|
|
- crane jib up/down and rope movement in/out by hydraulic
- manual or hydraulic jib rotation
- flexible remote control
- no rope damage possible, due to hydraulic rope drawing-in
- basic material stainless steel, with special surface treatment
The ALMAR deckcrane product line was developed to lift dinghies and jet-ski onto the fly-bridge or bathing platfom. At this construction the ordinary winch has been redesigned and new methods have been applied. With this new rope system intwist or damages are impossible.
With a stable deck the installation is done with 6 screws onto the bottom plate. When connecting it with the fly-bridge it is necessary to use a counterplate with supporting tube to achieve utmost stability.
|
|
|
|
|
|
|
EZ-Double-Telescoping Boom Deck Cranes For well over a decade the EZ-Systems Hydraulic Deck Crane has proven to be of the highest state-of-the-art yacht crane technology in an aesthetically pleasing design.
Nautical Structures manufactures the Double-Telescoping-Boom crane design in capacities from 2500-pounds to over 8000-pounds. The Double-Telescoping Boom crane has been engineered and designed as a true state of the art yacht crane, utilizing our Hydraulic Linear Winch technology.
The EZ-Double-Telescoping-Boom Crane’s telescoping aluminum boom is capable of being loaded to its full safe working load capacity in any position without restriction. The intelligent engineering inherent in this design allows distributed load-deflection across the boom during moments of high dynamic loading, reducing the amount of shock-loading transmitted to the deck. Virtually silent-operating, our Hydraulic Linear Winch system, a totally non-fouling winch design reflects the innovative and dependably safe operating characteristics built into the extending boom. This feature adds the additional element of operational safety as the winch travels with the boom during operation of the crane, preventing any possibility of two-blocking the system causing damage to the cable.
|
|
|
Our range of cranes has been significantly expanded since our partnership with Simpson Davits, and we are now pleased to present some of the best quality, and highest repected cranes in the world today.
|
|
Nautical Structures Overhead Beam Cranes are designed state-of-the-art. Utilizing Linear-winch technology, our beam cranes operate with absolute precision control. Capacities limited only by the size of the yacht, these cranes provide effective tender-handling solutions for the large tender.
|
|
|
|
|
|
|
For over a decade the EZ-Systems Hydraulic Deck Crane has proven to be the highest state-of-the-art yacht crane technology in an aesthetically pleasing design. The EZ Systems hydraulic deck crane is available in lifting capacities of up to ten-thousand pounds, and in stowed boom lengths starting at twelve-feet. Any of these cranes may be special-ordered built to MCA Mega Yacht Code compliance.
This specification sheet describes our smaller cranes with lifting capacities of up to 5000 pounds. The EZ-System’s telescoping aluminum boom is capable of being loaded to its full safe working load capacity in any position without restriction. The intelligent engineering inherent in this design allows distributed load-deflection across the boom during moments of dynamic loading, reducing the amount of shock-loading transmitted to the deck. Virtually silent-operating, our Hydraulic Linear Winch system, a totally non-fouling winch design reflects the innovative and dependably safe operating characteristics built into the extending boom. This feature adds the additional element of operational safety as the winch travels with the boom during operation of the crane. This prevents any possibility of two-blocking the system causing damage to the cable.
|
|
Ideal solution for the movement of loads in a circular area next to the working place.
GH column or wall jib cranes, with electrical or push rotation, with wire rope or chain hoist.
Industrial jib cranes from 500Kg. up to 20 ton.
|
|
|
|
|
|
|
The Aqua-Terra static power crane is specially designed to lift boats from the water on a trailer or cradle. Operation is remote controlled.
The Aqua-Terra 30 is standard equipped with four chainhoists, optional are four cable hoists. Also optional is a mastcrane for sailboats. This crane is also radio remote controlled. When a mast crane is built on the Aqua-Terra, the railing and stairs are made of stainless steel. The aqua-Terra 30 can rotate 360 degrees CW and CCW.
All wiring of the Aqua-Terra cranes are internal to reduce maintenance.
Technical specifications
High Grade S355 Steel
Capacity, 30.000 kg
Capacity mastcrane, 2.000 kg.
Hoists, chainhoists.
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Dimensions
Height under crossbeams, 7215 mm.
Max. outside distance hoists, 5000 mm.
Distance center crane to first hoist, 2550 mm.
Distance center firt hoist to center second hoist, 4500 mm.
