|
|
GECDIS is a powerful navigational aid system with a geographic information system, ECDIS certified, working on standard computers fitted with Windows® NT, Windows® 2000 or Windows® XP.
GECDIS contributes to safe navigation and allows to carry out route planning and route monitoring in a simple and reliable way.
|
|
|
AmbientNAV is easy to pre-set and simply excellent underway. Anti-fog CDI monitors give me super-sharp displays in any light…with single dial dimming…a universal interface for connecting other electronics…plus in-dash programming from my remotely stowed computer. Now my glass bridge looks as clean and contemporary as it functions. Believe me, AmbientNAV is a real upgrade over a hodgepodge of non-integrated devices costing twice as much.
|
|
The Actisense NMEA Autoswitch (NSW-1) from Active Research, allows the data from up to four NMEA (National Marine Electronics Association) input devices to be switched to a single NMEA output, by determining the highest priority device with good data.
Replace your mechanical changeover switch with the NSW-1 automatic changeover system from Actisense. The intelligent Autoswitch (NSW-1) will guarantee that the best input device is always selected to supply the NMEA data output, automatically choosing the next highest if the current highest priority input device should fail for any reason.
|
|
|
|
|
|
|
The Actisense NMEA 2000 Gateway is an easy way to link between your boat's data networks. The NGW-1 makes it possible to convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
The NGW-1 allows you to keep your current NMEA 0183 equipment, or to incorporate the latest NMEA 2000 equipment into your curent NMEA 0183 system. It also allows a single cable NMEA 2000 bus system to be installed, allowing data from any node on the bus to talk to any other, including those NMEA 0183 instruments connected using our gateway. In this mode, the NMEA 2000 network acts like a bi-directional multiplexer, allowing all data sources to talk to each other.
The very latest Actisense ISO-Drive technology has been used in the NGW-1 to separate the output from ground. Electrical spike protection is provided as standard on the NGW-1's input using full galvanic Opto-isolation to provide superior protection to the NMEA source device. Thus full isolation is maintained between the NMEA 0183 input and output and the NMEA 2000 CAN bus.
Simple to use, the NGW-1 is provided with all required cabling, and also incorporates screw terminal connectors within the case to allow customer specific wiring to be done.
|
|
|
|
|
|
|
The Actisense™ USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
Total galvanic isolation is assured using an ISO-Drive output and the use of the trusted Actisense OPTO isolated input circuitry.
The ISO-Drive output offers total galvanic isolation from the input and can "float" safely up to 1500 VDC from ground. Its sophisticated circuitry is 100% compatible with the NMEA 0183 RS422, industrial RS485 and single-ended PC RS232 "COM" ports.
The USG-1 provides comprehensive isolation of the expensive PC hardware when connecting to an NMEA 0183 (RS422) bus that may have picked up potentially hazardous voltages around the electrically noisy environment of a vessel or factory, and makes installation simple due to the isolation of the PC ground from the NMEA 0183 data network ground, often the biggest cause of data errors and one of the biggest safety hazards in any electronic installation.
|
|
|
|
|
|
|
The Actisense%u2122 NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs to be multiplexed / combined in to one NMEA output.
This approach offers these major advantages:
- Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
- Each NMEA input device is Opto-isolated from all other NMEA device in the system
- Any NMEA data not required can be easily filtered out to reduce the total amount of NMEA data in the system
- Each input and output Baud rate can be changed to match the requirements of connected devices
Electrical spike protection is provided as standard on all four input channels using opto-isolators. This protects any connected equipment from most system faults; a particularly valuable benefit as equipment requiring the most data, such as a PC or chart plotter, is often the most expensive to repair or replace.
The NDC-2 Data Multiplexer contains highly intelligent software that manages the multiplexing and filtering operation, allowing every input to have a chance of its data reaching the combined NMEA output. Tested up to and beyond a combined 300% loading of the four inputs.
|
|
This Actisense NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines them to its two NMEA outputs.
