|
|
Bellingham Marine’s timber floats provide easy trench access for utilities. They are precision engineered for your site to provide a system that is balanced both as an integral unit and within its environment, enabling Bellingham’s timber float systems to meet and exceed anticipated load and locale requirements.
|
|
Unideck® Inland-Water Flotation System: Capitalizing on decades of experience in salt-water dock systems, Bellingham Marine provides Unideck® metal frame systems for inland waterways, rivers and lakes. The result is the same concrete-decked appearance and durability as Unifloat® in a practical design for fresh-water.
|
|
The Premier pontoon range represents the latest technology in concrete pontoon construction and is a high specification modular pontoon system for marinas.
All units can be provided with integral top entry service ducts and are available in a wide range of standard sizes. These units are of continuous flotation providing a high loading capacity with higher freeboard option for large boat marinas. Premier pontoons have two freeboard options (PE and PEH).
The floats are connected by flexible rubber bolt joints and can easily be moored by chain, Seaflex or piles.
Optional accessories include concrete coatings, wooden deck, cable ducts, service channels and fenders as well as fixing rails, which incorporate universal adjustments for fingers up to 12 m and Super Yacht fingers.
As with all Marinetek concrete systems these are of exceptionally strong construction with 50 year design lifetime and are maintenance free.
|
|
Marinetek Heavy Duty pontoons represent the latest technology in pontoon construction. Designed for boat mooring in modern marinas, overpass bridges and landing stages, they are very strong and maintenance-free with a high loading capacity and very long service life.
The pontoons are manufactured from strong heavy duty floats connected by flexible rubber bolt joints, cornerwise and sideways if required. Optional accessories include different kinds of concrete coatings, softwood or hardwood decking, cable ducts and service channels (for electricity and water) as well as fixing rails, which incorporate universal adjustments for mooring fingers up to 12 m and Super Yacht fingers.
Mooring can be by chain, pile or Seaflex. All Heavy Duty floats have a unique anchoring system specifically designed to accommodate Seaflex for easy and safe mooring.
|
|
- Unlimited configurations
- Easy and quick assembly
- Environmentally friendly
- Light, sturdy and safe
- Maintenance free (100% plastic)
- Resistant to pollution and UV-rays
- Limited Lifetime Warranty
|
|
International Marine Floatation and its predecessor Danbuoy have been manufacturing positive concrete floatation platforms since 1983. The IMF patented connector system was developed for use in the aquaculture industry with its high requirements for performance in rough water. Floating structures are custom designed to meet various load capacities and customer specifications.
Our platforms provide a low stable, non slip surface for farm personnel. They are unsinkable, fireproof, maintenance free, and require no toxic hull paints, making them well suited for environmentally sensitive locations.
|
|
Versadock is an extremely durable and adaptable product making it an excellent choice for your industrial needs.
Versadock has provided docks for just about any need:
- Aqua-culture pens
- Portable bridges
- Work platforms
- Ferrys and barges
|
|
WITH DOCK: The aluminum dock is a resistant and anti-corrosive dock which can be attached to any marina. On the long run, it can represent an alternative economic to the other solutions to be applied to the marinas.
It is anti-corrosive, thanks to its aluminum structure, and it car-is protected by oxidation
|
|
|
Durability, versatility and elegance are the main peculiarities of the series ANTARES. ANTARES pontoon has a main structure made of special aluminium alloy section bars for marine environment. The decking is made of precious exotic wooden staves fixed with. stainless steel bolts and screws. Buoyancy is assured by concrete floats with high density polystyrene foam core. Thanks to the special design of main profiles and to the element modular structure, mooring accessories (cleats,fingers,etc.) and modules are interconnected with the utmost flexibility. Moreover, the pontoon is provided with lateral duct covers to house the equipment. They are finished with continuous fenders made of wood or anti-age plastic materials. The head is preset for longitudinall connection of more modules through a semi-elastic "silent-block" system composed by neoprene shock absorbers and stainless steel bolts and screws.
|
|
The Marinetek Aluminium pontoon is easy to handle and simple to install. The pontoon is designed for general-purpose use and can be constructed to exact customer requirements in terms of length.
The elements have unique plastic floats with stabilisation wings making them very stable despite their light weight. The pontoon frames are manufactured from strong aluminium profile and the elements are connected by flexible rubber bolt joints, cornerwise or sideways if required. The deck of the pontoon element is either profiled and treated Finnish pine or hardwood. Pontoon elements come with wooden fenders and no. 8 flip-up cleats.
The UIM Class 1 World Powerboat Championship has selected Marinetek as its Official Supplier. Marinetek Aluminium pontoons are used in the wet pit area in the Class 1 GP events.
|
|
Concrete pontoons with vertical walls and fender bar are used for berthing of small boats and make up the backbone of the marina. They are safe and solid, offering long life and resistance to high loads.
Maintenance and pollution-free.
