|
|
Electro-Tec Deck Line is a cost efficient unobtrusive solution to provide power or water to individual berths. Deck Line is installed into any pontoon system, new or existing, and provides an un-cluttered appearance. As Deck Line fits flush into the deck, it will not be prone to damage from buggies or vandalism for example. Deck Line is available in a number of variations such as 16A or 32A, ½" water or ¾" water and can be powder coated to offer a choice of colours.
Deck Line is manufactured from a heavy duty high grade 316 Stainless Steel and is supplied as standard with locks to prevent unauthorised use or disconnection of supplies. Protective devices (MCBs and RCDs) for the Deck Line socket are installed within the closest DU on a remote system.
|
|
Harbour-In Connection boxes for electrical supply service
A flush mounted electricity connection box type ‘Drimmelen’ for any type of pontoon deck fitting. The connection box replaces the cut away in the decking material.
Electricity:
- Harbour-In box: 1x CEE /16A/230V
- Harbour-In box: 1x CEE /32A/230V
|
|
Super Yachts
Electro-Tec can provide a large range of services for super yacht berths such as:
Power supplies up to 600A 3 Phase
Socket outlets or directly connected
Water supplies up to 2”
TV / Internet / Data outlets
Sanitation pump out outlets
Super yacht pedestals can be supplied with all Electro-Tec metering systems for both electric and water services.
E-Max Superyacht Pedestal
The E-Max is designed to offer a large amount of services to super yacht berths. Capable of accommodating up to 400A 3 Phase socket outlets (or 600A 3 Phase direct connection) and all services detailed above, E-Max is the perfect solution for super yacht berths.
|
|
General protection 500 mA
Departures protection 300 mA
Lighting departure controlled by clock or photocell switch
|
|
BORNEO RANGE
made of TECK
IP56 enclosure
lighting (LED low power)
water in option
up to 4 electric sockets
|
|
FRS2
The remote connection unit is designed to be used in conjunction with a 2+2 master control unit. Manufactured from fibreglass and with either one or two socket outlets, the unit is controlled and supplied from a master service pedestal at an adjacent berth. BS EN60898-2 socket outlets, rated at either 16A or 32A can be mounted onto the remote unit and it is supplied with a galvanised shoe, designed to be fixed to your pontoon.
|
|
Bespoke Connection Units
Tell us your design criteria and we will manufacture a pedestal or connection unit to suit, providing electrical and mechanical characteristics allow.
In this unit the clients requirement for his permanent moorings on the River Thames was for a 32A metered electricity supply and a data outlet. A directional diffused light with a 9W low consumption lamp and control gear was also a requirement.
|
|
Service bollard type Pacific
PACIFIC: multifunctional service bollard in aluminium
The PACIFIC pedestal is the next of a new generation bollard constructed from extruded aluminium profile. More compact, lean yet very strong and rigid and fitted with one compartiment only. Leaving no room for any torsion resulting in tightly closed doors for a watertight solution. Different arrangements for electrical services standard with 4 CEE socket outlets; with w/o pre-payment, Sep-Card and Sep-key full automatic meter reading and control. Illumination optional by two downlight LED’s fitted underneath the top cover or impact resistant polycarbonate light head fitted with energy saving lamp. Optional with water tap and hose reel.
|
|
|
|
|
|
|
New dockside power supply unit at the markets best price...
TallyKey A/S in Denmark now introduces the latest addition to their supply product range: The TallyKey T1
The new model, called the TallyKey T1 fills the gap between more or less legal, "home-made" supply solutions and the well-known TallyKey T2, T6 and T8 pedestals.
The T1 is an elegant and durable design, made in PE-plastic and aluminium. It comes in three different variations, and the prices start at 135 €.
The basic model has two CEE-outlets of 16A 1-phase, protected by fuses and ELB circuit breakers. A model with electronic power meters is available, if you need individual registration of the power consumption. The top of the T1 range is a model with the popular TallyCard+ payment system.
The outlets and other electric parts are protected from wind and weather behind the stylish aluminium cover, and the product is waterproof according to IP56.
TallyKey T1 can easily be mounted on existing walls or poles, or on the elegant aluminium legs, supplied as an optional accessory.