This approach offers these major advantages:
- Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
- Each NMEA input device is Opto-isolated from all other NMEA device in the system
- Significant reductions in installation cost (from reduced cable lengths and requiring only one NMEA cable to be routed around the bridge to supply the multiplexed NMEA data
The NDC-4 has two ISO-Drive outputs which are fully compatible with both NMEA 0183 and PC RS232 ports.
The NDC-4-USB has an additional USB bi-directional port which allows a copy of the data on the second ISO-Drive output to be sent to a virtual serial port on a PC, while receiving data from the PC through the same virtual port. This option disables the opto input reserved for the PC connection.
|
|
This version of the NDC is no longer in production, please view the NDC-4 product if you require a new Multiplexer.
The Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs to be multiplexed / combined in to one NMEA output.
This approach offers these major advantages:
Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
Each NMEA input device is Opto-isolated from all other NMEA device in the system
Significant reductions in installation cost (from reduced cable lengths and requiring only one NMEA cable to be routed around the bridge to supply the multiplexed NMEA data
|
|
Practical solution offering pinpoint accuracy...
Nauticomp IP67 Mouse is a proven ergonomic on deck solution. Supplied with both PS/2 and USB interface.
Key Points:-
IP67 Front & Back
Serial & USB Connections supplied
|
|
|
Hatteland Display is the first port of call for system integrators requiring marine displays from small sizes up to large widescreens, computers and panel computers. Our ability to customise our products increases our flexibility even further and ensures our customer's get equipment to their exact specification, whatever that may be.
|
|
|
Hatteland Display is the first port of call for system integrators requiring marine displays from small sizes up to large widescreens, computers and panel computers. Our ability to customise our products increases our flexibility even further and ensures our customer's get equipment to their exact specification, whatever that may be.
|
|
The next generation of Marine Computers.
With the VEI MARCI you can run your radar, sounder, chart plotter, security, entertainment, communications, system monitoring and more! The MARCI computers are completely marinized and have no equal in the marine electronics industry. Manufactured in the USA, there is no better way to bring your marine operations and computer together. That must be why the US NAVY, ARMY and COAST GUARD choose VEI as well as countless private yachts. Shock and corrosion resistant and compact.
|
|
|
|
|
|
|
Robust and reliable
Locomarine rack computers are made from specially developed industrial motherboard prepared for operating in harsh marine environment. Protected with patented Locomarine NZBN™ protection, these computers will withstand high humidity and salinity environment. Quality assurance testing throughout the components ensure all Locomarine rack computers are able to provide stable performance in the most demanding environment.
High performance
Using latest PICMG 1.3 backplate solution, Locomarine marine rack computers can take the best from latest high-performance processors and chipsets. Multiple PCIe links to backplate can operate x1, 4x, 8x or 16x depending on the capabilities of both the SHB and the backplane.
Compatibility
New PICMG 1.3 solution fully supports existing system software and device drivers. PICMG 1.3 has high data transmission speed and wide data brandwidth.
2U-1, Single CPU Card System / 6-slot Full-Size Rackmount Chassis
Construction: Heavy duty metal
SBC form factor: Full-size, slot CPU card
Drive bays: 1x 5.25", 1x front accesible 3.5", 1x 3.5" HDD
Cooling fans: 2x 8 cm
Replaceable fan filters: yes
I/O ports: 2x USB
Expansion slots: 6
PCI: 1
PCIe x1: 2
PCIe x16: 1
Power supply: 300W 110/220 VAC (standard), 9-36 VDC (option), 110/220 VDC redundant (option)
Indicators: Power, HDD
Buttons: 1x power switch, 1x reset
Operating shock: 10G acceleration peak to peak (11ms)
Operating environment: 0 - 50 °C
Operating humidity: 10 - 95%
Weight (N/B): 8.2 kg / 12.4 kg
Dimension (DxWxH): 487.5 x 431 x 88 mm
Warranty: two years
|
|
|
|
|
|
|
Robust, small and reliable
Locomarine™ mini marine computers are based on specially developed industrial motherboard prepared for operating in harsh environment. Protected with patented Locomarine™ NZBN® protection, Locomarine™ computers will withstand high humidity and salinity environment and specially developed shock and vibration absorbers will protect hard disks from failure. Locomarine™ mini marine computers are equipped with Secure Cable Management® system against accidental cable disconnections. With size of only 220x220x90 mm, Locomarine™ mini computers are probably the smallest and most powerful marine computers on the market today.
