|
|
Armstrong Deckplates protect your boat, your marine equipment and your reputation by completely sealing against water intrusion. Easy to install and completely watertight, Armstrong Deckplates provide easy access to behind bulkheads, radar arches, wire ways, motor wells, or anywhere else.
Additional Features…
• No trim ring to install
• No boat fasteners
• No sealant or caulking
• No clean-up
• No lost, broken, or dirty parts
• Easy installation
• Tool-free operation
|
|
| Barton offer a wide range of inspection sailboat covers in half turn, screw and push fit versions. Round and square versions are included. |
|
Until now, filling your tank automatically meant fuel spillage into the port. However, thanks to the new anti overspill Econab deck-entry, this is no longer the case for boats.
Filling your tank will become as easy as filling your car.
When the tank is full, the nozzle will automatically stop the fuelling process!
- Ecological (zero spillage)
- Avoids smells and dirt
- Easy to install
- Can be assembled on new or existing boats
- Anti theft grid
- Can be used for all types of fuel
- Can be installed on all types of boats
- Can be fitted in place of the standard deck entry |
|
NSD-10 R or L, NSDX-10 R or L FOR DOWNWARD-OPENING FLAP
NSD-20 R or L, NSDX-20 R or L FOR TOP-OPENING FLAP
NSD-35 R or L, NSDX-35 R or L FOR UPWARD-OPENING FLAP
*Keeps flap/lid from slamming down or flying open.
*Recognized by LGA for 50,000 cycles.
*Opening/Closing speed adjustable.
*Opening angle is adjustable by changing mounting position.
*Handed-Choose Right and Left versions for your application.
*Calculate the appropriate torque for your application.
(See our websites for more information.)
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK website under construction.
E-mail: export@sugatsune.co.jp
|
|
EB-303/EP
FOLDING BRACKET
Material: 304 Stainless Steel
Finish: Electro Polished
(Screws not included.)
Load Capacity: 150 kg (330 lbs)
Length: 305.5mm, Width: 20-29 mm, Height: 165 mm
Visit our websites for other brackets.
http://www.sugatsune.co.jp (Japan)
http://www.sugatsune.com (USA)
http://www.sugatsune.net (USA, Industrial)
|
|
FULL MORTISE TEMPLATE HINGE
3535, 4040, 4545 (3.5"X3.5", 4"X4", 4.5"X4.5")
Material: Brass
Finish: Polished Brass (PB)
Chrome (CR)
Supplied with Screws
Meets ANSI specs.
OR with Ball Marine bearings -- 4040B, 4545B
Ball bearings contained in 2 rings for boats ensure smooth movement and durability.
Perfectly extruded material ensures even thickness with smooth edges.
Special clear lacquer is used for extra-hard surface and extra-long protection.
Material: Polished Brass (PB)
Satin Chrome (SC)
Antique Brass (AB)
Finials also available.
VISIT OUR WEBSITES FOR MORE INFORMATION:
www.sugatsune.co.jp (Sugatsune Japan)
www.sugatsune.com (Sugatsune America)
www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK site now under construction.
E-mail: export@sugatsune.co.jp
|
|
Attractive flush-mount styling, a recessed handle, and concealed mounting hardware give these marine latches an appealing look. A solid feel and push-to-close convenience give them appealing functionality. And corrosion-resistant construction keeps them looking and functioning beautifully for a long time, even in outdoor applications.
Product Features and Benefits
Installs easily from front of panel through single round-hole, and attaches from rear with mounting bracket and hardware. Fits flush to panel when installed, with minimal protrusion inside of cabinet.
- Slightly angled pawl ensures tight grip on keeper within tolerances
- Spring loaded handle helps prevent rattles
- Provides tab for inside actuation whether locked or unlocked
- Available in polycarbonate and stainless steel corrosion-resistant materials for long-life performance
- Available in two sizes to accommodate larger/thicker marine panels |
|
304 B Series STAINLESS STEEL CONCEALED HINGE
(Stainless Steel Mount sold separately)
304B-46/9, 304B-46/14, 304B-46/19 Free swinging
304B-C46/9, 304B-C46/14, 304B-C46/19 Self-Closing
Material: 304 Stainless Steel, Polished Finish
Sugatsune has a wide range of concealed marine hinges for industrial, furniture for boats, or architectural applications.
