|
|
Ecoglop, a real «go anywhere cleaner», is particularly adapted
to the cleaning of marinas, lakes, canals...
Its small size and its integrated wheels facilitate its launching.
It collects up floating solid waste, even in diffi cult-to-get-at areas :
- Solid floating waste (wood, plastics, polystyrene, algae...) is collected in a pivoting basket which is automatically emptied into an on board container.
- liquid floating waste (oils and hydrocarbons) are stored fl oating in a separator tank.
|
|
Genuine «vacuum cleaner of the sea», Cataglop is especially
dedicated to collecting floating solid and liquid waste.
It combines robustness and simplicity ; it is also a multi-purpose
boat.
It collects fl oating solid waste, even in difficult to get at areas
- Solid fl oating waste (wood, plastics, polystyrene, algae...) is collected in a pivoting basket which is automatically emptied into an on board container.
- liquid floating waste (oils and hydrocarbons) are stored floating in a separator tank.
|
|
Cataglop XL is the latest edition of the range. It has been specially
designed to collect up marcro-waste and floating hydrocarbons in costal
areas up to 5 nautical miles from the shore, near beaches, rocky areas,
cliffs, etc...
It has a cruising speed of 5,5 knots.
It collects floating solid waste, even in diffi cult-to-get-at areas:
- Solid floating waste (wood, plastics, polystyrene, algae...) is collected in a pivoting basket which is automatically empted into an ondeck container.
- liquid floating waste (oils and hydrocarbons) is stored in a separator tank.
|
|
CATAMAR is an oil pollution recovery vessel, used in the event of serious pollution created for example after sinking, a collision on sea or oil slick created by illegal tanker degasifications.
CATAMAR is able to work effectively up to Beaufort Force 4 with a continuous hydrocarbons absorption capacity of 100m3/hour.
In the event of very serious high volume pollution, oils and the hydrocarbons are transferred to a floating flexible tank towed by CATAMAR.
Adapting to the thickness of the oil slick, and with its floating booms deployed to a 10 m width, CATAMAR can clean, in one hour, a surface area of more than two hectares.
|
|
|
Seatec Marine Technologies Srl, in partnership with Fasam Srl, designes and produces treatment units for rain water treatment and for careenage water treatment. The units, suitable both for installation above ground or inside a prefabricated concrete basin in the ground, guarantee performances in full compliance with European standards ensuring the possibility of discharging treated waters in the sea or in sewage. The effectiveness of the treatment provides also the possibility of riutilization of treated waters for other careening operations reducing water consumption and relevant costs.
|
|
OIL RECUPERATORS
*totalement conceived out of stainless steel 316 L
*contenance of approximately 900 liters
*système receptacle of the cans of oil worn and oil filter
*écoulement direct in the tank
*niveau of visible filling of outside
*construction extrèmement robust
*équipements guaranteed 5 years within the framework of a normal use
|
|
As a world leader in technical coated fabrics, Pennel & Flipo is constantly innovating and has recently launched a revolutionary pre-made rubber boom.
This innovation allows boom manufacturers, who are not equipped with rubber vulcanizing equipment, to compete in the high-end market of heavy-duty booms.
This 2-ply fabric is calendered in a way that includes pre-made chambers or channels that can be inflated or used as a ballast sleeve.
Pennel & Flipo offers several standard designs and can also accommodate your custom requirements in dimensions, coating gauge and colour.
|
|
Pennel & Flipo has developed a range of “open weave” PU fabrics, a process that encapsulates the threads and allows for the bonding of both sides of the coating. This design provides outstanding adhesion levels and is recommended where high “peel” strength is required such as in welded closures of the inflatable sections of oil booms.
We offer a wide selection of weaves to match your tensile specifications, from 225 lbs/inch - 200 daN/5cm tensile strength and higher. Coatings can be balanced or unbalanced and gauges adjusted to your specific requirements, from 20 to 45 oz./yd² - 650 to 1500 g/m². Various colours are available.
|
|
At Pennel & Flipo, we have developed a very strong composite of PU and double-ply polyester to be used as permanent boom.
You can achieve easier deployment given the increased suppleness of our formulation.
Also, most competitors’ fabrics are press-coated, a process that allows threads to move to the surface of the coating, permitting water and pollutants to infiltrate, thereby reducing the abrasion resistance and the mechanical properties down the road.
Our process consists of laminating films of PU on 2 layers of weave, a process that ensures increased longevity. Given that the middle layer of the PU is protected by 2 weaves, it maintains its’ original properties over a much longer period of time.
We formulated a high end virgin Polyether PU, not blended, ensuring up to 3 times the abrasion resistance of competitive products. This heavy double-ply composite is not thermo-set, thereby allowing the welding of seams and accessories.
|
|
|
Resinex is specialist in permanent barriers: OSP. In this field, dimensions and materials utilizzed are coherent with the long life of the system. Floats, often of big size, are normally produced in roto-moulded polyethylene filled with polyurethane foam. The draught is usually manufactured with rubber or polyurethane fabric. Often, nets are utilizzed to maximize the anti-intrusion function.
|
|
|
Absorbs ail, transmission fluid and fuel tram engine pan so it can't get into the bilge . Holds up to 3 quarts of ail . Can be wrung out and reused . Can be removed easily without dirtying hands . Helps protect the environment
|
|
| ... products without information |
| |
|
|
Pollution control equipment