Series 4500 - HIGH PREFORMANCE, LOW POWER CONSUMPTION, DUAL DISPLAY SOLUTION
Processor (*): Intel® Core™2 Duo, Core™Duo, Core™Solo
CPU Socket: 479 (Mobile)
FSB: 667 MHz
Memory (*): 2 x 240-pin dual channel DDRII 400 / 533 / 667 MHz up to 4 GB
Chipset: Intel® 945GM + ICH7M
Drive bays: 2x 2.5" HDD (SATA/IDE)
Ethernet: Dual Broadcom BCM5787M PCIe GbE controller
I/O ports: 1 VGA + 1 DVI, 8 USB, 2 RJ-45 LAN, 1 PS2 mouse/keyboard, 4 COM (3xRS232, 1xRS232/422/485), 2 Audio (line in/out)
Super I/O: ITE8712
Digital I/O: 8-bit digital I/O, 4-bit input/4-bit output
Video: VGA Integrated in Intel® 945GM
Audio: Realtek ALC655 with AC'97 codec
WLAN: Air live WN-5000 PCI 802.11b/g/n + 2,4 GB 5dBi dipole antenna
Watchdog timer: Software programmable supports 1-255 sec. System reset
Power supply: integrated 6-24 V (automatic off, remote on/off switch)
Operating shock: 10G acceleration peak to peak (11ms)
Operating environment: 0 - 50 °C
Operating humidity: 10 - 95%
Dimension: 220x225x90 mm
Warranty: two years (limited)
|
|
|
|
|
|
|
Robust, small and reliable
Locomarine™ mini marine computers are based on specially developed industrial motherboard prepared for operating in harsh environment. Protected with patented Locomarine™ NZBN® protection, Locomarine™ computers will withstand high humidity and salinity environment and specially developed shock and vibration absorbers will protect hard disks from failure. Locomarine™ mini marine computers are equipped with Secure Cable Management® system against accidental cable disconnections. With size of only 220x220x90 mm, Locomarine™ mini computers are probably the smallest and most powerful marine computers on the market today.
Series 1000v2 - ULTRA LOW POWER CONSUMPTION, LOW PRICE
Processor (embedded): Intel® Atom 330
Memory (*): 1 x 240-pin DDRII 533/667 MHz up to 2 GB
Chipset: Intel 945GC + ICH7
Drive bays: 2x 2.5" HDD (SATA/IDE)
Ethernet: GbE controller
I/O ports: 1 VGA, 1 S-video, 8 USB, 1 RJ-45 LAN, 1 LPT, 1 COM (RS232), 1 Audio (in/out),
1 PS2 mouse/keyboard, 3 Audio (line in/out/mic)
Video: Intel® Graphics Media Accelerator 950 & S-video output support
Audio: Realtek ALC662 (5.1 channel Surround)
Watchdog timer: Software programmable supports 1-255 sec. System reset
Power supply: integrated 6-24 V (automatic off, remote on/off switch)
Operating shock: 10G acceleration peak to peak (11ms)
Operating environment: 0 - 50 °C
Operating humidity: 10 - 95%
Dimension: 220x225x90 mm
Warranty: two years (limited)
|
|
|
|
|
|
|
Robust, small and reliable
Locomarine™ mini marine computers are based on specially developed industrial motherboard prepared for operating in harsh environment. Protected with patented Locomarine™ NZBN® protection, Locomarine™ computers will withstand high humidity and salinity environment and specially developed shock and vibration absorbers will protect hard disks from failure. Locomarine™ mini marine computers are equipped with Secure Cable Management® system against accidental cable disconnections. With size of only 220x220x90 mm, Locomarine™ mini computers are probably the smallest and most powerful marine computers on the market today.