Please visit our website or our PDF catalogues here for further information about these and other similar products.
Many Stainless Steel Concealed Hinges Available.
|
|
JH-25 or JH-35 Soft-Close Dampening Hinge
(Catalogue #152, Page 181)
Bracket: PB Plastic
Cap: Polypropylene
Damper: 304 Stainless Steel
Colour: Dark Grey
(Screws not included)
JH-25 Torque per Pair: 31-51 kgf/cm (27-44 lbs/inch)
JH-35 Torque per Pair: 51-71 kgf/cm (44-61 lbs/inch)
Soft-close damper keeps lid from slamming shut
Operating Temperature: 0~40C (32~104F)
Operating angle: 115 degrees / Dead angle: 5 degrees
A-type damper: Damper works counterclockwise
B-type damper: Damper works clockwise
Sold per pair(Each of A/B type)
Visit our websites for more dampening marine hinges and dampers.
http://www.sugatsune.co.jp
http://www.sugatsune.net
http://www.sugatsune.com
E-mail: export@sugatsune.co.jp
|
|
For 2" I.D. hose. These deck fills are both imprinted and color-coded to specify either gas or diesel. Highly polished finish. Flush cap is slotted for separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain for boat. Long neck accommodates thick deck laminations. Key sold separately.
|
|
Quality and style are the essence of the McCoy Series of entry door for boats locks. They provide a solid feel for actuation and offer a variety of finishes in 100% marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging door installations.
Product Features and Benefits
Durable lock mechanisms offer a variety of features for performance and aesthetics in upscale applications. They eliminate visible mounting hardware on the front or back of the door for a more elegant presentation.
- McCoy double-spring design (one for pawl, one for handle) provides low closing forces, a solid feel on actuation, and keeps door handles level, even when using heavier handles
- Optional Star Lock design includes a three-axis star key and six-pin tumbler lock for increased security; hooked deadbolt design prevents door from being lifted off
- Integrated keyhole shutter protects against water or dirt intrusion
- McCoy family is integrated within "One Look-One Lock" design to share the same aesthetics and key code compatibility with other complementary hardware
- Locks, handles, and trim are available in dozens of styles with finish options to match the aesthetics of any application
- Available to fit a range of door thicknesses |
|
OVERHANG DOOR FOR BOAT LEVER LATCH
LL-66
Available in Brown or White Polymide
(316 Stainless Steel version coming soon.)
LEVER LATCH
Material: Latch-Body - Polyamide
Color: White (WHT), Brown (BRN)
Lever - Polyamide
Counter Plate for boat - Steel
Supplied with screws (4x12)
Holding force: 20 kg (44 lbs)
VISIT OUR WEBSITES FOR MORE INFORMATION:
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
e-mail: export@sugatsune.co.jp
LL-66 Information: Sugatsune Catalogue #108, Page 141
|
|
TENSION CATCH
Tension Catch
Material: 316 stainless steel
Finish: Polished
|
|
Lever-actuated operation creates over-center action, and the simple, attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism, to prevent accidental opening. Multiple sizes, finishes, keeper designs, and other options satisfy a variety of application requirements.
Product Features and Benefits
The curved latching blade provides built-in tension and flexing to absorb shock, vibration, or variations in mounting dimensions, without additional visible springs. Folding down the lever pulls mating in-line panels for boats tight.
- A variety of keepers and latch tab styles are available for different application requirements
- Multiple material and finish options satisfy different installation environments
- Added security options available |
|
STAINLESS STEEL RING FOR BOAT PULL
Material: 316 stainless steel
Finish : Polished
No screws included. Recommended screw size 3.5mm
|
|
Durable and stylish recessed pull provides a convenient grip to dress up any heavier door or drawer application. Two-piece recessed cup design sandwiches the door panel to provide ample space for a full-handed, two-knuckle-deep grip, with minimal protrusion from front of panel.
Product Features and Benefits
This black ABS body uses a two-piece design to provide ample gripping space with a clean, flush-mount panel presentation.
