|
|
These legs have an adjustment of 600mm in total enabling the yacht to remain upright on an uneven seabed. We recommend these legs for boats over 10 tons displacement.
All legs are telescopic for easy stowage and are light and easy to use.
|
|
* Practical and robust well-engineered design
* Strong yet simple construction
* Easily adjustable in all dimensions to suit individual hulls
* Quick, easy modular assembly with no loose bolts
* Supplied fully galvanised to BS 729
* Endorsed by marinas & boatyards
|
|
|
Use Brownell keel stands in place of conventional wood blocks to support the boat's weight. Use one keel stand for each 10,000lb / 4,550kg of vessel weight, spaced evenly along the keel. Always use a minimum of two keel stands. Boats should be stored on a flat, even surface.
|
|
A modular concept by half cradles for exterior long time storage or for workshop use, a shoring up system simple, quick, sure and tested
The product is an original system based on self supporting feet, for use
|
|
These motor boat stands are designed for boats from 1 ton to 20 tons.The smallest model weighs 10 kg ( min height 70cms - max 100cms )
The largest is suitable for boats over 15 tons, weighs 22 kg and has an adjustment from 117cms to 210cms.
|
|
At Con-o-lift, we offer proven solutions for the safe and convenient storage of all types of vessels. Our hot dip galvanized boat stands for power and sail provide the security and versatility required to meet the needs of your operation.
All Con-o-lift stands are hot dip galvanized for maximum longevity and performance.
Our rugged storage stands feature a welded steel base, combined with a threaded screw top assembly. A treated plywood pad surface is secured to the screw by means of a removable bolt with nylon friction washers, enabling the top to maintain a preset position for more convenient set-up.
Con-o-lift stands are stackable, and have been designed for convenient handling. While all models feature rugged steel construction, they remain relatively light and easy to handle.
|
|
Hydrotrans HBS Model Boat Stands
These high quality boat stands of galvanized steel are well known as the simplest form of support for a boat or yacht that is stored out of the water. We offer these in various heights from 560mm to 1930mm. The smaller stands are suitable for vessels with relatively shallow drafts such as motor cruisers. The larger are perfect for sailboats. For additional information contact:
Hydrotrans B.V. a Gérard Beheer Company
Hesselterlandweg 6
7942 HZ Meppel
Netherlands
www.hydrotrans.nl
Tel: +31.522.242112
Fax: +31.522.242116
|
|
Hydrotrans T-Cradles :
Manufactured of steel box section and fully galvanised to BS 1461, Our Hydrorans T-Cradle is available in sizes from 6 to 20 tons. This cradle can be used with any Hydrotrans boat handling trailer and can also be used in with the majority of standard 3-point-lift boat movers. In addition to being good looking, these cradles are competitively priced and of top level engineering and construction, and are sure to improve boat yard operation.
For more information, contact
Hydrotrans B.V. a Gérard Beheer Company
Hesselterlandweg 6
7942 HZ Meppel
Netherlands
www.hydrotrans.nl
Tel: +31.522.242112
Fax: +31.522.242116
|
|
|
Our Transportable cradles are designed for boat owners who need to remove the cradle from site when not in use. These cradles are delivered on pallets to the boat yard. The longest section is 1.20m, thereby making it easier to transport off site in an estate car or hatchback. All cradles are manufactured in mild steel sections and are fully galvanised.
|
|
* Practical and robust well-engineered design
* Strong yet simple construction
* Easily adjustable in all dimensions to suit individual hulls
* Quick, easy modular assembly with no loose bolts
* Supplied fully galvanised to BS 729
* Endorsed by marinas & boatyards
|
|
|
These cradles are suitable for yachts from 10m to 14m. Made from galvanised steel they are designed for use in boatyards where they can be stacked to save space when not in use.
|
|
• 3,600 Pound capacity
• Constructed of 2" tubular stool
• High gloss black powder coat finish -(custom colors available upon request)
• All weather Poly Wood bunk
• Low profile 11/2" floor clearance
• Bunks may be used on either side of frame
• Casters are bolted in all four corners
• 6" x 2" phenolic wheels bolted in all four corners
|
|
• 7,200 Pound capacity per pair
• High gloss black powder coat finish -(custom colors available upon request)
• All weather Poly Wood bunks
• Low profile - approximate 11/2" floor clearance
• Formed structural tubing
• Positive pin lock bunk adjustment cannot slip
• Bunks may be used on either side of frame
• 6" x 2" phenolic wheels bolted in all four corners
|
|
• 13,000 Pound capacity per pair
• Vertical upright can lie mounted inside or outside of boat dollv frame
• High gloss black powder coat finish -(custom colors available upon request)
• Reinforced framing around vertical adjustment tubes
• Low profile - approximate 11/2' floor clearance
• 24 degree deadrise formed construction (not welded) for maximum strength
• 2" adjustable vertical upright with 2" x 6" Poly Wood bunks
• 6" x 2 1/2" phenolic wheels bolted in all four corners
|
|
ELECTRO-HYDRAULIC CRADLE FOR BOATS UP TO 10 TONS, COUPLED TO THE ELECTRIC JACK FORMULA 1 SPECIALE.
TECHNICAL FEATURES:
CRADLE DIMENSIONS: Length 530 cm
Width 200 cm
4 rear wheels, 2 front feet
7 hydraulic pistons, controlled by the header of the jack Formula 1, provided with 10 pushbuttons
2 batteries, 120 Ah – motor pump, 300 bars, with 4 solenoid valves
The rear side can be opened left/right sides, enabling the cradle extraction when the boat is resting on the blocks.