Series 6500v2 - ULTIMATE MULTIMEDIA MARINE MINI COMPUTER
Processor (*): Intel® Core™2 Extreme, Core™2 Quad, Core™2 Duo
CPU Socket: LGA 775
FSB: 533/800/1066/1333 MHz FSB
Memory (*): 2 x 240-pin dual channel DDRII 667 / 800 MHz up to 4 GB
Chipset: Intel G45 with Intel® Graphics Media Accelerator X4500HD (Intel® GMA X4500HD)
Drive bays: 1x 2.5" HDD (SATA/IDE)
Ethernet: Single Intel® 82567LF GbE controller
I/O ports: 1 DVI, 1 HDMI, 10 USB, 1 RJ-45 LAN, 1 PS2 mouse/keyboard, 1 COM (1xRS232), 1 eSATA, 1 OD line out,
2x3 Audio (double streem, line in/out/mic)
Video: VGA Integrated in Intel® GMA X4500HD
Audio: 7.1 HD audio IDT 92HD73ET
Watchdog timer: Software programmable supports 1-255 sec. System reset
Power supply: integrated 6-30 V (automatic off, remote on/off switch)
Operating shock: 10G acceleration peak to peak (11ms)
Operating environment: 0 - 55 °C
Operating humidity: 10 - 95%
Dimension: 220x225x90 mm
Warranty: two years (limited)
|
|
|
|
|
|
|
Robust and reliable
Locomarine rack computers are made from specially developed industrial motherboard prepared for operating in harsh marine environment. Protected with patented Locomarine NZBN™ protection, these computers will withstand high humidity and salinity environment. Quality assurance testing throughout the components ensure all Locomarine rack computers are able to provide stable performance in the most demanding environment.
High performance
Using latest PICMG 1.3 backplate solution, Locomarine marine rack computers can take the best from latest high-performance processors and chipsets. Multiple PCIe links to backplate can operate x1, 4x, 8x or 16x depending on the capabilities of both the SHB and the backplane.
Compatibility
New PICMG 1.3 solution fully supports existing system software and device drivers. PICMG 1.3 has high data transmission speed and wide data brandwidth.
Construction: Heavy duty metal
SBC form factor: Full-size, slot CPU card
Drive bays solutions:
1x 2.5" HDD for each system (4 in total)
Cooling fans: 1x 8 cm for each system (4 in total)
I/O ports: 2x USB (front panel) for each system (4 in total)
Expansion slots for each system: 1 x PCIe x1, 1 x PCIe x16, 1 x PCI
Power supply: 180W 110/220 VAC (standard) for each system (4 in total), 9-36 VDC (option), 110/220 VDC redundant (option)
Indicators: Power, HDD (for each system)
Buttons: 1x power switch + 1x reset (for each system)
Operating shock: 10G acceleration peak to peak (11ms)
Operating environment: 0 - 50 °C
Operating humidity: 10 - 95%
Weight (N/B): 12.5 kg / 16.5 kg
Dimension (DxWxH): 460 x 431 x 176 mm
Warranty: two years
|
|
|
|
|
|
|
Robust and reliable
Locomarine rack computers are made from specially developed industrial motherboard prepared for operating in harsh marine environment. Protected with patented Locomarine NZBN™ protection, these computers will withstand high humidity and salinity environment. Quality assurance testing throughout the components ensure all Locomarine rack computers are able to provide stable performance in the most demanding environment.
High performance
Using latest PICMG 1.3 backplate solution, Locomarine marine rack computers can take the best from latest high-performance processors and chipsets. Multiple PCIe links to backplate can operate x1, 4x, 8x or 16x depending on the capabilities of both the SHB and the backplane.
Compatibility
New PICMG 1.3 solution fully supports existing system software and device drivers. PICMG 1.3 has high data transmission speed and wide data brandwidth.
