Products > Material and paint > Primer for merchant ship

Primers for merchant ships

25 Products (boat or nautical equipment) | 7 Companies

Anti-corrosion primer (for merchant ships and professional boats) ANTICORROSIVA CR 956.051 Boero Yacht Coatings

Mono-component anticorrosive waterproof chlorinated-rubber undercoat, designed for underwater surfaces. It is an ideal sealer to be ...

Primer (for merchant ships and professional boats) NOXY 662.051 Boero Yacht Coatings

High quality phosphate synthetic anti rust, to be used especially ...

Anti-corrosion primer (for merchant ships and professional boats) ZN JOTUN

WaterFine ZN Primer
Two-component inorganic zinc silicate primer for long term corrosion ...

Anti-corrosion primer (for merchant ships and professional boats) JOTAMASTIC 90 JOTUN

The new generation of Jotamastic
Jotamastic 90 -- the premium repair and maintenance primer -- ...

Anti-corrosion primer (for merchant ships and professional boats) JOTACOTE UNIVERSAL JOTUN

* Specially designed as an anti- corrosive primer for newbuildings
* Special selection of pure epoxy and curing agent designed for the ...

6 products

Aluminium primer (for merchant ships and professional boats) VIKOTE™ 18 Sigma Coatings PPG PMC

High-build, aluminum-pigmented chlorinated rubber primer
Typical ...

Anti-corrosion primer (for merchant ships and professional boats) WELD™ 165 Sigma Coatings PPG PMC

VERSATILE PREFABRICATION PRIMER RANGE

SIGMAWELD™ prefabrication primers provide steel plates and sections with temporary or permanent corrosion ...

Dual-component zinc primer (for merchant ships and professional boats) MARINE™ 24 Sigma Coatings PPG PMC

Modified zinc phosphate, alkyd primer ...

7 products

Single-component primer (for merchant ships and professional boats) MINIOGUARD Attiva Marine

Antirust primer/undercoat for ...

Propeller primer (for merchant ships and professional boats) MSDS Propspeed - MYD Marine

Anyone who is concerned with excessive fuel consumption, the increase in potential engine-fatigue, the increase in running-gear ...

Zinc primer (for merchant ships and professional boats) PU ZINC (60-80-100-125-150µm, 11.85-8.90-7.10-5.70-4.75m²/L) Steelpaint

Type:
1-Component Moisture Cure Polyurethane (MCPU) zinc coat.
Basic properties:
Designed as a primer for different, highly sophisticated coating systems. Extreme adhesion and durability under extreme atmospheric and climatic conditions, can for example be used in the seawater tidal zone containing high ...

Epoxy primer (for merchant ships and professional boats) EP-PRIME 1000 epaint

is a robust, easy to use, two-part, epoxy primer recommended for immersion service. EP-Prime 1000 offers excellent ...

Related categories

Coatings for merchant ships

Related searches

Primer
Epoxy primer
Anti-corrosion primer
Single-component primer
Dual-component primer
Primer for propeller
Aluminium primer

Catalog search

Lung Teh Shipbuilding Co.
16M PILOT BOAT

Here the first page from the catalogue "16M PILOT BOAT ", which returns results for: primer

P. 18
primer ftr b r b 9fr 14
Lung Teh Shipbuilding Co.
16M PILOT BOAT

Here the first page from the catalogue "16M PILOT BOAT", which returns results for: primer

P. 18
ttfe ilfttttt fc4 l 4fett 0 primer ftrr 9fr b 14 b
Seawax Marine Coatings SAS
SEAWAX MARINE

Here the first 3 pages from the catalogue "SEAWAX MARINE", returning results for: primer

P. 2
TODAY, MAINTAINING A BOAT WHILST PROTECTING SEA LIFE AS BECOME POSSIBLE! SEAWAX MARINE COATINGS® HAS DESIGNED TWO SOLVENT AND BIOCIDE FREE AQUEOUS FORMULAS SEAWAX FOULING RELEASE® ANTIFOULING TREATMENT SEAWAX ETCH PRIMER® ETCH PRIMER R H

P. 4
SEAWAX ETCH PRIMER® Etch Primer Seawax Etch Primer® is an?eco-designed?etch primer in aqueous phase. It is a mono-component product based upon a polyurethane resin. Because it is both highly resistant and soft, it protects boat bodies against mechanical defects (cracks). Is is an ideal

