|
|
| Our non-skid marine panels for boats are made with 44o or 880 gm/m2 faces on phenolic glued high grade birch core in standard and oversize dimensions and a variety of different thicknesses. Tolerances are very tight as the product is made with excellent manufacturing techniques and machinery. Lead times are good and durability is excellent. Contact us for any details or to inquire on applications. |
|
| Soundown Vibration Damping Sheets and Tiles are a high performance, easily applied, extensional vibration dampers for reducing structural reverberant "ringing" and structureborne noise. This material is effective on a wide range of substrates, especially fiberglass, aluminum, and steel. Soundown Damping Sheets are available in 1/16", 1/8", 1/4" at 54" width, and in 1'x 1' tiles in 3/8" and 1/2". We also stock a complete line of interlayer damping materials for many applications. |
|
| Acoustiply boat panels are made with a cork rubber core composition especially formulated to reduce sound and vibration is areas that are near the engine for boats room, sub-floors, sub-decks, dividers, entertainment areas, etc. Our core material is sandwiched between marine grade plywood made to BS1088 requirements. |
|
| We stock curved plywood in a variety of thicknesses, radii and lengths. Our radii range from 50mm to 305mm in half round and quarter round shapes. Thicknesses available are 12, 15, 18 and 25mm. These components enable the corners to be made with more accuracy and trueness, versus using bendable plywood or kerfing plywood to create the curve. Select your desired radius from our website. |
|
| We strive to offer the best quality for value to our customers when it comes to structural marine grade plywood. Okoume, hydrocore and Sapele are all made to BS1088 and out Powerply line is Lloyd's certified. Our plywoods are available in a variety of thicknesses and sizes, from 1.5m to 25mm thick, 1.22 and 1.53mm wide to 2.44 and 3.05 long. |
|
| ST (Solid Teak) Decking Marine panels are available in 1.22m widths and 2.44, 3.05 and 3.66m lengths. Thicknesses in 9, 11 and 18mm although we are able to fabricate oversize and thicker panels upon request. Our manufacturing process allows us to offer these panels at competitive levels to the builder or repairer with just in time shipping. We ensure they are made with genuine teak and that the quality of the sailboat wood is FEQ, with vertical grain on face, no mineral pockets, knots or grain variations. |
|
The ultimate solution. Useful in all environments indoors and out. Manufactured from a fast-drying resilient PVC compound specially formulated for mould and meldew prevention. Low profile AQUAMAT TILES provide a fast draining, sure-grip surface. Protects boat decks, storage lockers, floors and vehicles from damage caused by impact with hard or heavy impacts. Ideal as a fatigue relief in work areas. Perfect around swimming pools and marinas where slippery surfaces may be a liability. 6 Tiles Per Pack.
|
|
SIMILTECK STAVES Since 1994 Martini Marinas produces Similteck staves, a special polypropylene resin, using the technology of injection moulding.Beside being a solution against the tropical deforestation, in compliance with the ISO 9004:2000 regulation that recommends the analysis of the impact of the product on the natural resources, the Similteck staves by Martini Marinas offers numerous advantages:
- Absolute absence of splinters - No metallic screws. - Radiating section. The Similteck staves are injection moulded and have a radiating section that dissipates the accumulated heat under the solar radiation, whilst others extruded plastic staves available on the market have full section, and become very hot when exposed to the sun in the summery months. - Non-slip and antimycotic surface - Elastic and silent walking - Maintenance free
|
|
| Our selection of fine woods ensure your build is a complete success. Genine FEQ grade teak and Pattern Mahogany are our specialty. We offer a vast range of exotic and domestic woods for all applications of your project, including Sparr Grade Sitka Spruce for boat masts, wide and long sailboat cover boat boards for sportfish boats, thick and long rail stock, true vertical grain decking strips, matching lumber for interior trim and fine inlay woods for custom applications. |
|
Constructed in multiple layers with a smooth surface, Vinyl Teak-Holly is composed of polyvinyl chloride (PVC) resin for boat, plasticizers, fillers, and pigments.
The co-calendared wear layer is formulated to provide maximum resistance to foot traffic and most commercial & healthcare chemicals. The middle layer provides dimensional stability, sound-absorbing properties, and resiliency under foot. The backing layer provides strength and stability of the marine flooring and enhances the bonding strength of the adhesive. |
|
| MarineLam cabin sole marine flooring is available in a variety of different patterns, Teak & Holly, Teak & Black, Cherry & Holly, Cherry & Black, Mahogany & Black and Sapele & Holly. It is a High Pressure Laminate with a scratch resistant surface that is impervious to water and had excellent durability. These sheets can be rolled and shipped in tubes approximately 305mm in diameter by 1220mm long. |
|
| Here you can see a variety of flooring options available in wood for boats, laminate or vinyl. We have a variety of different options in stock and are capable of making custom cabin sole, like walnut and ash, like the picture you see. |
|
THE PRINCIPAL COMPONENT OF “SEACORK” Manufactured from the outer clinging bark of the English White Oak, cork is the name given to this incredible external cellular substance. Seacork is the choice of professional and recreational boat manufacturers. It is the best alternative to all traditional boat decking.
SEACORK,THE MOST DURABLE AND LIGHTEST OF ALL ALTERNATIVE MARINE DECKING, can be installed on any vessel., Fiberglass, Steel, Aluminium or Wood.