Advantages of Concrete Pontoons
* 10 YEARS LIMITED WARRANTY FOR CONCRETE
* ENVIRONMENTAL SAFETY GUARANTEED
* Constant freeboard irrespective of water level fluctuation
* Combination of solidity and floatability
* Possibility to tailor marina to fit the water area and customer needs
* Reasonable price plus safety and convenience
* Possibility of changing configuration of marina and number of mooring berths
* Environmentally responsible utilising sustainable components
|
|
|
Walyfloat is a floating monoblock in armed concrete, with polystyrene foam core. Special central space for plants. The decking is realized in precious exotic wood.
|
|
|
Gigafloat pontoon is characterized by a main structure made of reinforced concrete with polystyrene foam core. The decking, with width of 2,5 - 3,0 - 3,5 - 4,0 - 5,0 meters, could be realized in concrete treated with special finishing, or in precious exotic wood (other variation on request). The peculiarities of this model are: one piece concrete float, high deadload and stability, qualities that make it like a quay. The pontoon could be provided with hard wood or WPC removable duct covers, fender lateral guide, accessories and fingers. Flexible joint system "Silent block" with stainless steel cables.
|
|
Beside the standards product range and thanks to its high skilled technical staff, Sistema Walcon is able to design and produce any kind of structure to meet any customer`s specific needs.
The dimensions, buoyancies, or options are available to meet any specific requirement (mega yacht pontoons, leisure, special events, water sports, rowing, gas station, advertisement supports, industrial and fishing sectors.
|
|
|
|
|
|
|
Our Kleeco M dock systems are built solid with 2"x2"x3/16" steel angle. They are hot dip galvanized to protect it from the elements. M Docks work great as marina dock systems as well as residential floating docks and other commercial floating dock applications. Key features and options include:
Numerous Decking Options: Treated lumber, Steal Deck, Recycled plastic lumber, Procell plastic decking, specialty lumbers. We'll customize to meet your needs.
Modular Design: Allows for ready addition to existing system or replacement of damaged fingers.
Customized Dimensions: Various length, width and height options available.
Main Pier and Finger Designs: We can design to accomodate most any desired configuration and layout.
Bulkhead Mount Designs: Double hinged ramp or single hinged designs available to mount on existing bulkheads.
Accessories: We can provide fenders, cleats, power posts, dock boxes, hand railing, ramps, skirting etc.
Specialty Applications: Fuel Platforms, Work Platforms, House Barges etc. We'll be happy to work with you to engineer a system that will meet your need.
|
|
|
|
|
|
|
|
The main characteristics of the pontoon series Nettuno are strenght and a good quality/price ratio as well as modularity.The pontoon consists of a sturdy supporting framework made of electrowelded hot-dip galvanised steel bars. It is supported by concrete floats with high density polystyrene foam core. The decking is made of precious exotic wooden staves fixed with stainless steel bolts and screws. Moreover, the pontoon is provided with aluminium or timber lateral duct covers to house the equipment. They finished with wooden continuous fenders. A modular holes system is peculiar to side beams and allows the connection of mooring accessories (rings, fingers, etc). The head is preset for longitudinall connection of more modules through a semi-elastic "silent-block" system composed by neoprene shock absorbers and stainless steel bolts and screws. The holes made at regular distance on the side beams allow the connection of mooring accessories at any position (rings, fingers, etc). Sturdy plates located in the junction area have been specifically designed for the Nettuno model in order to make the head more resistant to fatigue resistance than standard.
|
|
Marinetek Steel pontoons a modular walkway pontoon system designed for use in marinas.
The pontoons are steel structured, fully welded and galvanised. The frames are provided with side connection holes at 50 mm intervals for connection of mooring fingers, walkways and pile guides. Decking and fendering are in machined hardwood profiles as standard. A range of anti-slip and recycled decking materials are also available. Steel pontoons have two freeboard options (ST and STH).
Floatation units can be provided in concrete as standard or polyethylene including catamaran float options. Units are connected with semi flexible rubber bolt joints.
Pontoons are easily anchored by piles, chain or Seaflex.
|
|
|
|
|
|
|
Kleeco A Dock and T Dock boasts of heavy duty all steel construction. We use a heavy guage steel to build solid pontoons. The docks are then sand blasted and coated with a zinc rich primer. The lower half is then covered with a coal tar epoxy and the top half with a two part epoxy color coat. With over 40 years in the field these floating docks have shown superior strength and durability with many units seeing over 30 years of service.
Kleeco A and T Docks offer two primary applications. Main and Finger System: The main and finger system uses a T-Dock section as the main with A dock sections as the fingers. Numerous dimensions and configurations are available. Bulkhead Mount: Bulkhead mount docks consist of A Dock sections mounted to shore with a single or double hinge mounting system.
Kleeco A and T Dock key features: Heavy Duty Construction, Superior Durability and Service Life, Excellent Stability, Multiple Dimensions and Configurations to fit your needs. Ideal commercial floating dock for marina dock systems and other commercial applications.
|
|
Marinetek timber pontoons with concrete floats are long lasting, maintenance-free and economical to purchase. Systems are assembled using pre-fabricated timber-framed deck elements to create a rigid and continuous structure.
