|
|
Raider Antenna for Rigid Inflatable Boats
Designed specifically for R.I.B.s (Rigid Inflatable Boats), this antenna has a short helical design to avoid snagging and excessive whip action.
Black stainless steel
Solderless connector system
Integral black bracket with mounting holes
8m RG-58 cable
PL-259 plug
One section.
Blister packed
|
|
Powered Hinge System
Fully powered hinging system for Scanstrut Dual PowerTower and Satcom PowerTower.
- Reduces height for passing under brdges and for winter storage
- Remote operation
- Low profile mounting
- Fully watertight installation to IP67
- Cables run internally via watertight seal
- Easy to retro-fit to an existing installation
|
|
Specially designed for the Orbcom paging system's requirements, this compact workhorse is perfect for any vessel where small size is important. Stainless steel whip. The chrome plated brass canister minimizes de-tuning.
Optimized for the Orbcom 137-150 MHz band
Sealed, tin-plated copper wire coil
Stainless steel whip (36")
Requires mount with center hole for passage of the supplied 15' RG-58 cable.
One section
PL-259 connector included
|
|
Active Antenna
This active antenna is designed for receive-only purposes. It is lightweight, rugged, and can be used to feed up to five receivers. When the d.c. voltage for the active antenna is not provided by the receiver, it may be supplied by either our AAX1 or AAX5 Power Supply/ Splitter Box. The AAX5 is recommended when the antenna is required to supply more than one receiver. The receivers can be a combination of navigation types, SSB, broadcast AM/FM and Fax.
Tapered stainless steel whip
Lightweight, wideband, active receive-only
20m RG-58 cable and black aluminium bracket plus BNC connector
Use with AAX1 or AAX5 Power Supply/Splitter Box
|
|
Designed to meet the broader band width requirements of AIS transceivers. Its compact size will be welcome aboard any vessel. Chrome plated canister minimizes the de-tuning associated with antennas with plastic canisters.
* Built for AIS transceivers
* Sealed tin plated copper wire coil
* Stainless steel 36" whip
* Requires mount with center hole for passage of 15ft RG 58 cable
* Supplied with 15ft RG 58 cable attached
* PL-259 connector included
* One section
|
|
Sailboat owners will love this version of the longtime favorite Style 5215. It is light weight, low profile, stainless steel antenna, designed for masthead mounting and built with extra bandwidth for all popular AIS transceivers
* Designed specifically for AIS transceivers
* Sealed, tin-plated copper wire coil
* Stainless steel body and 36" whip
* SO-239 connector
* Stainless steel "L" Bracket included
* One section
Best applications include: Systems requiring AIS antennas
|
|
2.9m, Collinear Phased, 5/8 Wave, Two Section, VHF Antenna with Two Coaxial Chokes
This professional quality antenna combines strength and performance for use where you really need the efficiency of a large antenna, but don't have room for one.
Brass and copper elements
Chrome-plated brass ferrule with standard 1in-14 thread
Includes 15ft RG-58 cable and a PL-259 connector
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
Sleek and classy, the designer look of this four-way ratchet mount won't fail to catch your eye. Its simple lines come from a nutless design. This streamlined beauty has standard 1"-14 threads and a special cable slot that eliminates removal of most factory installed connectors. Easy on the eye, and super easy to use.
* Stainless steel construction
* Standard 1in-14 thread (male)
* Slot for cable feed-through
* Bolt holes: 5/16" dia,, 3" x 1½" on center
|
|
Stainless Steel Ratchet Mount
Four-way ratchet design for deck or side mounting.
Quick release lever allows antenna fold-down
Sturdy construction, quality finish
Suitable for all powerboat antennas
Standard 1" x 14 TPI thread
Hardware: sold separately
Feedhole: Special Cable Slot
|
|
Heliflex Stub Antenna
This popular V-Tronix masthead antenna is perfect for race boats or for sailors who want an antenna with the lowest possible windage. The Heliflex performed very well in an independent test conducted by "Sailing Today" - and their conclusion was: "...It actually performed very well and almost managed to hold its own against the other whip antennas". This antenna is frequently specified for original equipment by leading sail boat makers and it is presented in an attractive blister pack.
Low windage antenna for race yachts
Ultra lightweight
Helical construction
Unobtrusive
Integral aluminium masthead fitting plus 20m of RG58 cable
PL-259 plug
Does not require ground plane
Blister packed
|
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit all new generation radomes.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks.
|
|
Custom Designs
Scanstrut is a recognised and respected supplier to several of the world’s best sail and power boat builders.
From a one-off mounting to a custom product range for a new boat model, Scanstrut will provide a complete design and build service for bespoke solutions.
Our experienced designers listen to your needs and develop the right solution to meet your exact installation requirements.
Scanstrut OEM projects have successfully:
- Reduced time & build costs
- Simplified stock holding
- Introduced technically superior products
To view a list of our current OEM products, please visit our website.
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
Stowaway Emergency Antenna
Emergency VHF Antenna for instant set up if your main antenna becomes broken or disabled.
Packed in a plastic tube
Easily stowed away
Fitted with rubber suction cap for quick mounting on any smooth, horizontal surface.
3.7m of cable with PL-259 connector
Velcro strips for storage are included
|
|
1.5m, Cellular Antenna Dual Band with Polycarbonate Ferrule
This Cellular Antenna covers Pan European GSM 900 and 1800MHz networks. Unlike car antennas, it does not need huge amounts of metal to act as a ground plane and therefore can be mounted in any convenient location. It matches the RV 120P and the MD 24.
