|
|
Deck Line Pedestals
You may require an alternative to our standard pedestals and this is where the Deck Line Range comes into it's own. Low level and with directional illumination via a PL9 lamp, the main pedestal can incorporate up to four socket outlets. Manufactured from 2.0mm aluminium around a 3.0mm aluminium chassis the complete unit is then electro-statically oven baked in marine blue as shown but is also available in a variety of colours. This unit can also be utilised as a controller housing further switchgear to supply satellite connection units at adjacent berths.
|
|
The new Terminal, developed and designed by Coelin with deep care in design and using highly advanced technologies, can be used in various sectors answering to camping, touristic seaports and generic public areas requirements and carries out distribution and control of main energy services like electricity, water, air, telephone, TV, intercom, ecc...
The simple and refined design harmonizes and integrates with landscape.
All the functions attributed to Terminal, not only as energy service provider, but also as enlightening device which is an innovation, confer a special personality in styling.
|
|
BORNEO RANGE
made of TECK
IP56 enclosure
lighting (LED low power)
water in option
up to 4 electric sockets
|
|
HDPE CABINET - STAINLESS STEEL MODEL
Service pedestals equipped with prepaid and/or consumption metered system are activated by a transponder, that is a contactless key, programmed by the manager by means of suitable decoder. This key is handed over to the customer at his arrival.
The centralized computation, that needs connection cables to the office, and the prepaid system can coexist in the same service pedestal.
By means of a directional transponder the marina manager can visualize on the service pedestal display the consumptions of energy and water for local computation.
TECHNICAL CHARACTERISTICS
Module:Built in compliance with CE and IEC 364-7-709
Protection class: IP 67
Cabinet:HDPE UV protection (250x350x800h mm) –
Stainlees steel AISI 316 L (170x250x750h mm)
Interlocked sockets:16A to 125A
Protections:Id 30mA – Main switch
Cable connection:3P+N+E – input/output 16 mm² to 300 mm²
Water supply:½” ball valve tap
Lighting:9W low-consumption florescent lamp
Electricity meter:Progressive electricity meter. Display kW/h consumption for each socket
Water meter:Liter-counter and display of progressive metering of each output
Pre-paid system on transponder
Communication:Intercom system
Connections:IP 67 Module, TV-SAT, Telephone, Internet
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100
Two tone grey.
Many other colour combinations avaliable.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
Two tone grey.
Many other colour combinations avaliable.
MP800XL
|
|
Marine Technologies are proud to introduce our new pedestal…..The Sterling.
Smaller berths on marinas don’t generally require the extent of services necessary for larger berths. With this in mind, Marine Technologies has introduced a new pedestal to the market. “The Sterling” meets the needs of smaller berths perfectly and is offered without compromising quality.
• Unique slimline design makes it ideal for installing along walkways and gangways.
• Can fit up to six outlets in combination from 16A single phase to 3 phase outlets up to 32A.
• Specifically designed light for marina applications with a hinged top means no loose parts to fall into the marina when replacing lamps. Surrounding louvres direct light downwards toward the marina decking.
• The main body of the pedestal is anodised, extruded aluminium and has a slide out panel for easy access during maintenance.
Marine Technologies Sterling pedestal is a most economical solution whilst still maintaining Marine Technologies high standard of quality.
|
|
|
Smart is distributing a compact one of services with contabilizzazione of the energy and the water, activated through transponder (arranges of identification without contact).
|
|
|
S 700 L is a distributing one of services constructed in satinato steel AISI 316 L with finishes or polished. The taken ones is interbloccate electrically and automatically. The contabilizzazione system comes activated through the use of a transponder in the intelligent taken one andpower.
|
|
utilities service module featuring electricity and water consumption
measurement, activated by transponder (contact-free identification system). Activation is easily attained by positioning each personalized transponder in close proximity to the service module control system.
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
TallyKey's pedestals are made exclusively of quality materials, ensuring a long working life.
The pedestal itself is made of aluminium, while bolts, shafts and screws are in stainless steel.
If the pedestal has a lamp in the top, the "glass" is made of impact-resistant plastic.
The TallyKey T2 pedestal is thus strongly equipped to survive many years of outdoor use, even in the harsh and aggressive environment at a harbour.
A carefully thought-out detail is the special safety washers with which the base is mounted. If a pedestal is bumped or a boat departs from land and has forgotten to uncouple from the pedestal, the safety washers are broken first - the pedestal itself suffers no damage and it can be remounted immediately with new safety washers.
|
|
The fixed energy supply unit is designed to facilitate multiple, 16A,
32A and 63A low pressure connections.
It comes in the simple version (for up to 6 16A sockets) or double
version (up to 12 16A sockets), in the power dispensing version, in
the water dispensing version as well as a mixed utilities dispensing
version: power and water.
The great sturdiness of the energy dispensing column makes it ideal
to be permanently installed in public areas.
