulation material

Soundproofing and thermal insulation materials

67 Products (boat or nautical equipment) | 22 Companies

Soundproofing paint SR 500 Silent Running / Temp-Coat

# General Properties: SR 500 is water-based, non-toxic and VOC-compliant. There are no harsh smells and, before curing, cleans up with water.
# Adhesion: SR 500 is designed as a "permanent" coating. The product has excellent adhesion to all metal, fiberglass, wood and most plastic surfaces. ...

Soundproofing paint SR 600 Silent Running / Temp-Coat

SR 600 is a high performance coating specifically designed to improve thermal insulating and moisture wicking properties of surfaces as well as eliminating unwanted sound and vibration. SR 600 works by reducing moisture build-up by increasing the surface area to allow the moisture to evaporate faster and by converting noise energy and vibrations into a low-grade heat, which is then dissipated throughout ...

Soundproofing panel PHONOFLEX® Donati Group Spa

Thanks to Donati Group's experience, combined with know-how and broad studies in acoustics, Phonoflex® has been developed, an innovative sound absorbing panel based on Helmholtz's resonance.

The sound wave passes through the drilled skin going into the ...

Fire protection panel PROMARINE 640/450 Drumarkon

Promarine 640, Promarine 450

Promarine 640 and Promarine 450 are used as fire restricting wall-, ceiling- and floor panels ...

Soundproofing panel Halyard

Maritex An immensely tough fibreglass cloth with a sealed metallised ...

Sound-proofing foam Insultech

Our acoustical insulation composites are designed to control, dampen, direct and/or eliminate noise. These composite include ...

Core material : foam (thermal insulation) CRIOFOAM® SOTECOFOAM

CrioFoam® is a structural foam characterized by a low thermal conductivity, due to the special formulation and type of of expanding agents, which permits energy savings of up to 20%. The foams are composed of polymeric ...

Sandwich panel : wood / foam D5 Daniel Georgus

These panels are available with different kinds of outer veneers like teak, Sapeli- or Khaya-Mahogany etc.

Application: ...

Sandwich panel : wood / foam (thermal insulation) D7 Daniel Georgus

Application: Suitable for engine room covers and all areas that require noise protection. Weighs a little less than D8.

Construction: There are two different ...

Sandwich panel : wood / foam (thermal insulation) D8 Daniel Georgus

Application: Suitable for engine room covers and all areas that require noise protection.

Construction:There are two different versions available
Version ...

Boat sound proof blister for engines and electricity generator sets Kilo-Pak

Kilo-Pak offers sound attenuating enclosures. These innovative sound shields represent a significant departure from designs currently on the market. Design criteria included not only sound attenuation but also ease of maintenance and installation.

Both sound shields incorporate a strong, corrosion resistant stainless steel base not unlike Kilo-Pak%u2019s ...

Sandwich panel : plywood / rubber (soundproofing) World Panel

The basic insulation between two rooms is the difference in the levels of acoustic pressure measured in the transmitting room and in the ...

<Back 1 2

Related searches

Thermal insulation panel
Soundproofing panel
Boat sound proof blister
Sound proof blister
Panel
Sandwich panel
Paint
Foam
Spray paint
Anti-vibration tile

Catalog search

BELLOTTI SPA
larimar_sg_eng

Here the first page from the catalogue "larimar_sg_eng", which returns results for: thermal insulation panel

P. 1
LARIMAR® "SG" Technical data-sheet Description Larimar® "SG" is a lightweight composite panel with both skins in Okoumé marine plywood (RINA approved) or Exterior Okoumé plywood with a special re-pressed cork with rubber which has good soundproofing and thermal insulating
Meyer Werft
2010_eng

Here the first 5 pages from the catalogue "2010_eng", returning results for: thermal insulation panel

P. 43
. The modules are lined with insulation panels for better thermal insulation and soundproofing. The head ends of the blocks are then covered with tarpaulins and sealed so that the entire block is encased. The blocks undergo final preservation in the encasing. As work in the encasing is carried out almost

P. 47
> Noise levels Major noise sources at MEYER WERFT are the production buildings themselves with noise being emitted y-rougr the walls and ceilings, doors and ventilation openings. To minimise this effect, special sound-proofing measures have been applied to the shipyard's producto- hiiiirli

P. 62
with paper are compacted and sent as raw materials to the corresponding recycling companies ashore. Waste materials such as used wood and plastic are broken up and crushed on board and put to thermal utilisation in stateof-the-art incineration systems specially for ships. They fulfil the emission

P. 35
materials such as used wood, used paper and plastics etc. are sorted out and returned to the cycle of materials. All of the remaining residual waste is put to thermal or mechanical/biological utilisation. Waste 2009 in tonnes The dangerous waste products consist mainly of paint and varnish sludge, solvents

P. 64
evaporators. MEYER WERFT gives absolute priority to energy efficiency in designing these systems, so that the following procedure has become established. Seawater is sucked in from outside the ship and mixed with nonevaporated water from the fresh water generator. This recovers the thermal energy
Seemann Sub GmbH & Co. KG
2010 CATALOG

Here the first 4 pages from the catalogue "2010 CATALOG ", returning results for: thermal insulation panel

P. 10
and comfort. Infrared reflecting heat-shield technology on interior torso and 100% plush lining on non-stretch areas Ultraspan flex inserts for freedom where you move most New abrasion resistant STRETCH TEC side panels Specific lady?s sizes, shaped for a women, offering better fit

P. 15
water boots with drawstring closure for diving or other beach / water sports G-Flex Extreme Semi-dry, zipper entry 5mm T itanium insulated, contoured shape and non-slip palm Ultra Titan Gloves 3mm titanium insulated anatomically formed and ultra stretchy Stret ch D-Flex 2mm

P. 8
% and 50% in 1% increments Full watch functions Basic choice of adjustments without the need of a PC Adjustable ppO2 between 1.0 and 1.6bar Back light, visual and audible alarms T imer for Safety Stops Data can be transmitted via infrared interface (IrDA) with Dive

P. 22
22 REBEL KIDS BC T he only buoyancy compensator that ?grows? with the child, using adjustable shoulder buckles and an inter-changeable cummerbund One size fits all REBEL STEAMER 5mm with wrist and ankle zips, warm torso , plush lining and stretch panels for super comfort REBEL
SOTECOFOAM
Fenixfoam

Here the first 2 pages from the catalogue "Fenixfoam ", returning results for: thermal insulation panel

P. 3
is sheets various thickness density from 60 to 400 kg m3 the realization sandwich panels the most suitable application is as thermal acoustic insulating board trains subways buses etc b b lower densities 35 50 kg m3 can also find good application public buildings cinemas theaters hospitals where high level

P. 2
order to carry out sandwich panels high rigidity strength b b fire self protecting structural foam b
BELLOTTI SPA
lariphon

Here the first page from the catalogue "lariphon", which returns results for: thermal insulation panel

P. 1
,08 dB 27,3 29,6 31,4 Bending strenght Long grain Cross grain E-modulus Long grain Cross grain Thermal trasmission coefficient Sound insulation Rw ISO 717 7,2 9,3 11,3 248x120 - 308x151 Size tollerances in according to EN 315 On demand it is possible to evaluate panels production with tight range