|
|
|
Higher stainless 316L equipped with exceptional mechanical properties. Great resistance to the salt sprays.
|
|
Truly the flagship of our unitized pedestal line, the Admiral SS possesses amperage capabilities up to 500 Amps and voltages of 480/277Three Phase, 120/240 Single Phase and combinations of these receptacles all in one unit to serve nearly any size MegaYacht.
Standard Features:
Heavy Stainless Steel Housing that is Powder Coated with a Polyester Resin and Over-coated with a Heavy Clear Coat
Hardwire Capability for any One Voltage
Four 100A Receptacles of any Two Voltage Combinations such as 277/480 Three Phase, 120/208 Three Phase, or 120/240 Single Phase
When the 100A 120/240V Receptacles are Used, Two 50 Amp 120/240V Receptacles can also be Provided for a Total of 500 Amps
Photocell Controlled 13 Watt Fluorescent Light with Clear Lens that Provides 360 Degrees of Lighting
Backlit Faceplate For Easy Receptacle Plug-in at Night
|
|
The Hatteras Light and the Lighthouse use the same light assembly, providing a 360 degree light pattern. This light pattern is important in a marina because it lights both the dock and finger piers, yet does not shine in the boats because it's directed downward. Best of all, the bulb will last about 3 years and costs about 30 cents per month to operate.
The Hatteras Light is just 30" tall, and can be equipped with two 20 amp GFI or two 30 or 50 amp marine receptacles or a combination of 20, 30, and 50 amp receptacles. Introduced in 1993 and with thousands in service, this popular unit offers a low cost alternative to the Lighthouse for smaller boat applications. The attractive Hatteras Light will welcome your guest in style. They're great not only for marinas, but also for your dock, pool, lawn and deck area. To guarantee durability, the Hatteras has also been tested by Underwriters Laboratories.
Main Features include:
Photocell controlled 13 watt fluorescent light provides 360 degree lighting
20 amp GFI duplex receptacle and thermal magnetic circuit breaker
30 amp 125v marine twist lock receptacle and thermal magnetic circuit breaker
50 amp 125/250v marine twist lock receptacle and thermal magnetic circuit breaker
Hose bib and adapter/cable brackets
Tough thermoplastic housing with two-part polyurethane paint with UV inhibitor
Rated up to 100 amps with loopfeed copper bus bars
7.5" square mounting base and a maximum diameter of 13.5" around top of pedestal
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
TV/phone connections with weatherproof cover
|
|
For the longest lasting marine power pedestals, nothing is better or will last longer in the marine environment than our new stainless steel housing. We have worked more than two years to design a stainless steel pedestal that would meet all the codes and marine requirements, yet be easy to install and most importantly be maintenance free and user friendly.
Main Features include:
Available with Lockable doors that fully close
Photocell controlled 13 watt fluorescent light provides 360 degree lighting availabe in in clear or amber lenses
Corrosion resistant fine stranded tin plated copper wire for flexibility
Hose and cable brackets and 3/4 inch hose bibs with stainless steel handles
Maintenance free stainless steel housing with Lifetime Warrant
Rated 250 to 500 amps with copper bussing which allows for 20, 30, 50 amp receptacles
Electronically metered for direct or computer readouts
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Dual water hook-ups and TV/phone connections
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
Main Features include:
Receptacles surface-mounted at top of unit for easy replacement and meet NFPA 303 3-14.1c's required 24" above the dock when mounted on a 30" dock box
30/50/20 amp receptacles available
Downward indirect lighting
Loopfeed copper bus bars
Easy-mounting brackets for piling, dock box, pedestal, or covered dock uprights
Phone & cable TV outlets available
Thermoplastic housing with lifetime warranty
Door hinge not pop riveted
Housing completely non-conductive
Galvanized, stainless, or aluminum pedestals available
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Water available with pedestals
|
|
|
The new line of services distribution Jolly Magnum has been designed to offer a strong and harmonic product for all those situations where safety and aesthetics have to coexist in the respect of the regulations in force. These distribution boards for outside are realized with materials of great resistance to corrosion and painted with polyester powder coating to maintain their characteristics for a long time.
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
PHOCEA RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
CALYPSO RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
CORALIA RANGE
structure made of polyester armed fiberglass and marine steanless steel (316L)
IP55 enclosure
differential breaker 30mA
integrated lighting
energy control in option
large choice of colour in option
electric socket single-phase or 3-phases
up to 125A
|
|
Golden Oak Pedestals
Enhance the look of your pontoon with our 'wood effect' pedestals. The options shown here are a two way pedestal with electric and water outlets and a Pontoon Light. Manufactured from 5.0mm Fomalux with a foil laminated finish, the process involves the same procedure as used by many conservatory, replacement window and door manufacturers when making their product. The finish is therefore very resilient and well tested, ensuring longevity. All sizes of pedestal and levels of equipment can be offered in this finish.
|
|
|
Marine Technologies unveiled their newest range of marine pedestals named “The Platinum” at the 2008 Sanctuary Cove Boat Show , The Platinum pedestals were designed to meet the ever increasing requirements for more and more services within the pedestals to provide for the needs of larger vessels. It is able to accommodate power outlets from 15 Amp to 250 Amp, and 400 Amp direct connection for Mega Yachts. It’s robust and modern design will enhance any marina , whilst still maintaining the high standard of quality and style that Marine Technologies is renowned for.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100XL
Containing 3Phase - 63A Socket Outlets, together with single phase, TV, Phone, water tap and electronic kWh metering.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100XL
Containing 3Phase - 63A Socket Outlets, together with single phase, TV, Phone, water tap and electronic kWh metering.