All Hydrotrans equipment is built according to CE-regulations and is tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Hydrotrans has been supplying boat and material handling equipment since 1996. Standard models are the G2 (2 wheel steering) and G4 (4 wheel steering) yard transporters, and the SW trailer series for slipways, the RM series for remote control. A wide range of custom designs can also be provided to suit individual requirements.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The Aqua-Terra static power crane is specially designed to lift boats from the water on a trailer or cradle. Operation is remote controlled.
The Aqua-Terra 20 is equipped with four chainhoists, with an option of four cable hoists. A mastcrane for sailboats is also an option. The aqua-Terra 20 can rotate 360 degrees in both directions.
All wiring of the Aqua-Terra cranes are internal to reduce maintenance.
Technical specifications
High Grade S355 Steel
Capacity, 20.000 kg
Capacity mastcrane, 1.500 kg.
Hoists, chainhoists.
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Dimensions
Height under crossbeams, 7195 mm.
Max. outside distance hoists, 4500 mm.
Distance center crane to first hoist, 2550 mm.
Distance center firt hoist to center second hoist, 4000 mm.
All Hydrotrans equipment is built to CE norms and all equipment can be built with American standard SAE fittings. All cranes are tested at site.
All Hydrotrans equipment is built according to CE-regulations and is tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Hydrotrans has been supplying boat and material handling equipment since 1996. Standard models are the G2 (2 wheel steering) and G4 (4 wheel steering) yard transporters, and the SW trailer series for slipways, the RM series for remote control. A wide range of custom designs can also be provided to suit individual requirements.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
To meet customer demand Hydrotrans has produced two new Aqua-Terra crane models, the 3 ton, and 5 ton Aqua-Terra. Offered with the option of lift controls either mounted on the tower, operated by cable, or operated by remote control, and designed to be rotated manually, these two cranes are perfect for yacht and sailing clubs, dealerships, and small boatyards.
Built with S355 steel, and painted with 2 coats of epoxy primer and 1 coat of a 2 component topcoat, RAL 9001, all Hydrotrans equipment is built to CE norms and is tested at the factory before shipment. Hydrotrans offers an industry leading 5 year warranty on all its equipment.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. The standard models are the G2 (2 wheel steering) and G4 (4 wheel steering) yard transporters, the SW series for slipways, the RM series for remote control and the Aqua-Terra series of cranes. A wide range of custom designs can also be provided to suit individual requirements.
Please note that we are looking for agents. If you are interested in this opportunity, contact us at the address below for more information.
For additional information on all of our boat handling equipment contact:
Hydrotrans BV
Sales and Marketing
T (0031) 0522-242112
HYDROTRANS, WE DON'T JUST BUILD EQUIPMENT, WE BUILD SOLUTIONS.
|
|
Capacity from 1>25 ton
Rotation 360° with gear and inverter and dual speeds on all movements.
Including radio-control.
The auxiliary hoist for 500/1000 Kg is included.
Pillar height, arm lenght and lifting height are variable, according to the specification of the customer.
|
|
This series include a standard version with pillar or with console,capacity up to 2.000 kg. Included is the Kito chain hoist and fixingplates. Manual or motorized movements on request. CE compliant
|
|
Capacity up to 80 tons, sizes can vary according to the customer'srequirements. Movements with inverters, remote control, hinged legs and wheelboxes as well as anticollision-bumpers are commonly applied.
The high reliability, which has always been a distinctive feature of our products, is due through the employment of the very best materials and components.CE compliant.
|
|
The Space Saving Solution, Available from 4 - 100 ton
General features: 1 or 4 hoisting points
The Roodberg Static Power Crane is available in many formats equipped with:
- Electrical chain hoists
- Electrical cable winches
- Hydraulic cable winches
-integrated Jib crane
-fully remtoe controlled
-360 degrees and mroe slewing
|
|
Nautical Structures manufactures a very complete line of hydraulic deck cranes, available fully classed for vessels over 500gt when necessary. Designs include; mono-boom, telescoping-boom, knuckle-boom and lay-down boom crane types. Single-line hoisting capacities range from 2500-pounds [1136-kg] through 12,000-pounds [5,500-kgs].
The Nautical Structures Deck Crane is built to order specific for each project, and is a very popular specification in many new-build projects.
|
|
This series includes single and double beam cranes in box construction made of steel sheet, capacity from 2 to 80 tons.
|
|
Every HYDROMAR yacht crane is constructed to the design standards for modern lifting appliances in a marine environment. They represent the finest "value for money" available.
HYDROMAR has models perfectly suited to every operation.
Each is the result of over 20 years experience in the design of modern electro-hydraulic lifting equipment.
HYDROMAR deck cranes are stronger than most, and offer an outstanding ease of operation with a wide range of standard drives, hydraulics and controls.
|
|
|
|
Lifting cranes