"Our aim with the T1 was to target the entry level market, where the installations previously very often were made from scratch by the local electrician", says Leif Odgaard, CEO of TallyKey A/S. The T1 only exist in three variations, and it can therefore be produced in high volumes, at very low prices.
With a product as simple and inexpensive as the T1 available on the market, it simply does not pay to make anything yourself", concludes Leif Odgaard.
|
|
The fixed bollard for power supply has been designed to make multiple voltage connections easily. It is available as a single version (up to 6 sockets) or double version (up to 12 sockets). The options are a power supply version, water supply version and combination version.
The bollard is installed by fastening mason screws into a concrete slab. The waterproof level of the units protects the electrical components from oxidizing and bad contacts. Users are protected from electric shock. As an option it is possible to connect one or more sockets while keeping the door closed to avoid unauthorised connections. Made from cast steel and aluminium, this unit gives unequaled impact and vandal resistance.
|
|
materials: in resin polyester reinforced with stratified glass fibers by hand, pigmented with gelcoats isoftalici to chromatic high resistance, I use with it of an immensest range of colors
access systems: lock to key with triangular print
lighting system: fluorescent inner lamp to low consumption 9W
users: n. 4 Electrical workers
n. 4 Water
taken electrical workers: 16A 230V Interboloccate IP66 anticorrosion treatment
protections: n. 4 magnetotermici switches to protection of taken of electric power;
n. 1 magnetotermico switch to protection of the lighting system system;
n. 1 general switch differentiates them, to protection of the system Motive power, with threshold of participation to 0,03A;
taken water: n. 4 taps of the diameter of 1/2 " bulloneria Inox and levetta to Anodized butterfly anticorodal ¼ of turn
it arranges PREPAID: predisposition
weight: 15-35 Kg
other:
|
|
materials: in resin polyester reinforced with stratified glass fibers by hand, pigmented with gelcoats isoftalici to chromatic high resistance, I use with it of an immensest range of colors
access systems: lock to key with triangular print
lighting system: fluorescent inner lamp to low consumption 9W
|
|
materials: in resin polyester reinforced with stratified glass fibers by hand, pigmented with gelcoats isoftalici to chromatic high resistance, I use with it of an immensest range of colors
access systems: lock to key with triangular print
lighting system: fluorescent inner lamp to low consumption 9W
|
|
materials: in resin polyester reinforced with stratified glass fibers by hand, pigmented with gelcoats isoftalici to chromatic high resistance, I use with it of an immensest range of colors
access systems: lock to key with triangular print
lighting system: fluorescent inner lamp to low consumption 9W
users: n. 4 Electrical workers
n. 4 Water
|
|
|
Card Meters are one option for the marina operator to recover money for electricity consumed in 'pre-pay' rather than credit format. The reconditioned Card Meters are accessed through customer reset flaps. A card is purchased with a pre-determined value loaded onto it which, when inserted into the meter, loads that value onto the meter. The meter then counts down the pre-loaded value until it is consumed. An emergency credit value of £1.00 is available on each meter. Alterations to the tariff / emergency credit value can be made by the use of a Meterman card.
|
|
|
|
|
|
|
The new Terminal Free Time, designed and developed by Coelin with a particular focus on design and the use of ultramodern technologies, is an energy terminal that can be used in various sectors to meet the requirements of campsites, marinas and public areas in general, distributing and controlling energy services such as electricity, water, compressed air, telephone, TV, intercom, etc.
The simple and refined design combines harmoniously with the environment, becoming an integral part of the surrounding landscape.
All the functions attributed to this terminal, both as a service provider and as a device for illuminating the surrounding area (a real innovation) give this product its own special personality.
The Terminal Free Time structure, designed for heavy-duty service, is built with a double-faced one-piece casing that is shockproof and offers superior stability.
This energy terminal is manufactured with materials that offer the highest resistance against chemical and atmospheric agents, salinity and UV radiation.
Since there are no metallic parts, the terminal offers enhanced insulation and will not rust.
