|
|
Digital Meets Echo Souonder
CVS-126 has wide viewing angle and brilliant, sunlight viewable 5.7” color LDC display with anti-reflective glare coating.
Powerful 600W with dual-frequency 50/200 kHz operation is available for both shallow and deep water fishing.
Important functions
- Digital signal processor (DSP) for a clearer image that enhances fish targets, plus auto function for the most reliable setting and best performance.
- You can store up to 10 screen images in built-in memory for recall later.
- Fishing Hot Spot function leads you back to your favorite fishing hot spots with input from GPS sensor.
- Exclusive sonar tone identifies what’s under your boat with different sounds for fish and schools of fish.
|
|
- Compact sized display unit (6.5" TFT LCD)
- No paper (Optional : External printer is available)
- High accuracy and high reliability
- Depth data for last 24 hours in memory to play back the past sounding information
- Meets IMO standars MSC.74(69) Annex 4
|
|
- High-resolution and clearly display (10.4"TFT LCD)
- Built-in printer for copy of the echogram history
- High accracy and high reliability
- Depth data for last 24 hours in memory to play back the past sounding information
- Meets IMO standards MSC.74(69) Annex 4
|
|
The SKIPPER GDS101 is one of the markets most sold Navigational
Echo Sounder. The echo-sounder graphics are continuously
shown on the LCD along with relevant navigational details. External
connectors are provided for printer, remote VGA and NMEA in/output.
|
|
The SKIPPER GDS 102 is a dual channel navigation Echo
Sounder with a large, high resolution colour LCD display. The
echo-sounder graphics are continuously shown on the LCD
along with relevant navigational details. External connectors
are provided for printer, remote VGA and NMEA in/output.
It contains features as:
- NMEA 0183
- transducers between 10-49kHz and 50-250kHz can be connected.
- Colour LCD 10,4” display
- Two frequencies can be simultaniously showed in the display
- Alarm functions
- Memory functions
- Wheelmark
|
|
The SKIPPER ED165 is a print based Navigational Echo Sounder.
Highlighted features are:
- NMEA 0183
- 50 or 200kHz transducers can be mounted
- Digital depth display
- 6“ Paper Recorder
- Digital Readout
- Depth Alarm
- NMEA 0183
- Recorder Off Mode-IMO Specifications
|
|
-10.4-inch daylight viewing TFT LCD screen with 3 selectable background
colours
-Single or dual channel operation covering 2 to 1000 meters of depth in 8 range steps manually or automatically
-Single channel 50,100 and 200 kHz
-Dual channel 50/100, 100/100 or 50/200 kHz
-With a single key selecting channel 1 or channel 2 or split screen
-Automatic TVG, automatic receiver gain
-Up to 24 hours automatically stored data
-Stored data can be displayed graphically and digitally
-Connection for graphics printer
-Alarm function audibly and visually
-Both, AC and DC power supply with automatic switchover
-RS 232 C and RS 422 NMEA output for ECDIS, VDR, Repeater etc.
-Fully compliant to IMO resolution MSC 74/69.
|
|
-8-inch daylight viewing TFT LCD screen with 3 selectable background colours
- Single or dual channel operation covering 2 to 1000 meters of depth in 8 range steps manually or automatically
-Single channel 50,100 and 200 kHz
-Dual channel 50/100, 100/100 or 50/200 kHz
-With a single key selecting channel 1 or channel 2 or split screen
-Automatic TVG, automatic receiver gain
-Up to 24 hours automatically stored data
-Stored data can be displayed graphically and digitally
-Connection for graphics printer
-Alarm function audibly and visually
-Both, AC and DC power supply with automatic switchover
-RS 232 C and RS 422 NMEA output for ECDIS, VDR, Repeater etc.
-Fully compliant to IMO resolution MSC 74/69 and Wheel Mark regulation.
|
|
-Compact sized display unit (6.5" TFT LCD)
-No paper (Optional : External printer is available)
-High accuracy and high reliability
-Depth data for last 24 hours in memory to play back the past sounding information
-Meets IMO standars MSC.74(69) Annex 4
|
|
-High-resolution and clearly display (10.4"TFT LCD)
-Built-in printer for copy of the echogram history
-Depth data for last 24 hours in memory to play back the past sounding information
-Meets IMO standards MSC.74(69) Annex 4
|
|
Introduction
The EN 250 is a navigation echo sounder equipped with a large, high-resolution LCD, which gives instant access to all vital information. Graphic echo sounder data consisting of the immediate depth and a record of soundings are continuously displayed.
Benefits of our EN 250 Navigation Echo Sounder
- Both AC/DC main power input (115/230 Vac and 20 to 40 Vdc)
- You can operate 'soft keys' in 10 different 'soft key' screens
- 24 hours memory storage of recorded depth data and GPS input
- Rugged and robust mechanical design
|
|
|
|
|
|
|
- Quick acquisition of tidal and fishfinding information
A current drift and set is displayed on own ship's trail(*1) to observe a wide range of tidal currents. Own ship's drift can be grasped at a glance. Rips between two different currents can also easily found on the graphic display of current, water depth and temperature (*2) changes with time. Ship Speed Current Display 1(graphic) Current Display 2 (numeric) Ship Speed Display 3-layer current values Fore/aft speed Port/starboard speed Water temperature graph
-3-layer current values
1. Four-directional Fish Echoes Multi-display CRT
You can view fish echoes in four-directional, two-directional ahead, or in any one-directional mode. This feature enables easy tracking of fish. Just as in an ordinary fishfinder, you can suit the display to the fish type or sea conditions by abjusting the sensitivity.