Simple version
Ground level measurements: L 470 x I 330mm
Height: 900 mm
Three parts: a base, a body module and a cast aluminium casing.
|
|
The ESB Marina Power Pedestal, in all of its variations has been designed with the intention of being the most versitile and dynamic Power Pedestal on the market.
With the capacity to accomodate most servicers the ESB is provings its thoughtful and innovative design is fulfilling the requirements of marina operators and users worldwide.
The ESB is supplied as standard with top mounted light with the option of either enegery saving lamps or up to 15 year life span L.E.D. lighting technology .
The ESB is also supplied as standard with our 4mm Composite Material. This material is incredibly durable and highly resistant to UV Fading. More Information can be found here.
|
|
The ESB Marina Power Pedestal, in all of its variations has been designed with the intention of being the most versitile and dynamic Power Pedestal on the market.
With the capacity to accomodate most servicers the ESB is provings its thoughtful and innovative design is fulfilling the requirements of marina operators and users worldwide.
The ESB is supplied as standard with top mounted light with the option of either enegery saving lamps or up to 15 year life span L.E.D. lighting technology .
The ESB is also supplied as standard with our 4mm Composite Material. This material is incredibly durable and highly resistant to UV Fading.
|
|
The ESB Marina Power Pedestal, in all of its variations has been designed with the intention of being the most versitile and dynamic Power Pedestal on the market.
With the capacity to accomodate most servicers the ESB is provings its thoughtful and innovative design is fulfilling the requirements of marina operators and users worldwide.
The ESB is supplied as standard with top mounted light with the option of either enegery saving lamps or up to 15 year life span L.E.D. lighting technology .
The ESB is also supplied as standard with our 4mm Composite Material. This material is incredibly durable and highly resistant to UV Fading.
|
|
|
The ESB Marina Power Pedestal, in all of its variations has been designed with the intention of being the most versitile and dynamic Power Pedestal on the market. With the capacity to accomodate most servicers the ESB is provings its thoughtful and innovative design is fulfilling the requirements of marina operators and users worldwide. The ESB is supplied as standard with top mounted light with the option of either enegery saving lamps or up to 15 year life span L.E.D. lighting technology .
|
|
The ESB Marina Power Pedestal, in all of its variations has been designed with the intention of being the most versitile and dynamic Power Pedestal on the market.
With the capacity to accomodate most servicers the ESB is provings its thoughtful and innovative design is fulfilling the requirements of marina operators and users worldwide.
The ESB is supplied as standard with top mounted light with the option of either enegery saving lamps or up to 15 year life span L.E.D. lighting technology .
The ESB is also supplied as standard with our 4mm Composite Material. This material is incredibly durable and highly resistant to UV Fading
|
|
The ESB Marina Power Pedestal, in all of its variations has been designed with the intention of being the most versitile and dynamic Power Pedestal on the market.
With the capacity to accomodate most servicers the ESB is provings its thoughtful and innovative design is fulfilling the requirements of marina operators and users worldwide.
The ESB is supplied as standard with top mounted light with the option of either enegery saving lamps or up to 15 year life span L.E.D. lighting technology .
The ESB is also supplied as standard with our 4mm Composite Material. This material is incredibly durable and highly resistant to UV Fading.
|
|
|
The distributor model Geo consists of a structure made of SMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 standard and inalterable within a temperature range of - 40°C to +110°C. The structure is fixed on a internal carring frame made of stainless steel. All its metal components and its bolts and screw are of stainless steel.
|
|
|
The distributor model "Domyna" consists of a removable external body and of an instrument-holder head made of SMC and BMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of - 40°C to +110°C. Safeguarded against UV rays and early ageing. The body is fixed on a internal carring frame made of stainless steel. This distributor is equipped with a fixed panel on the side "B" and a shockproof polycarbonate injection molded door on the side "A" , V2 Class selfextinguishing, 4.5 mm thickness, in compliance with UL94 Standard, provided with treatment against UV rays and with injected foamed polyurethane seals. The door are opened by pulling upwards and closed by lock and key. All its metal components and its bolts and screws are of stainless steel.
|
|
- Electricity link bollard made of polyester. It contains a prop, within which there is the entire plumbing system. It further contains a locker with the small doors, which contains the entire wiring, and a roof, within which there is lighting.
- The usage of the bollard entails both water and power supply in the motor camps and the seascapes.
- Maximum vertical cut of the electrical cable is 4x35 square milimeters.
|
|
Electricity link bollard made of inox.
- Bollard's size specifications are the following: 400x280x1050 milimeters.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such.
- Maximum vertical cut of the electrical cable is 4x70 square milimeters.
|
|
Compact, durable and economical
Painted galvanized steel
Pedestal or surface mount units
Pedestal available with loop-feed lugs
Metered or unmetered
UL listed
|
|
|
|
Dock pedestals : Power and water distribution
