|
|
If you have transient boat slips, Eaton Corporation-Marina Power and Lighting has developed their newest product for your situation.
The new "Smart Start" pedestal is activated by the swipe of a credit card. A kiosk will be centrally located at the marina and will control up to 32 power pedestals. When a boater wants to use a slip, they will enter the slip number and amount of time they would like and will then be asked to swipe a card in order to activate the pedestal. Once the chosen time is up, the pedestal will shut down. No more free power!
The "Smart Start" pedestal will not only prevent transient boaters from stealing power, but it will also eliminate the need for 24 hour monitoring of the slips. Boaters will be able to come in at any time of the day and activate a pedestal.
|
|
|
Card Meters are one option for the marina operator to recover money for electricity consumed in 'pre-pay' rather than credit format. The reconditioned Card Meters are accessed through customer reset flaps. A card is purchased with a pre-determined value loaded onto it which, when inserted into the meter, loads that value onto the meter. The meter then counts down the pre-loaded value until it is consumed. An emergency credit value of £1.00 is available on each meter. Alterations to the tariff / emergency credit value can be made by the use of a Meterman card.
|
|
|
|
|
|
|
The new Terminal Free Time, designed and developed by Coelin with a particular focus on design and the use of ultramodern technologies, is an energy terminal that can be used in various sectors to meet the requirements of campsites, marinas and public areas in general, distributing and controlling energy services such as electricity, water, compressed air, telephone, TV, intercom, etc.
The simple and refined design combines harmoniously with the environment, becoming an integral part of the surrounding landscape.
All the functions attributed to this terminal, both as a service provider and as a device for illuminating the surrounding area (a real innovation) give this product its own special personality.
The Terminal Free Time structure, designed for heavy-duty service, is built with a double-faced one-piece casing that is shockproof and offers superior stability.
This energy terminal is manufactured with materials that offer the highest resistance against chemical and atmospheric agents, salinity and UV radiation.
Since there are no metallic parts, the terminal offers enhanced insulation and will not rust.
The Terminal Free Time can be supplied in different colours that are created during production.
|
|
|
|
|
|
|
The ESB Mini is a compact variation of the ESB Power Pedestal and is manufactured from the same high quality materials. Designed specifically for marinas requiring basic services or less obtrusive deck mounted equipment, the ESB Mini can provide power up to 32A and is supplied as standard with 15W photocell controlled lighting. The ESB mini is available in most colours and can also be supplied with L.E.D. lighting.
Metering is also available with a maximum of two metered sockets per unit and can utilise Electro-Tec Sentinel metering systems.
Materials
The pedestal outer material can be provided in any material including:
PVC Foam
Electro-Tec only supply UV stable PVC foam materials. PVC is tried and tested in environments worldwide and is available in almost any colour.
Aluminium and Plastic Composite
Composite is an incredibly durable and UV stable material. Consisting of two 0.5mm Aluminium shells thermo-bonded to a polyethylene core, composite is incredibly durable. Due to the unique properties of this material, it also acts as a great insulator by keeping electrical equipment at a constant temperature and within its operating temperatures. This material is available in almost any colour including brushed stainless effect and mirror finish.
|
|
The distributor model Geo consists of a structure made of SMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 standard and inalterable within a temperature range of - 40°C to +110°C. The structure is fixed on a internal carring frame made of stainless steel. All its metal components and its bolts and screw are of stainless steel.
IMQ IP56 STRUCTURE UP TO THE EN62208
|
|
|
Module Built in compliance with CE and IEC 364-7-709 standards. Protection class IP 67. Material HDPE UV protection. Dimensions 250x350x800h mm. Interlocked sockets 16A to 125A. Protections Id 30mA - Main switch. Cable connection 3P+N T - input/output 16 mm to 300 mm. Water supply ½%u201D ball valve tap . Lighting 9W 240 VCA low-consumption florescent lamp . Fittings for computation of consumptions / links / communication: Electricity meter Progressive electricity meter. Display kW/h consumption for each socket Water meter Liter-counter and display of progressive metering of each output Pre-paid system Pre-paid on transponder Communication Intercom system Connections TV-SAT, Telephone, Internet
|
|
UM2I/UM4I
Non-Metered Option
Two or Four Way Bollards without the metering option. The switchgear is housed beneath weatherproof polycarbonate reset flaps which have a locking facility. The standard Residual Current Device arrangement is to provide one device for a two way unit and two for a four way. Alternative options are available upon request.
|
|
|
compact utilities service module Featuring electricity and water consumption measurement, activated by transponder.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
utilities service module featuring electricity and water consumption
measurement, activated by transponder (contact-free identification system). Activation is easily attained by positioning each personalized transponder in close proximity to the service module control system.
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
|
|
|
|
|
Quality in every detail
TallyKey's pedestals are made exclusively of quality materials, ensuring a long working life.
The pedestal itself is made of aluminium, while bolts, shafts and screws are in stainless steel.
If the pedestal has a lamp in the top, the "glass" is made of impact-resistant plastic.
The TallyKey T2 pedestal is thus strongly equipped to survive many years of outdoor use, even in the harsh and aggressive environment at a harbour.
A carefully thought-out detail is the special safety washers with which the base is mounted. If a pedestal is bumped or a boat departs from land and has forgotten to uncouple from the pedestal, the safety washers are broken first - the pedestal itself suffers no damage and it can be remounted immediately with new safety washers.