4U-1, Single CPU Card System / 14-slot Full-Size Rackmount Chassis
Construction: Heavy duty metal
SBC form factor: Full-size, slot CPU card
Drive bays solutions:
3x 5.25" + 1x 3.5" HDD
2x 5.25" + 2x 3.5" HDD
2x 5.25" + 2x front accessible 3.5"
2x 5.25" + 1x 3.5" HDD + 1x front accessible 3.5"
Cooling fans: 2x 8 cm
Replaceable fan filters: yes
I/O ports: 2x USB, 1x PS/2
Expansion slots: 14
PCI: 8
PCIe x1: 3
PCIe x16: 1
Power supply: 300W 110/220 VAC (standard), 9-36 VDC (option), 110/220 VDC redundant (option)
Indicators: Power, HDD
Buttons: 1x power switch, 2x reset
Operating shock: 10G acceleration peak to peak (11ms)
Operating environment: 0 - 50 °C
Operating humidity: 10 - 95%
Weight (N/B): 10.4 kg / 15 kg
Dimension (DxWxH): 413 x 431 x 176 mm
Warranty: two years
|
|
Mega-Yacht Package
- Micro Captain Pro PC w/ DVD ROM
- Two Station 15" NEMA4 Daylight Displays
- 15" NEMA4X High Brightness Sunlight Display
- Includes 6 ft., 25 ft. and 50 ft. Display Cables
- 4:1 Display Video Splitter / Amplifier
- Standard Mouse and Keyboard
- Full Windows Based Operating System
|
|
|
|
|
|
|
What is so special about Elite PCs:-
• 'GREEN' High Peformance - Compact Small Form Factor
• 4 Serial Ports - RS232/422/485 Setup via Software
• Isolation - Anti-vibration / Shock Mounts
• RAID - Integrated RAID1 Controller 'Mirrors' Data
• IMO Certification - ABS, BV, CCS, DNV, GL, LR & RINA
...Captains and System Integrators will find Aadaptiv's Elite PCs the solution to their professional integration needs. Maritime Certification for recreational and commercial vessels has been achieved utilizing the latest technology in a PC platform without sacrificing performance or operational functionality and makes the most of your investment.
Aadaptiv's design is based on a energy efficient solution that helps lower electrical consumption and operating cost by utilizing improved power saving technology such as 85% efficient power supplies and power management software. To aid installation and commissioning the Elite Computer has 4 Serial Ports which are software configurable for RS232/422/485. Low Frequency Anti-vibration / Shock Mount System is standard on the Elite IMO Computer and optional on the Elite Computer.
For demanding applications AAdaptiv's Elite Computer has a RAID1 Controller is incorporated with Dual Video Outputs to support multiple applications typically found in most Bridge environments.
AAdaptiv's Elite IMO Computers are Type-Approved meet IACS Unified Requirement E10 and the relevant sections of IEC 60945 when installed in conjunction with the Low Frequency Anti-vibration / Shock Mounting Kit.
A Elite PC by AAdaptiv Technologies. It's a command decision for the digital world...
|
|
|
The EPC-box Nautic provides your basis for a separated computer solution and can be utilized in conjunction with the MT Nautic Monitor series. The EPC-box Nautic features a modular system for individual applications, separate box installation for added safety and is connectable to a range of 15 to 23 inch monitors.
|
|
|
Hatteland Display is the first port of call for system integrators requiring marine displays from small sizes up to large widescreens, computers and panel computers. Our ability to customise our products increases our flexibility even further and ensures our customer's get equipment to their exact specification, whatever that may be.
|
|
The same technology used into the biggest and modern cruise boat is today available for your yacht.
Only one monitor touch screen can control and monitoring all commands, with customized graphical display, with an attractive design for a very fussy shipowner.
SAILING MANAGER is the integratedto system control and monitoring the electrical plant and all the other plants on board, it has been designed for any yacht.
