|
|
Rondal's carbon fibre hatches reflect the know-how accumulated over many years of hatch building in aluminium and stainless steel. The materials used are carbon fibre prepreg and PVC foam.
Hatches up to 1000 x 1000 mm are cured in an autoclave at maximum 120 °C and 3 bar pressure. Larger hatches are cured in a separate cabin under full vacuum.
The mould set-up and the production method have been carefully chosen to ensure flexibility and high quality. As the gutter and moving part are made in one piece, almost any shape or size hatch can be built, deck camber incorporated or a (insulated) glass or perspex panel fitted. The hatch can be covered with teak or have a teak surround around the glass/perspex. |
|
Hatches in stainless steel AISI 316L, with compasses for catch in opening position.
Standard size: 500 x 500 mm
Other size on request |
|
Covers for your hatches! (perhaps with your boat logo?)
Comfort through cool/darkened rooms
No fading for years! |
|
Stainless steel hatches "INOX LINE" by Nemo Industries
Waterproof, endurance, functionality and elegance
Made of austenitic stainless steel, with a slim-line aerodynamic profile, just 19 mm higher than the cover, Nemo hatches combine aesthetic elegance with practicality of use and excellent durability:
-The welding carried out with a TIG computerized system, degreased, pickled and passivated to guarantee shine and to protect the metal cover.
-Polishing carried out by a controlled-robot so that the crystalline structure remains unaltered.
-The seals made of closed-cell thermoplastic material, they guarantee waterproofing and endurance.
-The locking handles allow the hatch to be blocked even in an intermediary position to change air. They are fitted with safety catches on the inside (in AISI stainless steel 316L) to keep out unwanted visitors.
-Beside locking handles it is possible to ask for the optional visual alarm and the outside/inside lock with key
-It is possible also to have as optional ABS ivory colored internal frame, removable mosquito-nets and darkening panels, both done in ABS too.
Aluminum hatches by Nemo Industrie
-The best materials 30 micron anodised light aluminium alloy, 10 and 12 mm thick tough unbreakable Plexiglas, marine neoprene rubber, nylon reinforced with fiberglass, austenitic steel;
-Excellent solidity made possible by the strong aluminium frames, specially designed for high resistance to bending;
-Perfect waterproofing thanks to careful welding of all the frames and to a perfect matching of the fixed and mobile parts;
-A superlative finish all surfaces and corners are carefully smoothed and rounded off. |
|
Incorporating the individual deck camber, Rondal's hinged hatches can be made in almost any shape. Choose between an aluminium top, a perspex panel, glass or an insulated glass panel.
Hatch top
- Supplied with an aluminium plate top with the possibility of covering the hatch with teak in the required thickness.
- Supplied with a perspex panel, with or without allowance for a teak border.
- Supplied with a glass panel, with or without allowance for a teak border.
Hatch drive
- Stainless steel gas spring assisted opening
- Electrically opening
Options
- Locking mechanism to be opened either from the outside, or from the inside, or both
- Separate dog lock securing device available for insertion in the dog lock to hinder unlawful entry
- Special locking gas spring to lock the hatch in any required position
- Dog locks available in aluminium or stainless steel |
|
Flush deck hatches in glass E (fibreglas under vacuum) or in carbon fibre.
A large range of standard sizes and possibility of custom sizes.It is possible to buy fittings for hatches such us hinges,dog locks etc.
Hatches suitable for decks in teak or in composite or aluminium.
Version with plexiglas or solid to be covered with teak or painted. |
|
Stockdorf/Munich. – For perfect adaptation to a boat’s design, Webasto, the leading supplier for comfort solutions on the move, has further developed its Marine sliding roof range with a flush-integrated version of its Hollandia Marine SR1.
“The Hollandia Marine SR 1 roof differentiates itself from other roofs on the market due to its high quality and great flexibility concerning size, curvature and material”, says Martin de Waal, Director Product Services of Webasto Product International NL. “The Hollandia Marine SR1 was especially designed for the extreme marine conditions such as salt and sand impacts. And it is the only true water tight roof on the market, so there is no need for a drainage system. However, we also got the requests for a flush-integrated version that allows a bigger flexibility in the design of the boat. Now our customers have the choice.”
