|
|
| CHC 1102 M, is the new hand held chain for boat counter supplied with integrated LED light as standard. CHC 1102 M is supplied with a connecting cable extensible up to 4,2 m, watertight deck plug and socket and a neat stowage bracket. CHC 1102 M is patented product. |
|
The REPEAT 3100 delivers all the information available from any of Navman's 3100 Series instruments and NMEA data from virtually any other instrument.
A simple solution to repeat a mix of data in multiple locations. In addition, the REPEAT 3100 can be used as a MARINE GPS repeater for Navman GPS or any other GPS receiver for boat (NMEA compatible). |
|
Optimized wind indication available instantly in 'analog' or digital display, with large backlit digits for excellent visibility.
Port and starboard color coding, combined with 'Locked-Angle' function, contribute to easier steering to a pre-selected wind angle. |
|
SeeLeveL 709, multi tank monitor system
This system provides an outstanding balance between low cost and full features. Instead of single points that give you only a close appr. of how full your boat tanks are this system offers a continuous level and shows an actual number, in percent of full.
Measures tanks up to 300 mm tall with a single sender or 600 mm tall with dual senders. 3 sender boards for boats are included.
Art No 970213 |
|
Gobius 4WF - For water- or diesel tanks for boats in stainless steel, steel, plastic and aluminium
All Gobius products measure from the outside, avoiding the need of to take the tank apart and drill unnecessary holes.
- Very easy to use
- Traffc lights for boats boat lamps show the current liquid level
- Automatically checking the level
- No extra service is needed
- Extremely low electricity consumption
Gobius is easy to install
On the sensors there are strips of tape that are provided to attach the sensors directly onto the surface of your tank. The panel for boats may be placed in the pentry or at the electric control panel. All necessary cables and plugs needed to connect the sensors and panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds, all you need to do is to press a button while the tank is full.
Extremely low electricity consumption, less than 40 mA (12 volts)
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft’s battery.
Art No 970381 Gobius 4WF for tanks in stainless steel, steel & aluminium
Art No 970193 Gobius 4WF for tanks in plastic |
|
SeeLeveL 713, multi tank monitor system
No buttons to push! The level of each tank, plus the outside temperature, is shown individually. 713 provides accurate tank level information in percentage of full. Measures boat tanks up to 430 mm tall with a single sender or 840 mm tall with dual senders. 3 sender marine boards are included.
Art No 970220 |
|
Gobius 4 for marine holding tanks in stainless steel, steel, plastic & aluminium
Gobius has been developed to meet the demand from those boat owners who want more information, those who not only want to know when the tank is full.
All Gobius products measure from the outside.
-Coloured marine lamps show the current fluid level
-You avoid the struggle with taking the tank apart
-No extra drilling of hole
-No need for extra service
-Extremely low electricity consumption, less than 40 mA
-Good for everybody: boat owners and environment
Gobius is easy to install
On the sensors there are strips of tape that are provided to attach the sensors directly onto the surface of your tank. The panel for boat may be placed in the washroom. All necessary marine cables and plugs needed to connect the sensors and panel with the control unit are included.
Very easy to calibrate
No tanks for boats look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds, all you need to do is to press a button while the tank is empty.
Extremely low electricity consumption, less than 40 mA (12 volts)
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft's battery for boats.
Art No 970091 Gobius 4RFP for tanks in stainless steel, steel & aluminium
Art No 970053 Gobius 4RFP for tanks in plastic |
|
SeeLeveL 707, multi tank monitor system for plastic boat tanks
This level gauge has an easy to read LED display. Display fresh, gray, or black tank levels at the press of a button. 9 segmented display gives accuracy to 1/8 (12.5%) of a tank. Orange and red marine indicators are used for low and empty level warnings for the fresh water tank. Orange and red indicators are used for high and full level warnings for the gray and black marine water tanks. 3 sender marine boards are included.
Art No 970206 |
|
Our programmable fluid level monitors provide reliable and accurate Tank level indication.
There are no moving parts to foul, or electrical components inside the tank. Unaffected by floating solids or stray current, Tank Sentry is the ideal solution for the toughest of fluid level monitoring assignments.
All Tank Sentries operate on 12 to 32 volt DC power. With a few simple adjustments they are capable of monitoring marine tanks from 6 inches to 6 feet deep, right out of the box. All models have 10% incremental LED displays.