The Terminal Free Time can be supplied in different colours that are created during production.
|
|
|
|
|
|
|
The ESB Mini is a compact variation of the ESB Power Pedestal and is manufactured from the same high quality materials. Designed specifically for marinas requiring basic services or less obtrusive deck mounted equipment, the ESB Mini can provide power up to 32A and is supplied as standard with 15W photocell controlled lighting. The ESB mini is available in most colours and can also be supplied with L.E.D. lighting.
Metering is also available with a maximum of two metered sockets per unit and can utilise Electro-Tec Sentinel metering systems.
Materials
The pedestal outer material can be provided in any material including:
PVC Foam
Electro-Tec only supply UV stable PVC foam materials. PVC is tried and tested in environments worldwide and is available in almost any colour.
Aluminium and Plastic Composite
Composite is an incredibly durable and UV stable material. Consisting of two 0.5mm Aluminium shells thermo-bonded to a polyethylene core, composite is incredibly durable. Due to the unique properties of this material, it also acts as a great insulator by keeping electrical equipment at a constant temperature and within its operating temperatures. This material is available in almost any colour including brushed stainless effect and mirror finish.
|
|
|
The distributor model Geo consists of a structure made of SMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 standard and inalterable within a temperature range of - 40°C to +110°C. The structure is fixed on a internal carring frame made of stainless steel. All its metal components and its bolts and screw are of stainless steel.
|
|
|
|
|
|
|
HDPE CABINET - STAINLESS STEEL MODEL
Service pedestals equipped with prepaid and/or consumption metered system are activated by a transponder, that is a contactless key, programmed by the manager by means of suitable decoder. This key is handed over to the customer at his arrival.
The centralized computation, that needs connection cables to the office, and the prepaid system can coexist in the same service pedestal.
By means of a directional transponder the marina manager can visualize on the service pedestal display the consumptions of energy and water for local computation.
TECHNICAL CHARACTERISTICS
Module:Built in compliance with CE and IEC 364-7-709
Protection class: IP 67
Cabinet:HDPE UV protection (250x350x800h mm) –
Stainlees steel AISI 316 L (170x250x750h mm)
Interlocked sockets:16A to 125A
Protections:Id 30mA – Main switch
Cable connection:3P+N+E – input/output 16 mm² to 300 mm²
Water supply:½” ball valve tap
Lighting:9W low-consumption florescent lamp
Electricity meter:Progressive electricity meter. Display kW/h consumption for each socket
Water meter:Liter-counter and display of progressive metering of each output
Pre-paid system on transponder
Communication:Intercom system
Connections:IP 67 Module, TV-SAT, Telephone, Internet
|
|
MEC4
A four way card metered pedestal in black acrylic capped ABS, with a tough 'pinseal' finish to greatly increase scratch resistance. The reconditioned card meters are accessible through reset flaps. Card metered pedestals allow you to receive money upfront for electricity, a valuable asset.
|
|
UM2I/UM4I
Non-Metered Option
Two or Four Way Bollards without the metering option. The switchgear is housed beneath weatherproof polycarbonate reset flaps which have a locking facility. The standard Residual Current Device arrangement is to provide one device for a two way unit and two for a four way. Alternative options are available upon request.
|
|
Maricer have introduced a new LED lighting panel, which can be fitted onto any of their range of marine service pedestals.
The LED panels are waterproof to IPX7 and are made entirely from tough, non-corrosive UV stable materials, to compliment the lighting diffuser used in the standard pedestal range. Each panel contains the latest multi chip white LED's and offer very low power consumption at 0.2 amp each with a 30,000 hour meantime before failure. Up to four panels can be mounted on to the lighting head giving you the option of directional lighting of your choosing on your pontoon system.
|
|
MEC 2+2
A four way card metered pedestal in black acrylic capped ABS, with a tough 'pinseal' finish to greatly increase scratch resistance. The reconditioned card meters are accessible through reset flaps. Designed to be installed in conjunction with the FRS range of remote connection units, all switch gear and metering is contained within the MEC2 main pedestal.
|
|
utilities service module featuring electricity and water consumption
measurement, activated by transponder (contact-free identification system). Activation is easily attained by positioning each personalized transponder in close proximity to the service module control system.
|
|
|
compact utilities service module Featuring electricity and water consumption measurement, activated by transponder.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
|
|
Dock power pedestals