The flush integration provides the opportunity to bring the deck at the same level as the sliding panel. Furthermore, the rear rails are located completely to the side of the roof. Last but not least, with the flush-integration, Webasto offers a smooth automotive style mechanism.
Webasto also offers completely customised roof projects, which are called Marine Engineering Services. A newly developed brochure gives interested shipyards and naval architects an insight on what is possible to do in the cooperation with the supplier Webasto. |
|
| Lewmar hatches are manufactured from the highest quality materials under approved manufacturing methods. Rigorous tests are applied to all products to ensure performance, including adhesive testing, ISO and the European Recreational Craft directive tests, and quality checks. |
|
| Allows for a hatch installation in awkward deck locations while maintaining the pleasing aesthetics of modern vessels. Ideally suited to the forepeak of smaller racing yachts when insufficient room exists for a standard round hatch. With a height above deck of only 22mm (7/8"), these attractive Slimline hatches provide an unobtrusive deck profile. |
|
| Taylor Made Products has a wide selection of boat hatches and replacement accessories to fit most model boats since 1990. |
|
Portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening |
|
"Inox Line" the stainless steel portlights by Nemo Industrie
Waterproof, resistance, adaptability and elegance
Produced in austenitic stainless steel, Nemo Inox Line portlights guarantee greater durability over time. The seals are made from close-cell neoprene for total waterproofing. The plexiglass windows are dark grey colored for better protection against the sun. The welding is pickled to ensure a lasting shine.
The new patented hinge-block ensures that the portlights can be opened to any position.
If required, we are now able to supply the portlights with a blocking system which is operated with its own key, to avoid accidental opening.
Aluminum portlights "Series 2000" by Nemo Industrie
A line of portlights in pressed, fused aluminum with innovative characteristics
The pressure of the handles during closure is regulated through a cam system and a friction-hinge which enables the glass to be opened to any point required, without the need for prefixed positions.
Profile with aluminium teeth which compresses the marine neoprene seal, guaranteeing an excellent barrier against the infiltration of water.
Top quality materials are used: the aluminium (type Peralluman) is made with a die-casting procedure (which ensures a constant and accurate control of weights), handles in nylon reinforced with fiberglass and dark-grey metacrylic plexiglass.
Installation is simple and fast, thanks to a self-centring lock system, which eliminates the need for any drilling on the deck or the hull. |
|
The Lewmar portlight ranges are styled and designed to work together providing solutions for costal and ocean power and sailing boats from a single product family. The range ensures solutions for CE Areas 1 & 2a.
Different portlights can be specified for different applications and areas of the same boat without aesthetic conflict.
|
|
| Suggested for boats and ships under m 24, nevertheless can be used on m larger boats, dependently on vessel characteristic. UG |
|
Portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening |
|
portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening |
|
We have led the field in the design and manufacture of outstanding hatches for pleasure boating. Incorporating the best materials available, stainless steel, acrylic and composite, we produce a stunning range with a low profile design and soft round edges. The hatch frames have no welded seams to maximise the strength and integrity when confronted with the worst elements at sea.
Our innovation and development capabilities have produced a durable and robust, stylish hatch that will give many years service. It is a hatch that is designed to compliment the aesthetics of any type of boat, power or sail. |
|
Maxwell Euro-styled and CE approved low profile opening portlights complement the aesthetics of any craft. Smoothly crafted extruded aluminium inner and outer frames are anodized in either silver or black finish.
Maxwell's standard 10mm (3/8") thick, smoke-grey acrylic window features a smooth bevelled edge and is fitted with glass reinforced nylon frictyion hinges and locking levers ensuring watertight integrity. The portlights come complete with insect screen, mounting screws and white moulded plastic inner dress trim to accommodate up to 40mm (1 5/8") hull/superstructure thickness. |
|
| Maxwell's attractively styled super-low profile fixed portlights feature silver or black inner and outer extruded aluminium anodized frame encapsulating a standard 10mm (3/8 inch) thick, smoke-grey acrylic window. Supplied complete with mounting screws and a white plastic dress trim for hull/superstructures up to 40mm (1 5/8 inch) thick. |
|
|
|
Portholes, Deck hatches...