2. Simultaneous Display of Fish Echoes and Tidal Current
You can check the tidal current while displaying fish echoes.
3. Simultaneous Display of Current Directions and Ship Speed
- Three layers (top, middle, bottom) of absolute tidal currents can be displayed at the same time. You can select the depth of each layer.
- Constant display of ground speed, depth, and trip distance.
- The relative current (relative to the C layer (lowest layer)) and the absolute current (relative to the sea bottom) can be displayed at the same time. Use this feature as a source of information for safety when diving or fishing.
|
|
Compact 3-unit design for ease of installation and maintenance
High definition 10.4" color LCD
Blackbox system configuration allows use of optional CRT or LCD monitors
Continuous display of tide speed and direction at the three depth selected layers
Triple-beam system for less error in tide current detection
True tide current presentation with external GPS navigator and Gyrocompass
|
|
WASSP is a unique combination of multibeam sonar and PC processing power designed to provide Operators with unparalleled information about the Marine environment. WASSP illuminates a 120° swath port-starboard across the Seafloor. WASSP then receives 112 dynamic beams, each containing detections from water column and seafloor.
WASSP then generates fish school, seafloor object, seafloor bathymetric profiles and changes in seafloor hardness information from 112 beams.
WASSP will enable you to find and position:
- reefs & wrecks
- fish schools
- seafloor hardness changes
- foreign objects in the water column or on the seafloor.
|
|
|
The FS-3DT is one of FarSounder's main products for surface ship navigation and obstacle avoidance which uses Dual Transmission™ technology. Like the FS-3, it provides a 90° field-of-view depth map with a single ping. However, the FS-3DT also includes a narrow beam 1/4 mile range mode. This Dual Transmission™ design can be configured to automatically switch between the standard 90° ping and the long range narrow beam ping
|
|
|
The FS-3ER is FarSounder's latest product introduction for longer range surface ship navigation and obstacle avoidance which uses Dual Transmission™ technology. Like the FS-3DT, it provides a 90° field-of-view depth map with a single ping. However, the FS-3ER also includes a narrow beam 800m – 1,00m range mode. This Dual Transmission™ design can be configured to automatically switch between the standard 90° ping and the long range narrow beam ping.
|
|
|
The FS-3DT Bistatic has been introduced after careful consultation with industry, to meet the needs of certain vessel types that wish to take advantage of the FS-3DT's superior performance. By mounting the transmitter and receiver in separate modules has allowed the form factor to be significantly reduced, together with a more streamlined styling.
|
|
|
The EM 710 multibeam echosounder is a high to very high resolution seabed mapping system capable of meeting all relevant survey standards. The system configuration can be tailored to the user's requirement, allowing for choice of beam widths as well as transmission modes. The minimum survey depth is from less than 3 meters below the transducers, and the maximum depth is approximately 2000 meters, somewhat dependant upon array size. Across track coverage (swath width) is up to 5.5 times water depth, to a maximum survey depth more than 2000 meters.
|
|
|
|
|
|
|
The FS-3 DT is a new product which uses Dual Transmission™ technology. It provides a 90 degree field-of view depth map with a single ping. However, the FS-3 DT also includes a narrow beam 1/4 range mode.
This Dual Transmission™ design can be configured to automatically switch between the standard 90° ping and the long range narrow beam ping. The system includes a 2U rackmount power module and a stream-lined sonar head with Dual Transmission™ capabilities. The user interface is SonarSoft™ software which is a Windows XP software package that is capable of networking a single sonar head with up to 4 user interface
stations. The FS-3 DT operates at 60 kHz and has an accuracy of about a 1.6 degrees. The FS-3 DT is capable of generating three dimentional images with a single ping even in shallow water.
It can be used for obstacle avoidance and navigation to help mariners avoid hitting shipping containers, rocks, and whales. No moving parts are used in the FS-3 DT system. There is no need to wait for the system to scan in various directions to build the image. The technology is capable of scanning every angle simultaneously.
|
|
|
The FS-3 is FarSounder's base product and today is used as the starting point for special projects such as diver detection and localization and AUV/ROVs. Until the introduction of the FS-3DT the FS-3 was the original 3D Forward Looking Sonar designed as a surface ship navigation device capable of detecting whales, shipping containers, and other in-water obstacles. Unlike other Forward Looking Sonar products, the FS-3 is capable of generating a 3-dimensional depth map over its entire field-of-view with a single ping. This system is not only capable of indicating how far away targets are, but also at what range and how deep the target is located.
|
|
The World's Best Value in Omni Commercial Fish Finding Sonar
The MAQ SONAR family of Omni Fishing Sonar products offer the Best Performing products for the price. Proudly built in CANADA the MAQ Sonar product line consists of a group of wide-band 360 degree "all around" view Commercial Fish Finding Sonar built to be the best solution for Shallow Water and Pelagic Species fishing.
|
|
| ... products without information |
| |
|
|