Products > Marine Electronics > NMEA Network

NMEA Networks

35 Products (boat or nautical equipment) | 8 Companies

Boat NMEA interface 90-60-357 NKE

The function of the NMEA output INTERFACE is to convert the data present on the TOPLINE BUS into NMEA format so that all the devices communicate with one another.

The function ...

Boat NMEA interface 90-60-360 NKE

The NMEA input interface allows the connection to the Topline bus of any instrument fitted with an NMEA 0183 output (GPS, PC, etc.). It is a one-way communication gateway, which converts the NMEA ...

Boat NMEA 2000 networking (T connector) Garmin

Add components to your ...

Boat NMEA interface (for AC / DC power supply) RIM100 Maretron

Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally as well for monitoring ...

Boat NMEA interface (for AC power supply) ACM100 Maretron

Maretron's ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. ACM100 output information is then displayed with networked ...

Boat NMEA interface (for DC power supply) DCM100 Maretron

Maretron's DCM100 DC Monitor is an advanced electronic
monitoring device used to measure the voltage and current of any direct
current (DC) power source or load. Examples of DC power sources that can be
monitored with the DCM100 include batteries, alternators, solar panels, and
wind generators. The DCM100 can also be used to monitor ...

8 products

Boat engine control unit (NMEA 2000®) EMU-1 (currently prototype) Actisense

Actisense, the market leading marine electronics brand from Active Research Limited, based in Poole, UK, will soon be releasing the new EMU-1. The device is a specialised Analogue to NMEA 2000 Interface, designed to operate specifically with engines.

Working in conjunction with ...

NMEA network connection box for boats QNB-1-PMW (NMEA 2000) Actisense

Quick Network Block with 6 micro female drops
QNB-1-PMW

Actisense ...

Boat NMEA 2000 networking (panel mount connector) A2K-PMW-F and A2K-PMW-M Actisense

NMEA 2000 (Micro) Rear PMW connectors
The flexible Panel Mount Wired (PMW) connectors allow NMEA 2000 installations ...

9 products

Boat NMEA interface NM-DS1 nuova marea ltd

Field Number:
1) Transducer Type
2) Status data:
x=0 when voltage at input channel is less than ...

Boat NMEA interface NM-500AD nuova marea ltd

The ANALOG/DIGITAL interface consists of 16 discrete and 8 analog inputs.
A custom NMEA sentence ...

Boat NMEA multiplexer NM-281A nuova marea ltd

The NM-281A is a two channel NMEA-0183 input / seven or eight channels NMEA-0183 output multiplier. It enables data distribution from two NM-0183 sources ...

1 product

Boat NMEA interface (wireless) NMEA-2-WIFI Comar Systems

The NMEA-2-WIFI unit provides a low cost method of setting up a wireless network on board and to use available Apps on your iPhone, iPad or PC to display all your electronic data including position, AIS data, depth, wind, compass etc.

Simple to set up, the NMEA-2-WIFI unit has 2 ...

Boat NMEA interface NC20 Cruzpro

The CruzPro NC20 NMEA combiner accepts up to 4 or 8 channels of NMEA (and/or RS232) serial data at 4800 BAUD and combines these signals onto one RS232 compatible output line at either 4800 or 9600 BAUD (selectable).

The NC20 can handle any mix of NMEA and RS232 input signals ...

NMEA network connection box for boats NT920HDI Navitron

The NT920HDI converts serial heading data received from different types of proprietary heading transmission sources (electronic ...

NMEA network connection box for boats NT922HDI Navitron

The NT922HDI provides conversion functions from NMEA Heading data to 5Vp/p Step by Step and from single channel NMEA Heading data to dual channel ...

NMEA network connection box for boats NT925HDI Navitron

BSH Type Approved for stand alone (independent system) use with azimuth tracking units of all kinds (radars, trackplotters, antenna alignment systems, nav computers etc.) and Wheelmark approved for use with ...

Related categories

Speakers, Audio amplifiers for boats
Boat software
Marine screens for boats
Computer hardware for boats
Audio players for boats
Marine screens for yachts
Computer hardware for yachts
TV for boats

Related searches

NMEA interface
NMEA connection box
NMEA 2000 interface
NMEA multiplexer
NMEA gateway
NMEA buffer
Interface
Multiplexer
Multiplexer for yachts
Multiplexer for ships
Control unit

Catalog search

Windpilot
SELFSTEERING UNDER SAIL

Here the first 3 pages from the catalogue "SELFSTEERING UNDER SAIL", returning results for: nmea interface

P. 22
22 today most autopilots operate as one module within complex system nmea national marine electronics association interfaces offer the prospect expanding such system to include instruments from other manufacturers the claim that instruments from different system suppliers could communicate

P. 123
centres b segatron b this small volume high quality german manufacturer has been existence some 28 years now the company its five employees build small number premium autopilots every year predominantly use maxis including jongert yachts segatron systems naturally incorporate an nmea interfaces to allow

P. 21
windvane compass signal eg autohelm 800 2 systems which are linked to other modules via data bus eg seatalk from autohelm robnet robertson an nmea 0183 interface 3 systems which individual modules are linked exclusively the manufacturer s data bus b g
EES
TRIPCON LOGBOOK

Here the first 4 pages from the catalogue "TRIPCON LOGBOOK", returning results for: nmea interface

P. 5
Easily configure TripCon ?h Activation of the NMEA data interface The configuration of the NMEA-data is imaginably easy. ?h The customer chooses the COM-Ports (IN) on which the NMEA data abut. TripCon then identifies automatically which parameters are available ?h For the use of data