SAILING MANAGER can integrate the on board lights comfort. So you will be able to manage your favoutite lights scenary or your cinema or your on board music library from the same touch screen or simply from a Pocket PC.
|
|
|
|
|
|
|
The PEGASO is a system fines-rooms developed from DigiMark, that it allows the customers to see film, photo or to listen to music, independently from one another wishes anytime it.
The PEGASO is composed from a server (AM5000) and an indefinite number of client (MD100).
Server AM5000 has an ability to memory of formed expandible base from 2 HDD from 1 Tb connected in mirror, inside of which they can be stored in quality DVD (1024x768 pixels) besides 500 films, CD and photos that will be you flavored yourself with tuttii client.
AM5000 comes connected through bed base LAN (10/100 Ethernet) to all the client present but it is possible to catch up them also through Wi-Fi logon.
Client the MD100 besides to reproduce film, photo and to listen to contained musical pieces in the server, comes supplied with integrated reader DVD/CD, income USB for CF, camera... and integrated amplifier 5+1 200Watt that it allows to have a wide wealth of sounds and effects.
MD100 through visualized a graphical gradevole and intuitiva interface on the display of the TV and through a remote control supplied in equipment, will guide the customers uses in it of the functions: they will be able to choose to they piacimento what wish to see, at the same time or in independent way from one another, visionando or listening to various parts of the same film or musical piece.
With own NoteBook and a dedicated software the customers will have the possibility to see film, photo or to listen to music being connected to the server in Wi-Fi modality
|
|
The Actisense NMEA Buffer module is the best solution for buffering weak NMEA sources, allowing NMEA devices to be driven, such as chart plotters, radars, and/or an on-board PC / Laptop.
The very latest Actisense ISO-Drive technology has been added to the NBF-2 so that now each output is separately isolated from each other and from the power supply, making this a world first at this price point and the safest buffer on the market.
The NBF-2 Buffer is required wherever an NMEA source cannot provide sufficient power to drive all the equipment that requires the NMEA data it supplies. It is also ideal for safely interfacing an on board PC to all the NMEA equipment on board a vessel, while providing total Opto-isolation between every device.
Due to the ISO-Drive output, the buffer may also be used where a ground loop problem needs solving, and means that it is not necessary to use supply isolators to achieve isolation between two data sources.
|
|
The appealingly designed black, powder-coated aluminum frame and casing provides protection and affords a timeless look. The front enclosure is IP66 classified, which means that it is waterproof even when exposed to high pressure washing. The operator panel is configured with the user-friendly Information Designer software tool.
With 1024 x 768 pixels, this high-resolution 15.0" TFT-display ensures optimal viewing in all conditions and large viewing angles and features a sun-readable display.
|
|
The appealingly designed black, powder-coated aluminum frame and casing provides protection and affords a timeless look. The front enclosure is IP66 classified, which means that it is waterproof even when exposed to high pressure washing. The operator panel is configured with the user-friendly Information Designer software tool.
With 640 x 480 pixels, this high-resolution 6.5" TFT-display ensures optimal viewing in all conditions and large viewing angles and features a sun-readable display.
|
|
|
The little one but powerful display from 5%u201D of series AMX Modero is elegance and technology concentrating. Light, compact, with a display LDC to colors in high resolution, function touch, sensor light and movement, speaker integrated, to its inside he lodges also a powerful graphical processore in order to develop interface software works them and simple to use.
|
|
The displays 17%u201D are units purposely produced for the nautical market. The solidity of the structure, the visibility in any condition of brightness, also in directed solar light, the regulation for the nocturnal use and the possibility to install the display are inside that outside they are only some of the characteristics of these displays of quality.
The clarity of the images puts in evidence the quality of interfaces AMX PROTEO, that they can be controlled through touchpad or trackball, or choosing the option touch screen (adviced against in outside). The display is planned in order to operate in any condition of navigation and is tested against shock and vibrations. The availability of incomes is wide, thus as the possibility to use the display for the supervision software, for navigation (plotter, radar, depth sounder, etc) or as interface multifunction.
|
|
|
|
Computer hardware for boats
