|
|
| Products 91 to 120 of 146 |
|
New SI-TEX e-LORAN Integrated GPS/Loran receiver sensor gives you extraordinary repeatability. It gives you the best of both worlds…GPS WAAS accuracy and True-Loran positioning, no conversions. It is perfect for finding that old Loran-C Fishing Hot Spot.
|
|
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.
Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.
NEW mounting foot design for 2008 - even easier installation.
Features
- Easy and quick to install with all fastenings supplied
- Attached to mast by four swivel feet matching the profile of any mast
- 12 point fixing using highest quality Monel rivets for a secure installation
- Nylon washers for all fastenings to protect paint finish
- Waterproof cable grommet included to seal cable entry into mast
|
|
|
|
|
|
|
NEW Scanpod - Helm Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Helm Pods
Install chartplotter, radar displays, instrument and autopilot controls onto your sailboat.
- Models to fit 8”, 10”, 12” and 15” displays
- Two case depths, shallow & deep - compact mounting of displays
- Universal fit to 9.5” and 12” centre pedestal guards – easy product selection
- Option to install additional instruments at the helm
See 'Flex-Mount System' accessory for installations on twin helms and low rails.
|
|
Scanpod - Deck Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Deck Pods
A range of universal pods to install displays onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.
- Swivel / tilt base – provides level mount on any angled slopes and locks / unlocks into position
- Models to fit 8”, 10” and 12” displays
|
|
Scanpod - Mast Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Mast Pods
Install standard or larger 20/20 maxi style instruments at the mast for a clear view.
- Universal mount system fits a wide range of mast sizes
- Models to mount 2, 3 or 4 standard nav instruments
- Additional Carbon Mast Pod available to fit 3 x 20/20 maxi style instruments
|
|
Reba di Garbarino is proud to present the latest brand new antenna.
Issued from years of experience in design and technological innovation, the new Kima proposes itself as the new leader on the market thanks to its features.
Its innovative Design, the simple and easy installation and its new optimized performances, together with Made in Italy TM synonym of reliability and quality, makes this item the best choice for an integrated solution for TV (Digital Terrestrial), VHF, AIS and GPS problems, without compromising its performances and innovative look.
We are looking for distributors / dealers for free Zones.
|
|
Shakespeare’s legendary Style 5225-XT VHF antenna maximizes range and quality in a great looking antenna. The 8' 6dB gain 5225-XT is Shakespeare’s classic Style 5225 in a stronger, stiffer radome. It’s extra tough for use on hard tops, T-tops, radar arches, or wherever its extra resistance to high winds and high speeds is welcome.
* Brass and copper elements for maximum range and efficiency
* Stainless steel ferrule with standard 1-inch-14 thread
* 20ft RG-8/X low-loss cable plus a PL-259 connector
* Suggested mount: Shakespeare Style 4187 (sold separately)
* One section
Twin to: Shakespeare Style 5223-XT
Best applications include: T-tops and hard-tops, etc.
|
|
This compact, lightweight antenna is ideal for vessels where space is limited. Its chrome plated brass canister minimizes the de-tuning associated with plastic canisters on other antennas.
* Stainless steel 36" whip
* Sealed tin plated copper wire coil
* Requires mount with center hole for passage of the 15ft RG 58 cable
attached to the antenna
* Cable and PL-259 connector supplied
* Suggest mount - 4187, 5187, 4188-S, 4188-SL or 4190 ratchet mount
* One section
|
|
Designed especially for small or inflatable boat applications needing only short range communication. The 5912 is a small, space-saving antenna that attaches and detaches with ease, once the included flush mout kit has been installed.
The connectors are gold plated for low-loss performance.
* Space saving design
* Quick easy set up
* Gold plated Flush mount kit included
* 7" rubber flex antenna
|
|
For the small mid sized vessel, having a premium, quality looking product is just as important as its performance.
With choices such as plastic or polished stainless steel, integrated 2 way swivel mount, double thickness antenna mount tube, it not only can be matched to the look of your vessel, but it also can resist vibrations and shocks better than any other marine antenna. On top of that, with its glossy 5 layer UV resistant paint it will continue to look good for a long time into the future. And not letting actual performance suffer, we top it off with 4.5 mts of twin screen low loss RG58 coaxial cable feeding the internal 1/2 wave antenna element which assures the best communication possible due to the resulting extended angle of transmission on the horizontal plane.
|
|
VHF 3DB POWER BOAT 0.9M (36
There is no compromise in the manufacturing of these antennas.
The tapered stainless steel whips can absorb physical shocks without bending.
The fibreglass version has a glossy polyurethane coating to provide extra corrosion protection for the internal copper elements.
The Glomex exclusive weatherproof solderless connector allows installation without soldering so it simplifies the replacement of existing antennas.
These individually tuned antennas are supplied with all of the parts necessary for installation.
We supply only high quality RG58 C/U (MIL C17) coax cable with our ALOUD product line.
These antennas are also approved for marine use on grounded and ungrounded installations (sail and power boats) by the Netherlands Postal Service.
Powerboat 1”x 14 tpi stainless steel whip (no coax supplied).
|
|
VHF 6DB POWER BOAT 2.4M (8') FIBREGLASS 6.0M (20') COAXIAL CABLE LOW LOSS STAINLESS STEEL FERRULE PL259 GOLD PLATED CONNECTOR
The GLOMEX CLASSIC range of VHF antennas are designed to fit the needs of all powerboats.
Built to Glomex%u2019s high standards, all of these antennas have a glossy polyurethane finish, UV resistant electropolished stainless steel ferrules (RA 1225), solid brass radiating/receiving elements, and the highest quality coaxial cable.
We promise and deliver the best performance and value.
This high performance 8%u2019 collinear antenna with its superb polyurethane finish will enhance the appearance of any boat.
The collinear phased 5/8 wave elements provide long range communications while the other feature provide life long service.
|
|
Stainless Steel Whip Antenna with Integral 'N' Jack
This antenna has been designed to withstand the most rugged punishment. It is manufactured to the highest standards and quality - and all the vulnerable electrical parts are sealed in epoxy resin to resist water ingress.
Stainless steel whip
Lightweight
Low windage
180mm nylon bracket for masthead fitting
Watertight strong construction
Fitted with integral 'N' jack to allow detachable cable
0.4 kilo (with bracket)
|
|
|
|
|
|
|
Frejus, France – SEAVIEW by PYI is pleased to announce the release of the new Seaview Instrument Pods, which will be available in early 2010. These instrument pods are constructed with a high quality marine grade anodized aluminum base and UV resistant white ABS plastic housing. Full adjustment both horizontally and vertically is easily executed with the polished stainless steel quick release handle, easily accessible on the Seaview Pod display housing. This feature is not only functional & efficient but provides a clean, professional look in your helm station. The units special gasket ensures a water tight and secure installation. Seaview Pods are available pre-cut, un-cut or customizable to your specific application.
Seaview offers an electronic installation solution for any application on both Sail & Power boat, servicing both pleasure & commercial craft. Seaview offers a full range of standard and custom-mounting solutions for the growing market of radar, telecommunication & vision related marine products. As always, our primary goal is to provide our customers with quality products, innovative solutions & customer service second to none. Please contact Seaview for additional information or if you have any questions and visit our website to see the full line of Seaview products.
|
|
| ... products without information |
| |
|
|