The cradle is connected to the jack Formula 1 by two big pins, for the motor pump operation.
|
|
|
Our Motor Boat Dollies have been designed as a cost-effective means of safely storing small motor boats and transporting them around a paved area or showroom without the need of a full trailer. This means that in the tight surrounds of most sales showrooms, the Motor Boat Dolly can actually save a considerable amount of space. The new Motor Boat Dolly can be easily stored when not in use and being fully galvanized, requires virtually no maintenance. A pair of Dollies will carry up to 4 tons displacement. Rubber pads are fitted to fully protect the hull.
|
|
|
|
|
|
|
TRIPOD BOAT STANDS
*SEVEN POWERBOAT SIZES (STRAIGHT HEAD) 12” TO 72” *FOUR SAILBOAT SIZES (ANGLED HEAD) 36” TO 84”
*STACKABLE AND/OR NESTABLE *CHROME PLATED SCREW RESISTS RUST
*TRIPOD DESIGN FOR GREATEST STABILITY *LARGE SURFACE BEARING AREA
Kleeco TRIPOD BOAT STAND PRICE LIST
Power Boat Stands
Stand Description Height Range 1-19 20-99 100-199 200+
SQJS Squat Power Boat Stand 12"-18" $65.00 $63.13 $58.50 $56.88
ESJS Extra Small Power Boat Stand 18"-24" $68.00 $62.90 $61.20 $59.50
SPBJ Small Power Boat Stand 24"-36" $72.00 $66.60 $64.80 $63.00
IPBJ Intermediate Power Boat Stand 30"-42" $75.00 $69.38 $67.50 $65.63
MPBJ Medium Power Boat Stand 36"-48" $82.00 $75.85 $73.80 $71.75
LPBJ Large Power Boat Stand 48"-60" $84.00 $77.70 $75.60 $73.50
XPBJ Extra Large Power Boat Stand 60"-72" $95.00 $90.25 $87.88 $85.50
Sailboat Stands
SSBJ Small Sail Boat Stand 36"-48" $88.00 $81.40 $79.20 $77.00
MSBJ Medium Sail Boat Stand 48"-60" $95.00 $90.25 $87.88 $85.50
LSBJ Large Sailboat Stand 60"-72" $110.00 $104.50 $101.75 $99.00
ELSBJ Extra Large Sail Boat Stand 72"-84" $140.00 $133.00 $129.50 $126.00
Heads Only (Flat or V) $42.50 $39.31 $38.25 $37.19
Stand Only (without Head) (-$10) (-$12) (-$14) (-$16)
*INCLUDES STANDARD SWIVEL HEAD AND HAND NUT
|
|
• Heavy industrial strength steel construction
• Adjustable heights
• Many sizes to choose from
• 10" x 10" Poly Wood pad for under hull
• Key slotted for safety chain
• Stackable for easy storage
• High gloss painted surface
|
|
|
When it comes to boat stands, Brownell offers you the finest quality and the most experience. Since David "Fred" Brownell started his inland boat yard in 1954, which led to the invention of the Hydraulic Trailers and Boat Stands, the Brownell family and their employees have dedicated themselves to providing customers with highly reliable and efficient boat handling equipment. This method of boat handling revolutionized the boating industry. The result has been that we are the World's largest manufacturer of boat stands and produce the finest trailer of its type in the World.
|
|
|
|
|
|
|
TRIPOD BOAT STANDS
*SEVEN POWERBOAT SIZES (STRAIGHT HEAD) 12” TO 72” *FOUR SAILBOAT SIZES (ANGLED HEAD) 36” TO 84”
*STACKABLE AND/OR NESTABLE *CHROME PLATED SCREW RESISTS RUST
*TRIPOD DESIGN FOR GREATEST STABILITY *LARGE SURFACE BEARING AREA
Kleeco TRIPOD BOAT STAND PRICE LIST
Power Boat Stands
Stand Description Height Range 1-19 20-99 100-199 200+
SQJS Squat Power Boat Stand 12"-18" $65.00 $63.13 $58.50 $56.88
ESJS Extra Small Power Boat Stand 18"-24" $68.00 $62.90 $61.20 $59.50
SPBJ Small Power Boat Stand 24"-36" $72.00 $66.60 $64.80 $63.00
IPBJ Intermediate Power Boat Stand 30"-42" $75.00 $69.38 $67.50 $65.63
MPBJ Medium Power Boat Stand 36"-48" $82.00 $75.85 $73.80 $71.75
LPBJ Large Power Boat Stand 48"-60" $84.00 $77.70 $75.60 $73.50
XPBJ Extra Large Power Boat Stand 60"-72" $95.00 $90.25 $87.88 $85.50
Sailboat Stands
SSBJ Small Sail Boat Stand 36"-48" $88.00 $81.40 $79.20 $77.00
MSBJ Medium Sail Boat Stand 48"-60" $95.00 $90.25 $87.88 $85.50
LSBJ Large Sailboat Stand 60"-72" $110.00 $104.50 $101.75 $99.00
ELSBJ Extra Large Sail Boat Stand 72"-84" $140.00 $133.00 $129.50 $126.00
Heads Only (Flat or V) $42.50 $39.31 $38.25 $37.19
Stand Only (without Head) (-$10) (-$12) (-$14) (-$16)
*INCLUDES STANDARD SWIVEL HEAD AND HAND NUT
|
|
| ... products without information |
| |
|
|