All units include a monitor panel for boats, 30 feet per tank of shielded 18/3 wire, 1 SYM-2Q sensor module per tank, 10 feet of urethane tubing per tank, 1 TPA-1250 1-1/4" tank penetration assembly per tank, and 3 heat shrink wire marine connectors. Installation accessories such as extra wire, mounting flanges, and pump for boat relays are sold separately.
|
|
| Fireboy®-Xintex® has designed a line of liquid level gauges that are built to the quality standards of all our marine equipment. Senders are available for either threaded or flanged top-of-tank installation. Choose either one-tank or two-tank monitors with appropriate threaded or flanged senders. Order online or call our factory at 1-866-350-9500 for Assistance and Technical Information. Not interchangeable with the WTG System Series, which are three-wire connections. (These items have two-wire hook-ups.) |
|
In addition to providing complete management of your vessel's fuel flow and fuel remaining, Navman's Fuel 3100 utilizes speed data from GPS FOR BOATS or paddlewheel input to calculate real-time fuel economy data. The Fuel 3100 can be programmed to display these values in miles per gallon or litre.
This important information allows you to determine the optimum throttle and trim settings for single and twin engine boats. This will save you money on fuel and minimize long-term engine wear by running your engines for boats at their most efficient settings. |
|
| A variety of Tohatsu gauges are available through your local dealer; hour meters, speedometers, tilt/trim gauges, Analog and LCD tachometers and even multi-function LCD gauges. All manufactured to Tohatsu's precision standards. See your dealer for a complete list of all Tohatsu gauges available for your outboard. |
|
Our award winning ST60 instruments made better! The ST60 Plus instrument line features new mounting bezels that compliment Raymarine%u2019s popular C-Series and E-Series multifunction navigation displays. ST60 Plus offers everything from stand-alone display units to sophisticated, fully integrated systems with intelligent repeaters, marine remote controls and flexible mounting options. Significantly enhanced displays ensure superior viewing angles for both day and night conditions. Simple, push-button controls make ST60 Plus instruments extremely easy to use.
|
|
| A variety of Tohatsu gauges are available through your local dealer; hour meters, speedometers, tilt/trim gauges, Analog and LCD tachometers and even multi-function LCD gauges. All manufactured to Tohatsu's precision standards. See your dealer for a complete list of all Tohatsu gauges available for your outboard. |
|
"New instrument for monitoring all im-portant navigation data. Provides an ex-tensive range of data making navigation easier and safer. A simple menu allows you to see data presented in a varity of ways. Easily customized to suit for boat your re-quirements, e.g. analogue or digital dis-play, 8 different languages or different types of units.
The multi display gives you all the infor-mation you need about boat, wind or speed over ground, water temperature, wind speed, battery status, compass, position, bearing. In analogue or digital mode.
Just press a button to retrieve the data you want to see. Sub-menus will guide you to the information of your choice and the variety of ways to display the information.
You decide how you want your information presented.You can combine the information accor-ding to your own choice in boat blocks of 2 or 4 items of data on the same boat screen."
|
|
Multifunctional wristwatch, marine weather station with forecast symbols, temperature, boat compass, time, date and stopwatch function; with backgrund light.
Display Ø 35 mm, 50 x 50 x 17 mm, weight 55 g. |
|
This Fasnet Tide Watch for boats is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future. . Waterresistant 50 m. Warranty: 1 year. |
|
This Fasnet Tide Watch for boats is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future.
Avalaible with a black rubber strap and/or a 316L stainless steel bracelet.
Waterresistant 50 m.
Warranty: 1 year. |
|
This Fasnet Tide Watch for boats is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future. . Waterresistant 50 m. Warranty: 1 year. |
|
This Fasnet Tide Watch for boat is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future. . Waterresistant 50 m. Warranty: 1 year. |
|
This Fasnet Tide Sailboat watch is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future. . Waterresistant 50 m. Warranty: 1 year. |
|
This Fasnet Tide Watch for boat is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future.
Avalaible with a black or blue rubber strap and/or a 316L stainless steel bracelet.
Waterresistant 50 m.
Warranty: 1 year. |
|
This Fasnet Tide Watch for boat is fit out with the ISA 8272 last born movement. This movement allows you to know the instantaneous tide level in its daily cycle, and the situation of the tide range thanks to a moonphases display.
Easy to read, thanks to a long central hand (instead of digital or small counter hand).
From the large luminescent applied index, combined with a white or blue modern dial and a “wave” pattern, results a watch which, fit out with an unscratchable sapphire crystal will allow you to read time today as well as to-morrow , everywhere for a long future. . Waterresistant 50 m. Warranty: 1 year. |
|
|
|
Indicators, Repeaters