White tapered fibreglass tube
White polycarbonate ferrule
Matches RV 120-P and MD24
1in x 14 TPI thread
7.6m LoMax® cable
TNC connector
Recommended Ratchet Mount is ARMNT-P
|
|
Omni directional and directive ground TV antenna, totally watertight. Thanks to the control box supplied with the antenna, the signal can be sent from 4 to 10 TVs.
Height: 40 cm
Diameter: 25 cm
Weight: 2 kg
Cable: 20 Mt
Power supply: 12V
Bandwidth: 170 to 230 MHz / 470 to 860 MHz
Output impedance: 75 Ohm on cable
Gain: 30 Decibel
Working voltage: 12V
UHF: H/V polarization
VHF: H polarization
Warranty: 2 years
|
|
Reba di Garbarino is proud to present the latest brand new antenna.
Issued from years of experience in design and technological innovation, the new Kima proposes itself as the new leader on the market thanks to its features.
Its innovative Design, the simple and easy installation and its new optimized performances, together with Made in Italy TM synonym of reliability and quality, makes this item the best choice for an integrated solution for TV (Digital Terrestrial), VHF, AIS and GPS problems, without compromising its performances and innovative look.
Available from January 2009.
We are looking for distributors / dealers for free Zones.
|
|
SeaWatch® Style 2020-G Off-air TV antenna
The ideal smaller marine TV antenna where styling and size are controlling factors. Perfect for close-in, or stronger signal areas. System includes antenna with built-in preamp, AC/DC power supply, 30ft of ultra low loss RG-59 coax cable, and gold-plated, screw-on F-type connectors. Built-in 1in-14 thread ferrule.
* Omnidirectional antennas capture VHF, UHF, and FM point of the compass without aiming the antenna.
* 14-inch diameter
* Sleek and attractive
* 110vAC or 12/24 DC power
* Digital HDTV-ready
Best applications include: boats or RV's.
|
|
When you require a compact antenna, or want that sleek low profile look without the bulky weight of a large antenna,
then the VEGA TV antenna mod. V9114 is the perfect solution. Made from ASA, it can withstand the harsh marine environment,
and with a totally screened, low noise amplifier built in the antenna case, it ensures you receive the best reception possible for VHF and UHF frequencies in both analogue and digital domains.
To balance the appearance on your boat you can match it with the RA121 Low Profile VHF antenna.
|
|
TV 27,5DB POWER BOAT/MASTHEAD 0.37M (1,3') NYLON F CONNECTOR GOLD PLATED AMPLIFIER 50023/98
The Glomex foundation, conceived 25 years ago, the most spreaded worldwide marine TV antenna and still the market best seller. The V9112/00 is suitable for applications on any type of boat, sailing or powerboat. Its design with its elevated performance and good quality materials of construction, make of it a guarantee for a perfect visions on all the television channels.
The V9112/00 is available with different power supply/amplifier that gives the possibility to control the gain, increasing it when the signal is weak or attenuate it when the signal is strong.
The amplifier can be minstalled in different ways, surface or flush mount. Its available in three different versions.
They also allow receiving radio programs using the due accessories.
|
|
TV 26DB POWER BOAT/MASTHEAD 0.25M (0,85) NYLON F CONNECTOR GOLD PLATED AMPLIFIER 50023/98EC
V9125/00: the smallest dish shaped Glomex omnidirectional TV antenna. Ultra compact, extra lightweight with greatest
omnidirectional performance; the characteristics that V9125/00 offers to you. Made in ASA, with no active components
which provide extra protection from atmospheric elements. It receives VHF and UHF frequency at 12/24 V DC power totally
screened. It receive also the radio frequency, using the V9147 splitter.
|
|
This compact Glomex ALTAIR TV antenna provides optimum omni-directional performance with both horizontal and vertical polarised signals, thanks to the extended height of the radome which allows for the inclusion of a vertical element inside.
Made from ASA to withstand the harsh marine environment, the V9126 can receive both VHF and VHF TV frequencies in both analogue and digital domains. It is supplied with a totally screened amplifier 12/24 volt d.c. equipped with a signal by pass and gain control to ensure the best possible reception of digital terrestrial signals. To balance the appearance on your boat you can match it with the RA124 VHF antenna.
|
|
|
MINI-antenna (diameter: 31 cm only) specially designed to receive UHF channels. However, a special circuit configuration and a high-gain amplifier make it possible to receive VHF B3 programs, too.
|
|
This DUAL POWER antenna is the result of the combination of two antennas: excellent performance is guaranteed also for the lowest-frequency programs (VHF -
B3). Extremely weak signals can be received thanks to a low-noise amplifier.
|
|
|
A combination of electronic amplifier high sensitivity and special antenna design enable you to receive TV programs at the lowest frequencies, too, while maintaining outside dimensions within 38 cm.
|
|
The Coastal 18 is small in size, but big on features with Sea Tel's superior quality and performance in satellite television at sea. It has a compact 18" dish that is perfect for small yachts, with a wide coverage range while maintaining a compact size. The Coastal 18 features a 2-axis stabilization system with enhanced reception that rivals most 24" systems. A small, lightweight antenna with a classic, clean design and built-in GPS for fast satellite acquisition.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
|
|
Boat antennas, mounts