Systems with plastic floats are light and easy to handle. They are assembled using pre-fabricated components and are connected by flexible rubber bolt joints.
The pontoons are designed for boat mooring and general-purpose use and can be constructed to exact customer requirements in terms of length and loading capacity. They can be easily modified, even after installation, to suit many different shape and layout arrangements.
|
|
As the name indicates, Marinetek Super Yacht pontoons have been designed for mooring big boats and super yachts in the most modern marinas.
Based on the design used for Marinetek Breakwaters, Super Yacht units have extremely strong construction and joints, connections for even the strongest mooring points, heavy deck loading capacity and very good stability. They also feature wide decks and high freeboard to better suit larger vessels. Super Yacht pontoons have two freeboard options (SY and SYH).
Super Yacht pontoons can also be used for overpass bridges and landing stages. The floats are connected by flexible rubber bolt joints, cornerwise and sideways, if required.
|
|
- Unlimited configurations
- Easy and quick assembly
- Environmentally friendly
- Light, sturdy and safe
- Maintenance free (100% plastic)
- Resistant to pollution and UV-rays
- Limited Lifetime Warranty
|
|
Once your EZ Dock system is in place, you can rest assured that it will stay intact. Our wide variety of anchoring components are simple to install and save to use.
|
|
|
|
|
|
|
Floating dock for canal equipment: Built on the basis of structures aluminium 6005 AT6 marine quality sized according to needs with profiles of banks YACHTING, MEGA YACHTING or HEAVY and of floats to waterproof shells in polyethylene roto molded monoblock filled with expanded polystyrene with closed cells, our standard pontoons decline in different freeboard, buoyancy and widths (1m50, 1m75, 2m00, 2m25, 2m50, 2m75 and 3m00). Equipped with fenders and with wooden exotic decking or in materials composite, they can be anchored on piles, chains, elastomers, bracons, HEA and receive networks of fluids and fire, of signalling systems and harbour furniture.
MSE (Marina System and Equipment) revalues the projects of its customers by accompanying them in the conception, the realization and the maintenance of their port facilities.
Our experts, endowed with the last tools CAD and qualifications of a control office, study and carry out every work by dedicating to it know how to make for its height.
At the top of their technologies, our products with structures aluminum, made in accordance with the standards current, offers a high level of quality and design.
We build marinas, fishing harbors, boating centers, river stopping places, public or privative pontoons, jetties to passengers, floating or fixed pontoons, footbridges of access or crossing, catways, mooring arms, flat floating forms, fuel stations, artificial islands and the other innovations …
|
|
|
|
|
|
|
Metalu Marinas specializes in the design and construction of aluminium marina equipment
Since 1974, Metalu has been building marinas across the globe :
Europe, United States, Russia, Middle and Far east, Pacific and Indian Oceans... and has built over 50% of the marinas in France
We build floating and fixed docks with their access gangways for a range of installations ranging from leisure to professional :
"marina" docks : small and large leisure craft, fuel,waste water etc ...
"private" docks : inland waterways, rowing, swimming, leisure etc ...
"commercial" docks : landing stages for public, fishing vessel and other professional uses ...
Metalu Marinas is used to be in charge of any project worldwide, from one dock to a full marina, from design to installation :
Our engineering department, maritime specialist, is equipped with the latest design and calculation software for designing any type of dock for any site configuration, tailored to your specifications
Our marina systems are designed and built by personnel accredited by Veritas and are regularly tested by official inspection agencies. Inspections cover engineering and design calculations as well as welds and load tests.
|
|
|
Added value to your investments. Through the buzz wording ‘waterfront development’, we see all the possibilities for our customers to develop and convert access to water, a lake, a protected national park or a marina around which housing, retail and leisure can be integrated.
|
|
- Unlimited configurations
- Easy and quick assembly
- Environmentally friendly
- Light, sturdy and safe
- Maintenance free (100% plastic)
- Resistant to pollution and UV-rays
- Limited Lifetime Warranty
|
|
|
Rugged, adaptable, reliable, safe - the EZ Dock system has it all. Constructed with rugged polyethylene (LLDPE), our docks, boat lifts, and PWC lifts have a unique design that delivers outstanding load capacity, functionality, and safety. And our simple building block design allows virtually unlimited layout flexibility.
|
|
The fishing public loves our docks because they are engineered for people who love to fish and this earns the dock operators' approval.
Stability and Safety
People need to feel that the dock is stable and safe. We provide a sturdy railing system, a non-slip tread surface, and hardware that can withstand the roughest conditions.
Topper Fishing Docks provide the rugged strength and durability that ensures a long life and low maintenance cost.
Our fishing dock railing system is specifically engineered to handle the lateral thrust, fishermen exert when casting and leaning on the railing.
|
|
|
|
Floating docks