P. 4
? and that?s how TripCon works. The TripConsole ?h all data at a glance ?h capturing, processing and saving NMEA-parameters ?h adding of image, audio and text information ?h administration of vessel, crew and legs In the TripConsole customers can read off the current values of their board

P. 2
Optional products TripCon ? GPS Software option for the following functions: ?h capturing, processing and saving of the NMEA-parameters for position, speed and heading over ground ?h calculation of the reclined distance out of position differences ?h autolog function, time and event based

P. 1
system ?h completion of the logbook function by MOB-supervision ?h sharing of the NMEA-data with navigation programs (or other applications) via attached COM-Port splitting function TripCon ? editions and software modules The basic version TripCon 2 ?The digital Logbook ?h basic version
AFI
Global Marine catalog

Here the first 5 pages from the catalogue "Global Marine catalog", returning results for: nmea interface

P. 160
, such as a NMEA2000 or Modbus network, and vice versa. All interfaces (and modules) can be installed in various ways, from DIN rails to surface mounting. Available in ten languages: English, Dutch, German, French, Spanish, Italian, Norwegian, Swedish, Finnish and Danish. USB Interface Modbus Interface Inverter

P. 165
Switch control for light one Signal Interface Manage: CZone™ Digital Control & Monitoring TM Manage | CZone™ NMEA 2000 Configuration Versatility & Security Network We provide the tools to help you determine the modules needed The CZone™ system, designed for 9-32V systems, features

P. 177
Manage: CZone™ Digital Control Accessories TM Ext. Cable Power Cable for Display Interface, 2 Pin, 2 Meters Manage | CZone™ NMEA 2000 Micro C Accessories Power Cable • 6.5 ft, 2 meters • NMEA 2000 Network • 3.2 ft, 1 meters Item # 80-911-0032-00 Item # 80

P. 172
Interface w/seals, connector Signal Interface only CAN Network Status Indicator Signal Status Indicator Terminal Block Waterproof Cable Seal 172 Manage.indd 172 toll free 800.307.6702 MASTERVOLT | mastervolt.us NMEA 2000 Connector MARINCO | marinco.com 9/28/11 12:57 PM

P. 171
Manage: CZone™ Digital Control & Monitoring TM Manage | CZone™ Switch Control Interface The Switch Control Interface (SCI) provides an interface between the CZone™ network and traditional mechanical switches that manufacturers and users are familiar with. This interface converts
QLMarine
sailboat guide

Here the first 5 pages from the catalogue "sailboat guide", returning results for: nmea interface

P. 37
main kit b trip computer software nmea 2000 interface b active corrosion protection kit b active corrosion protection main unit software included drivability main kit aquamatic b drivability main kit comfort main kit economy main kit display kit 1 b twin engine powertrim assistant singlelever mode trip

P. 33
you all the engine data you need logically displayed up to three engines one screen the 4 display is an information center one two engines pushbuttons easy navigation not available d1 d2 depending transmission requires sensors standard o optional requires extra sensor nmea interface requires extra sensor volvo penta

P. 32
trip computer functionality available data see the table b engine data plotter b the nmea 2000 interface combined compatible chart plotter is complementary to multiinformation display it makes it possible to display engine data alarms the plotter the fuel economy view gives you detailed information

P. 15
diesel aquamatic b evc features b electronic controls shift throttle engine protection engine monitoring engine diagnostics engine synchronization up to 4 helm stations transmission protection engine alarms text plugin instrument installation nmea 2000 interface o trip computer o instrumentation

P. 17
monitoring engine diagnostics engine synchronization transmission protection engine alarms text plugin instrument installation nmea 2000 interface o trip computer o instrumentation dimmer depth seawater temp speed o towmode 4 o 9658 cruise control o 9632 singlelever mode 1 o joystick 2 3 o docking station 2
Autronica Fire and Security
PC2012_MAR_screen.pdf

Here the first 5 pages from the catalogue "PC2012_MAR_screen.pdf", returning results for: nmea interface

P. 45
Part number Description 116-PROG-AM-MOD-HERNIS Hernis CCTV interface – Interface enables use of AutroMaster together with video cameras and servers from Hernis. 116-PROG-AM-MOD-NMEA NMEA interface – A protocol used for interface in between maritime electronic equipment, and Autro

P. 43
3 CD CD CD 3 O »< fi) 2 fi) CO CD B CD (7) »< (/) CD 3 Interfaces Hernis CCTV interface System-S interface NMEA interface Saia PLC support VDR output Siemens S7 PLC support MODBUS interface

P. 14
recording systems. Converts standard AutroSafe AutroCom messages to NMEA-0183 standards-compliant strings, allowing events to be written to the VDR. Degree of protection: IP20 116-BSL-337 14 n Part number 116-BSD-321/1 Image AutroSafe BU-70 interface module Enables the connection of BU-70/BU-100/BU-101

P. 42
of an emergency. Graphical user interface The AutroMaster provides an intuitive control and monitoring interface built to save valuable time when every second counts. Status information is displayed in real-time with easy-to-understand graphical representation. Navigation is fast and instinctual and the powerful

P. 27
Loop units Input and output units (cont.) • • IP65 2/1 • • IP67 1/1 • • IP67 Will be released by bulletin • • IP54 IP67 For interfacing external units, clean contacts, alarm relays, etc. Zones 0, 1 & 2 • IP54 IP67 For interfacing external units