|
|
The PerfectLine® Family of Fiberglass Products offers quality craftmanship and durability. From the low profile "20 Series" Boxes to the high capacity "50 Series" Boxes, everything from paint cans to fishing poles can be safely stored and secured. Strong enough to sit on and easily secured to any surface, the PerfectLine Family® of Dock Boxes are so finely built that they are often found on the foredeck and cockpits of luxury yachts.
FEATURES
• Flat lids are constructed with foam core for strength and will accommodate seating.
• Continuous heavy duty aluminum hinges attached with heavy duty rivets.
• Optional stainless steel piano hinge, machine screws, and lock nuts.
• All resins and gelcoats are pure, marine grade isophtalics — no fillers are ever used.
• Stainless steel locking hasp and stainless steel lid retainer cable.
• Off-white interior gelcoat.
• UV gelcoat for long lasting protection and appearance.
• Molded-in non-skid surface on flat lids.
|
|
SIMILTECK STAVES Since 1994 Martini Marinas produces Similteck staves, a special polypropylene resin, using the technology of injection moulding.Beside being a solution against the tropical deforestation, in compliance with the ISO 9004:2000 regulation that recommends the analysis of the impact of the product on the natural resources, the Similteck staves by Martini Marinas offers numerous advantages:
- Absolute absence of splinters - No metallic screws. - Radiating section. The Similteck staves are injection moulded and have a radiating section that dissipates the accumulated heat under the solar radiation, whilst others extruded plastic staves available on the market have full section, and become very hot when exposed to the sun in the summery months. - Non-slip and antimycotic surface - Elastic and silent walking - Maintenance free
|
|
|
Two-piece chaseway attaches to side of dock sections, allowing conduit for utilities. Available in 60" or 20" wide sections, and with stainless-steel hardware option.
|
|
RAIL
Consisting of 2 textile zapes 10 mm diameter, one stainless-steel cable 5 mm diameter, screw and couplings for fixation to the pontoon.
|
|
The Mariner is a lighted bollard that can stand from 11 inches to 96 inches tall and can be used in various applications from marina docks, to landscaped areas, around pools, golf courses, parking lots and beyond. The housing is made of engineered resin to withstand the harsh marine and land environments form Alaska to the tropics. The mariner became available in May 2007 and comes with a lifetime warranty.
Product Specifications:
Can be configured with a 5 Watt, 7 Watt or 13 Watt Fluorescent Bulb
Can be mounted to a 4 inch. PVC Pipe to get the desired height
We can supply the mounting base and painted pole for any desired height
Lifetime Warranty on the engineered resin housing
Patent Pending
UL Listing Pending
|
|
|
This stainless steel cleat fits neatly in between dock timbers and twists 90 degrees to lock in place.
|
|
NEREIDE
The pride of our products: these are suitably equipped to provide protection for two ENEA boats moored along side a concrete pontoon completely exposed in the open Antarctic sea, which makes them more than perfect for pleasure crafts
It compensates for jerks to ropes and bollards avoiding all damages caused from the rough motion of the waves.
Simple to install, all that you need is two knots. You do not need to cut the line
It is made from a UV resistant marine grade material, which guarantees great elastic quality.
|
|
The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view.
Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip.
|
|
Mooring Whips are a unique and proven way to prevent damage to your boat and dock.
With Mooring Whips, your boat simply can't hit the dock.
The specially designed, heavy duty, solid fiberglass rods, mounted in super strong ALMAG 35 aluminum bases, pull your boat away from the dock by applying continuous variable pressure between your boat and dock, while spring lines keep your boat from moving out of position. CLICK HERE FOR PICS
Mooring Whips give you moor protection for your boat and make docking and mooring easy, convenient and safe.
The Ultimate is equipped with a rocker arm base which pulls the whip up and out of the way when not in use. The Ultimate is designed for sailboats, large yachts, fishing boats rigged with towers and pontoon boats.
|
|
Mooring Whips are a unique and proven way to prevent damage to your boat and dock.
With Mooring Whips, your boat simply can't hit the dock.
The specially designed, heavy duty, solid fiberglass rods, mounted in super strong ALMAG 35 aluminum bases, pull your boat away from the dock by applying continuous variable pressure between your boat and dock, while spring lines keep your boat from moving out of position.
The Deluxe is equipped with a fixed angle base and is intended for use with runabouts, center consoles, ski and bass boats.
At Mooring Products International, we have a product for every size, weight and style of boat.
|
|
These solar lights are mounted on top of a sturdy steel base, housed inside an attractive,Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes.
Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries.
|
|
HEAD BLINKER
The head blinker is installed at the pier head to signal its presence.