P. 3
). It is efficient on soft and rigid PVC beacon ormooring buoys, when applied first Seawax Etch Primer®. It can be used on all sea boats or river boats. This coating offers very easy to apply conditions and short drying time. A deeper bright look is obtained through a satin-finish. SEAWAX MARINE COATINGS
Boero Yacht Coatings
General Catalogue 2011

Here the first 5 pages from the catalogue "General Catalogue 2011", returning results for: primer

P. 3
gamma range ANTIVEGETATIVE PAG. 05 ANTIFOULING PRIMER PAG. 11 PRIMERS STUCCHI PAG. 15 FILLERS FONDI PAG. 17 UNDERCOATS SMALTI PAG. 21 ENAMELS VERNICI PAG. 27 VARNISHES DILUENTI PAG. 30 THINNERS PRODOTTI DIVERSI PAG. 32 MIXED PRODUCTS

P. 83
.027 .001 .071 .001 .001 . 171 .001 .051 .051 .001 Le tinte riprodotte sono da considerarsi indicative. The colours are only indications. PRIMER / PRIMERS FONDI / UNDERCOATS ANTIRUGGINI / ANTIRUSTS Anchorprimer .001 Boeroguard Epoply Noxy Delta 3000 Delta UC HB .201 Epospray .001

P. 12
YachtCoatings PRIMER PRIMERS 12 Colours * 750 ml 2,5 l 001 White ? ? 750=570 ml comp. A + 180 ml comp. B 2,5=1,87 l comp. A + 630 ml comp. B * Le tinte riprodotte sono da considerarsi indicative / Indicative colour list 4 m2L 2/4 3 h /- 24 h 7 h 3:1 693 15-25% 693 max 5% TECHNICAL

P. 11
YACHT PAINT PRIMER PRIMERS 11 YachtCoatings Epozinc 632.051 PRIMER ZINCANTE EPOSSIDICO BICOMPONENTE Primer zincante epossidico bicomponente ad alto contenuto di zinco, di ottimo potere anticorrosivo e buona resistenza all?abrasione, per strutture in acciaio, emerse o immerse. Può anche

P. 14
YachtCoatings PRIMER PRIMERS 14 Colours * 250 ml 071 Green ? * Le tinte riprodotte sono da considerarsi indicative / Indicative colour list 26 m2L 1 2 h / 5 h 5 h 693 3% 693 3% TECHNICAL DATA PRIMER FOR PROPELLERS, SHAFT, OUTDRIVES Primer for bronze and light alloy propellers
Veneziani Yachting
MAINTAINING YOUR BOAT

Here the first 5 pages from the catalogue "MAINTAINING YOUR BOAT", returning results for: primer

P. 17
. Immediately afterwards apply one coat of EPOXY PRIMER. LIGHT ALLOY AND ALUMINIUM We recommend light grit blasting or abrasive discs to prepare the metal. Degrease the surfaces with DETERSIL and rinse well. The primer which should be applied is EPOXY PRIMER. If welding work has been carried out, use

P. 16
the surfaces well. If you spend a little more time and effort in the preparation phase, you will be rewarded by better, longer lasting results. The preparation phase must be followed by the application of a coat of primer. This primer will temporarily protect the surface and ensure better bonding

P. 32
using an abrasive disc or by grit blasting to remove all traces of old paint and rust. We recommend that you use the two-pack system based on EPOXY PRIMER (1 coat with a brush) and AQUASTOP (3 coats with a short pile roller) to attain a thickness of 600 microns. After the last coat

P. 12
10 Paint system with primer for one-pack A/F METAL Paint system with primer for two-pack A/F DECKHOUSE 1 coat of EPOXY PRIMER (DFT 40 microns per coat, theoretical coverage per coat 10,5 m2/L) 2 coats of PLAST0LITE PRO (DFT 100 microns per coat, theoretical coverage per coat 5,0 m2/L

P. 15
before primer 80 - 120 240 Gel coat before primer for antifouling 150 - 240 320 - 400 Gel coat before topcoat 220 - 240 360 - 400 Painted surface 150 - 220 180 - 240 Varnished surface 220 - 240 320 - 360 Two-pack fillers 40 - 80 - One-pack and knifing fillers 120 - 180 240 - 320 Barrier coats 280 - 320