- Simple single-hole mounting - flush face slides through panel, cup attaches from back side with concealed self-tapping mounting screws
- Can be used for lifting, pulling, sliding or pushing boat doors or drawers
- Lifting load on pull transfers directly to panel edge
- Multiple models accommodates panels for boats from 1 mm (.04") up to 6.3 mm (.25") thick
- Provides maximum working load of 1,300 N (300 lbs.) for lifting/pulling applications |
|
The simple, yet efficient design of the Snappy Latch provides for positive latch engagement with a simple push-to-close motion, then releases automatically when the panel for boats is lifted. The user never even touches the latch. It's a great choice for applications requiring frequent access with an economy of motion.
Product Features and Benefits
The self-actuating design of the fully concealed Snappy Panel Latch makes it one of the easiest marine latches to use. Its self-adjusting pawl automatically accommodates misalignment.
- Combination sliding/pivoting action enables latch to engage, hold, and disengage as user closes and opens door
- Built-in self-correcting feature automatically resets latch to function properly, even if deadbolt is forced out of normal position
- Over-center latching action holds panel closed firmly, to reduce noisy vibration
- Non-corrosive materials suitable for exposed applications |
|
Choose push-to-close, twist-to-open convenience in an elegant design that actually enhances performance. An anti-vibration feature keeps enclosures quiet, despite normal vibrations. This highly designed latch is offered in two different mechanisms, and multiple finishes, for door and for drawer applications.
Product Features and Benefits
The sturdy design and construction of this stylish latch provides both aesthetic and functional benefits for vibration-susceptible applications. A secondary slide mechanism applies spring tension to dampen the effects of vibration.
- Type 1 mechanism designed for door applications
- Type 2 mechanism designed for drawer applications
- Rear-fastening design leaves front of latch and panel for boat free of mounting hardware
- Tab on back of latch permits actuation from inside of enclosure
- Fits panel thicknesses from 3 mm (.118") to 22.5 mm (.875")
- Accommodates grip dimensions from 23 mm (.875") to 33 mm (1.313")
- Rear-mounting keeper provides screw-activated grip adjustment |
|
When you want to mount and/or actuate a push-to-close latch from a variety of angles or locations, the Sundecker Panel for boat Latch provides loads of versatility. The substantially sized latch body tolerates strong pulling forces, and the remote latch actuation option helps keep latch points free from external hardware.
Product Features and Benefits
The basic push-to-close slide mechanism in this latch is enhanced with a strong body design and multiple latch and release options to create a versatile concealed latch solution for applications where smaller marine latches just don't work.
- Actuator strap ( 1 meter/39" long) attaches at rear of latch but can be bent and routed to pull from various angles
- Actuator strap style assembly ships with loop strap release, angled strap protector, and latch striker
- Eyelet connection style provides an attachment point for a cable actuation system
- Strong body construction withstands greater pulling force for opening
- Latch bolts to inside of enclosure, out of sight
- All marine-grade materials |
|
Parrot Panel Marine latches are a quick and easy choice for installation on interior or exterior marine panels that overhang their mating surface. Design enables you to disengage latch and open panel with a single continuous motion. A silicone bumper dampens the sound of the latch when closing, for true "slam-to-close" convenience.
Product Features and Benefits
The broad spring-loaded handle provides a convenient grip for opening, while the dampening pad softens the sound of slamming the latch closed.
- Designed specifically to mount on overhanging panels, enabling latch to be fully or partially concealed
- Easy to install vertically or horizontally, in right angle or even oblique angle installations
- Slotted striker plate mounting allows grip adjustment for positive latching
- Polycarbonate/ABS handles provide multiple finish options
- All corrosion-resistant materials make this a good choice for exposed installations |
|
ELEGANCE AND FUNCTIONALITY
The Star line includes marine hinges and marine latches in 316 stainless steel with a high gloss finish in a wide range of models and sizes; their modular solution allows interchangeable between hinges shapes. The same style is used for marine cleats and marine bollards to offer unique design for deck hardware. The solid shine of the stainless steel makes them ideal accessories for high class interior and exterior applications, where details make the difference.
|
|
LIFT-OFF HINGE
Lift-Off Hinge
Material: 304 stainless steel
Finish: Satin
Screws not included
|
|
100 Series Butt Hinge
Material: Brass
Finish: Polished Brass (PB)
Satin Nickel (SN)
Chrome(CR)
Supplied with screws. |
|
|
|