The lamp, RINA homologation, is placed at 2,5 m elevation from the deck, on the top of a hot dip galvanised steel support, aesthetically pleasant and well integrated in the overall plant. Electronic flickering and dusk switch can be provided upon request.
|
|
MPL/MPM - Pontoon Light & Pontoon Marker
Pontoon illumination and identification can be provided by means of this bollard. The units incorporate a 6A MCB and P12R photocell controlling 2D16 lamp control gear located within a 3mm opal polycarbonate diffuser.
|
|
Liteway Lighting Post
Install lighting around your marina with this low cost post and illuminated globe. This unit is available in both 304 and 316 Grades of Stainless Steel. The diameter of the post is 60mm and heights of either 1000mm or 1500mm are available. A 12W low consumption lamp is supplied and the post is designed to be root mounted but base flange versions are available upon request. As an even lower cost alternative, a fibreglass root mounted post can be supplied.
|
|
|
From the standard 360 degree low glare option to the modern looking quad head, we are confident we have a light for every occasion. Our solar powered marker lights are ideal for marking out hazardous edges and areas along quaysides, access bridges, pontoons, mooring fingers, footpaths, road ramps, etc. Illuminated pier identification bollards and access bridge lights are included in our extensive range of lighting products.
|
|
During the day the solar panel collects the sun's energy and charges the batteries. At nightfall, Solar Dock Lite's sensor automatically turns on the super bright LED. With multiple units your dock will provide an elegantly lit pathway for all to walk on. This unit is hands free and energy efficient! Lasts 18 hours on a full charge and is brighter than conventional solar garden lights! Just place it on your dock post and you are ready to go!
Your dock was an expensive investment and we encourage you to protect it from unwanted boating collisions. Lining your dock with Dock Lites isn't just for looks. It adds safety as well. Ask your insurance company about discounts on your umbrella insurance for protecting your dock with Dock Lites™!
|
|
|
Deadweight insert and cable winch added to our polyethylene pipe bracket allows easy dock adjustment for water fluctuations. Cable sold separately.
|
|
Marina Power and Lighting and RV Park Hookups offer Eaton's Cutler-Hammer distribution panels as stand alone units or in one of our substations. All of our busses are made of copper and our breakers are the bolt-on type. Distribution panels can be 120/240V single-phase or 120/208V three-phase based on your system requirements. Distribution panels can also have a main breaker or a main lug. Branch circuit breakers are provided based on customer requirements.
Double walled, Stainless Steel Housing with Polyester Powder Coating with a lifetime warranty
Temperature Controlled Cooling Fans
Copper Wound single and three phase transformer from 50KVA to 330KVA. It is double dipped in tough insulating varnish to protect the copper, an reduse noise.Then coated in high temperature epoxy to protect against the severe saltwater environment.
Distribution Panel can handle up to 1200 AMP Main Circuit Breaker with (16) 120/240V Single-Phase or (11) 120/208V Three-Phase Branch Bolt-on Circuit Breakers connecting to a copper bus.
|
|
Terminal Car is a traffic bollard completely laid underground. If necessary, it can be extracted and repositioned in its seat, thus making the area completely free and practicable.
Traffic bollards are used to regulate motor vehicles when either moving or
stopping. They are particularly suitable for historic city centres, squares, residential areas, commercial centres, etc.
Extraction occurs completely automatically by means of a microprocessor-based electronic central unit controlling an electric motor. This is offering the advantage that a traffic bollard can continue to work even in case of a power failure.
The hot-galvanised FE 510 massive structure can provide for excellent resistance to corrosion.
The floor surface is made up of a nodular cast iron ring having a 250 KN capacity and therefore also fit for heavy motor vehicles.
The traffic bollard is complete with high-luminosity blinking leds as well as with a reflex reflector providing for excellent visibility. An acoustic signal completes the system of signals.
|
|
The AUTOMATIC BOLLARD type is operated by air compressed.
Proper for public roads, residential or commercial areas, parking lots and pedestrian access.
Engineered for simple installation, fast service and easy relocation, the Jolly Stop bollard could be used with any type of control system available on the market as remote controls, badge or proximity cards, manual or electronic keys and so on.
|
|
The RETRACTABLEC BOLLARD type JS12M is manually lifted in upward position and could be
locked in opened or closed position by a key-block.
Proper to control access to private areas and to stop access for long periods.
|
|
A shore power connection is your ticket to a comfortable and smooth onboard experience in most harbours.
Fixed alternating current (AC) is the power source to run appliances and to charge the batteries. Mastervolt offers you everything you need for a high-quality shore connection, with safety, security and performance at the top of the list.
|
|
The new MP16 Shore Power system from Ratio Electric has been designed
to hook-up your boat quick and easy. Based on the world standard for outdoor connections (the IEC 60309) this system offers a reliable and approved shore power connection. 1) The corrosion resistant stainless steel Power Inlet 2) adds to the finishing touch of every boat. Easy locking waterproof cap.
|
|
|
|
Other dock equipment