Stainless Steel - Aluminium.The ultimate pedestal for strength and quality.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
Containing 3Phase - 200/250A Socket Outlet, RCD protection. This pedestal is suitable for Mega Yacht berths, and can be fitted with outlets to 400A.
|
|
|
S 700 L is a distributing one of services constructed in satinato steel AISI 316 L with finishes or polished. The taken ones is interbloccate electrically and automatically. The contabilizzazione system comes activated through the use of a transponder in the intelligent taken one andpower.
|
|
The fixed energy supply unit is designed to facilitate multiple, 16A,
32A and 63A low pressure connections.
It comes in the simple version (for up to 6 16A sockets) or double
version (up to 12 16A sockets), in the power dispensing version, in
the water dispensing version as well as a mixed utilities dispensing
version: power and water.
The great sturdiness of the energy dispensing column makes it ideal
to be permanently installed in public areas.
Simple version
Ground level measurements: L 470 x I 330mm
Height: 900 mm
Three parts: a base, a body module and a cast aluminium casing.
|
|
|
The four models of service bollards LUCCIOLA, ETRUSCA, DANNY and MAYA are made of high quality fibreglass, ensuring sturdiness, longlife and resistance to UV rays. The use of special gelcoats having a very high chromatic resistance prevents any change of the colour, even after several years under the sun rays and in the salty environment of the sea.
|
|
Additional accessories (light columns, cleats, fire posts)
Additional accessories make a stay in the marina as convenient and safe as possible. Available items include:
* Light columns with water supply taps and electricity sockets illuminate the moorings
at night and provide water and electricity for the berthed boats
* Cleats and fenders for yachts and motor boats enable mooring of mixed boats
* Fire safety posts guarantee fire safety of the boats during their stay in the marina
* Wooden decking, gangways, ladders, foot bridge rails made of larch are low cost,
durable and economical
|
|
|
The distributor model Mistral consist of a structure made of stainless steel and a top made of SMC strengthened thermosetting material painted with RAL color on request.
|
|
|
The distributor model Aquarius consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. This distributor is equipped with a fixed panel on the side "B" ana a shockproof polycarbonate injection molded door on the side "A", V2 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and provided with treatment against UV rays.The door are opened by pulling upwards and closed by lock and key.All its metal components and its bolts and screws are of stainless steel.
|
|
|
The distributor model Aquarius consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. This distributor is equipped with shockproof polycarbonate injection molded doors, V2 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and provided with treatment against UV rays.The doors are opened by pulling upwards and closed by lock and key.All its metal components and its bolts and screws are of stainless steel.
|
|
|
The distributor model Minus consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. All its metal components and its bolts and screws are of stainless steel.Distributor according to the EN60439 standard
|
|
- Electricity link bollard made of inox A4(316) class with a front panel and a roof made of polyester.
- Bollard's size specifications are the following: 200x200x100 milimeters.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such. The bollard is equipped according to a certain request. Maximum vertical cut of the electrical cable is 4x35 square milimeters.
- The bollard is to be painted using the electrostatic procedure in RAL-color in accordance with request.
|
|
- The cabinet is made of A4 (316) stainless steel sheets.
- Cabinet size is 200x140x700mm. The cabinet protection rate is IP56. The cabinet can be repainted by electrostatic painting technique, dried at high temperature, colour on customer request.
- The size and weight of the cabinet is especially suitable for marinas with floating pontoon and camps, where it is important that the cabinet takes as less space as possible.
- The cabinet contains:
- 4 electricity socket
- 2 water faucet The cabinet should be attached by 4 stainless steel screws to a levelled surface.
- The electric cable and the water pipes are attached through the bottom of the cabinet. The internal illumination is located in the cabinet roof, it makes the access to the connections easier, there is also an orientation light available.
- There is a maintenance window on the front of the cabinet.
|
|
The first two segments are separated with a bulkhead, to prevent water penetration from the lower anterior area, which holds the entire plumbing.
Due to safety reasons, lower and middle segment (1040 mm) are equipped with a vertical bulkhead, which separates the posterior area, holding the entire electric installation, from the anterior area, holding the plumbing (lower segment) and user equipment (connectors, programmable key socket, keyboard and LCD).
The level of mechanical protection of the cabinet is IP56.
The entire cabinet, or its constituent segments, can additionally be panted through electrostatic spraying procedure accompanied by high temperature torrefaction, and all according to buyer’s preferences and requests.
|
|
- Electricity link bollard made of inox A4(316) class.
- Bollard's size specifications are the following: 400x250x900 milimeters.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such.
- Maximum vertical cut of the electrical cable is 4x70 square milimeters.
- The bollard is to be painted using the electrostatic procedure in RAL-color in accordance with request.
|
|
THE M-TECH SERVICE PEDISTAL
Finally there is a service pedestal which matches the need of the boat owneran marina operator
The boat owner requires safe and convenient power, water and lighting - perhaps even a TV and telephone or modem hook-up. Of course the marina operator needs these features too, but in addition looks for durability, ease of maintenance and cost effectiveness.
|
|
|
|
Dock pedestals : Power and water distribution