Flexible and rational production
TallyKey pedestals are not mass produced, but made to customer specifications for every installation. The construction itself was nevertheless developed for rational mass production and it therefore offers the market's best combination of quality, durability and price.
The slender design speaks for itself and actively contributes to guests' positive impression of your harbour or camping site.
The T2 pedestal is available in two heights: 83 and 113 cm (with lamp: + 17 cm).
The higher pedestal was specially developed for camping sites, where it complies with European standards which require, among other things, 80 cm from the ground to the bottom power socket.
|
|
users: n. 4 Electrical workers
n. 4 Water
taken electrical workers: 16A 230V Interboloccate IP66 anticorrosion treatment
protections: n. 4 magnetotermici switches to protection of taken of electric power;
n. 1 magnetotermico switch to protection of the lighting system system;
n. 1 general switch differentiates them, to protection of the system Motive power, with threshold of participation to 0,03A;
|
|
materials:
in polyester resin reinforced with stratified glass fibers by hand, pigmented with gelcoats isoftalici to chromatic high resistance, I use with it of an immensest range of colors
access systems:
lock to key with triangular print
|
|
|
The Roline range has been developed to provide both electricity and water services in a compact low-level unit. Manufactured in aluminium powder coated to a colour of your choice, the Roline range offers a simple but effective marina services solution.
|
|
ELECTRICAL EQUIPMENT (MH6 & MH9)
Whilst Walcon does not manufacture marina electrical equipment. We have ensured that suitable units will fit our equipment. The modules illustrated (MH6) are manufactured by Sureline Electrical Modules Limited & Rolec Services Limited (Alternative types of equipment available from other manufacturers). The units incorporate walkway light, Miniature Circuit Breakers and Earth Leakage Circuit Breakers for both sockets mounted on the casing or remotely fixed. Various specifications for the rating and number of sockets are available. A remote socket outlet type MH9 can be supplied for use with the main control module.
|
|
Maricer have introduced a new LED lighting panel, which can be fitted onto any of their range of marine service pedestals.
The LED panels are waterproof to IPX7 and are made entirely from tough, non-corrosive UV stable materials, to compliment the lighting diffuser used in the standard pedestal range. Each panel contains the latest multi chip white LED's and offer very low power consumption at 0.2 amp each with a 30,000 hour meantime before failure. Up to four panels can be mounted on to the lighting head giving you the option of directional lighting of your choosing on your pontoon system.
|
|
Aquarius has a structure suitable for marine environments, highly resistant to UV rays, accidental impacts and weathering, consisting of hot flow cast, pressure moulded elements made from SMC and BMC reinforced thermosetting material. The structure is self-extinguishing and belongs to the V0 class with 4.5 mm thickness according to the UL94 standard, unalterable up to temperatures comprised between – 40°C and + 110°C. All the components are fixed with stainless steel nuts and bolts. Aquarius has protective guards for the outlets and switches made from injection-moulded polycarbonate, shock-proof and self-extinguishing, belonging to class V2 with 4.5 mm thickness according to the UL94 standard, with anti-UV ray protective treatment and injected foam polyurethane seals. The doors open upwards and are lockable with keys.
IMQ IP44/66 STRUCTURE COMPLIANT WITH THE CEI EN 62208 STANDARD
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
|
One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized for its practicality and exceptional durability.
|
|
Cost effective solution for marina equiped with less than 60 berths
Install stand alone system with badges (or tokens) to control the access to the sockets and the taps of your bollards
- Your yachtmen are equiped with a specifcic access badge to bollards
- The badge contains consumption units prepaid or real energy units
- When the badge is empty, the user can reload it near you or on a terminal
- contact us for more informations (prepaid, real consumption, centralized payment and management)
|
|
DM2I/DM4I Metered Option
Two or Four Way Bollards with the metering option. A range of meters can be supplied from the 100A rated Ofgem Approved meter primarily used in the two way unit to the din rail mounted single module 32A rated version utilised in the four way unit. Computerised metering and energy control can also be provided and an alternative brochure covering this option is available upon request. Illumination is provided by means of 2D 16 control gear and lamp along with a 6A Single Pole MCB and P12R Photocell.
|
|
|
This compact metered module is designed for use with the UM/DM/MEC range of bollards to offer a remote metering facility. The control devices for the RD2 are contained in the master supply bollard (UM, DM or MEC) and cable from that will supply the sockets on the RD2. This unit would generally be sited opposite the master unit.
|
|
MEC 2+2
A four way card metered pedestal in black acrylic capped ABS, with a tough 'pinseal' finish to greatly increase scratch resistance. The reconditioned card meters are accessible through reset flaps. Designed to be installed in conjunction with the FRS range of remote connection units, all switch gear and metering is contained within the MEC2 main pedestal.
|
|
Stainless Steel Pedestals
Manufactured from 1.0mm 316 Grade Stainless Steel, this pedestal range incorporates all the benefits of our PVC internal chassis and base plate with a tough stainless steel skin suitable for marine environments. All the usual configurations are available including water, TV and three phase options. The product can also be offered in 304 Grade Stainless Steel for less harsh environments.
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
|
|
Dock multifunction pedestals