THE NATURAL PROPERTIES OF CORK, LIGHTNESS, DURABILITY, EXTREME WEATHER RESISTANCE, STRENGTH AND FLEXIBILITY, coupled with the ease of installation, makes SEACORK the deck surface of choice.
SOFT UNDER FOOT AND NON SLIP WHEN WET, this superior product, combining its natural cushioning properties with its non-skid attributes, provides the safest of surfaces under foot imaginable.
A NATURAL INSULATOR OF HEAT AND SOUND, the installation of SEA CORK will help silence above deck noise, quite engine for boats sound levels and insulate the below deck area from the intense heat of the sun, providing a more user friendlier environment.
IMPERVIOUS TO STAINING, WITH EXTREME DURABILITY, virtually impervious to all chemicals normally associated with marine use, as well as nail polish, and high heels. Impact resistant with amazing recovery.
EASY TO INSTALL AND REPAIR, with a minimum of tools, the installation of SEACORK can be accomplished by most individuals.
|
|
| TBS offer a complete range of non slip covering answering to expectations and restraint thicknesses, 2 laying process and 12 colours. |
|
| HYDRO-TURF offers sheets of non-slip marine flooring in 4 textures and 20 colors. 5.5mm thick for extra comfort. Add 3M PSA for easy installation. |
|
| The OVERDECK® coating system is an expert combination of traditional shipbuilding craft and the superior functionality of the latest plastics technologies. It is a patented coating system for producing non-slip coatings of up to 2 mm which consist of a two component liquid plastic in a laying template based on traditional teak decks on yachts made from modern materials such as GFK, steel, aluminium and sandwich-type materials. |
|
| Our non-skid marine marine panels are made with 44o or 880 gm/m2 faces on phenolic glued high grade birch core in standard and oversize dimensions and a variety of different thicknesses. Tolerances are very tight as the product is made with excellent manufacturing techniques and machinery. Lead times are good and durability is excellent. Contact us for any details or to inquire on applications. |
|
| We strive to offer the best quality for value to our customers when it comes to decorative plywood. Our plywoods are available in a variety of thicknesses and sizes, from 1.5m to 25mm thick, 1.22 and 1.53mm wide to 2.44 and 3.05 long and any decorative specie of wood for boat on the surface. Sequenced marine panels are also numbered for your convenience. Decorative plywoods are made with marine or lightweight cores, saving you time and money in the interior areas of your boat project. Some of our plywoods are 1/3 lighter than conventional plywood. |
|
| We strive to offer the best quality for value to our customers when it comes to structural marine grade plywood. Okoume, hydrocore and Sapele are all made to BS1088 and out Powerply line is Lloyd's certified. Our plywoods are available in a variety of thicknesses and sizes, from 1.5m to 25mm thick, 1.22 and 1.53mm wide to 2.44 and 3.05 long. |
|
Light weights for heavy tasks.
The latest challenges for today's designers: Not only thinner and lighter, but also thicker and lighter - for elements, furniture-making and also in the interior fittings sector. Moralt Lightwood Boat boards are the perfect solution whenever weight plays a role in furniture design. However, these Moralt boards are not one-trick ponies: they offer excellent loading capacity strength, stability and a smooth working surface.
New in our program: The Balsaboard Lightwood.
The core of this board consists of an end grain Balsa-core, guaranteeing a high compressive strength and at the same time a very low weight. The perfect base for contemporary products, including for example the Moralt Sandwich construction products with lamincores.
- end grain core made of Balsa (Ochroma Lagopus)
- a high vertical pressure resistance on the board`s surface
- available with thin MDF-Face or cross grain veneers |
|
A light core and a good looking product! The new designing trend in the furniture-making and interior fittings industries.This panel for boat is thick and stable yet light in weight, whilst
also being made of solid timber.
The end grain core made of Balsa provides the low weight at high
compressive strength. The Spruce lamincore on either side provides good resistance to screw pull-out as well as high lengthwise stability |
|
Up and coming decorative surfaces
The decorative Moralt marine boards combine long-term resilience with natural beauty. High stability with creative designs. Smooth surfaces with modern aesthetics.
Multifuntional Panel for boat Deco:
- with chipboard or MDF-Face
- available in product and product combination
- colour-match decors
- contemporary surface structures |
|
Working with the nature and not against it!
For all our customers who want more than the legal guidelines, we offer something special:
- Cores and Faces made of regional timbers
- Block for boat and Laminboards made of spruce / fir
- Covered with poplar
Contact with comestibles:
We confirm the innocuousness of these marine panels in the contact with foodstuffs.
Eco-label "Blue Angel" (Blauer Engel):
We confirm the special environmental friendliness of these panels, certified by the German environmental label "Blauer Engel". |
|
| Proven construction with technical perfection. The blockcore: 30 mm thick solid wood battens that are each glued together. Solid wood finished with various appropriate faces for the most diverse applications. The Classics with excellent processing properties and a favourable price. |
|
The noise excluder: for peace and quiet
A special noise-reducing core in this Sandwich element provides this board for boats with outstanding acoustic properties.
Choose a face material of either an Exterior grade MDF or a long-grain face veneer.
By the way, we can also offer a long- or cross-grain veneer with an aluminium moisture barrier. |
|
|
|
Floor coatings, Building woods
