Products > Inflatable boat > Inflatable boat : power catamaran

Inflatable boats : power catamarans

19 Products (boat or nautical equipment) | 7 Companies

Power catamaran : foldable inflatable boat (outboard) ASIS XTM Racing 4.2 ASIS BOATS

4.1m

13' 5"ft

The XTM beats any other Fully Inflatable racing boat in performance, robustness and stability.

It has a unique tunnel shaped ...

Power catamaran : rigid inflatable boat (outboard, twin engine, center console, T-Top) 28 CATAMARAN Nautica Ribs

8.53m

28' 0"ft

Ranging in size 17' to 28', the Catamaran ...

Power catamaran : rigid inflatable boat (in-board, center console) 24 CATAMARAN IO Nautica Ribs

7.14m

23' 5"ft

Ranging in size 17' to 28', the Catamaran ...

Power catamaran : rigid inflatable boat (outboard, twin engine, center console, T-Top) 24 CATAMARAN Nautica Ribs

7.14m

23' 5"ft

Ranging in size 17' to 28', the Catamaran ...

3 products

Power catamaran : rigid inflatable boat (outboard) T460E O Air Yacht Ltd - Takacat

4.6m

15' 1"ft

The new generation of rigid inflatable catamarans

The unique technologies used in inflatable boats, RIBs and catamarans come together in our exciting new Takacat Explorer series.

Maximum - Safety, stability, speed, landing capabilities, versatility and fun!

Minimum - Weight, hp, draft, maintenance and hassle

The Takacat Explorer makes for a superb rigid inflatable ...

Power catamaran : rigid inflatable boat (outboard, center console) T 460F C Air Yacht Ltd - Takacat

4.6m

15' 1"ft

The new generation of rigid inflatable catamarans

The unique technologies used in inflatable boats, RIBs and catamarans come together in our exciting Takacat Freedom
and Explorer series. The rigid hull designs provides extreme stability and are ideal for an open boat or fully consoled set-up.

Superior Performance

The ...

Power catamaran : rigid inflatable boat (outboard) T410E O Air Yacht Ltd - Takacat

4.1m

13' 5"ft

4 products

Power catamaran : foldable inflatable boat (outboard) FOLDCAT 375FC SeaEagle.com

3.78m

12' 5"ft

Features you won't find in ordinary pontoon boats
Unique Folding Frame Exclusive! Most pontoon boats have a huge, metal frame ...

Power catamaran : foldable inflatable boat (outboard) AQUAUTE 14 Aquaquad

4.27m

14' 0"ft

AquaQuad's Utility and Exploration boat - UTE is a rigid inflatable watercraft ideally suited to ...

Power catamaran : rigid inflatable boat (outboard, center console) LUX Aquaquad

4.27m

14' 0"ft

AquaQuad's dynamically styled LUX is designed to provide you ...

Power catamaran : foldable inflatable boat (outboard) KS 335 Qingdao Lian Ya Boat Co

3.35m

11' 0"ft

Power catamaran : foldable inflatable boat (outboard) RH-001/420 Weihai Noahyacht Co.

4.2m

13' 9"ft

Length :

9.8ft

29.5ft

Related searches

Inflatable boat
Out-board inflatable boat
Rigid inflatable boat
Rigid inflatable
Outboard rigid inflatable
Power catamaran
Catamaran
Rigid catamaran
Folding-boat
Twin engine boat

Catalog search

Marstrom
Extreme 40 RIBs

Here the first 4 pages from the catalogue "Extreme 40 RIBs", returning results for: inflatable boat

P. 3
PHILOSOPHY eXtreme ribs has always been driven by performance. The eXtreme Rib was to improve the inefficiencies in rib construction using state of the art technology, and passion for premium products.

P. 10
EXTREME 40 FUEL SAVINGS Fuel consumption per day: 1 hours at top speed & 2 hours at 25knots & 2hours idle. eXtreme 40 cabin versus Protector 12.5 cabin, per day per week per year fuel price cost per EXTREME 40 cabin 121,2 727,2 29088 ? 1,10 ? 31.968 PROTECTOR 12.5 cabin 248,1 1488,6 59544 ? 1

P. 14
Cabin with two seats Boat covers Road trailer

P. 19
down points two seats points for water sports. Boat covers Road trailer
TP Marine BV
TP Marine Company Presentation

Here the first 5 pages from the catalogue "TP Marine Company Presentation", returning results for: inflatable boat

P. 37
37 © 2011 TP Marine B.V. TPM 1025 High Speed Interceptor RHIB TP Marine Company presentation

P. 40
40 © 2011 TP Marine B.V. 10 Meter RHIB Outboard TP Marine Company presentation

P. 41
41 © 2011 TP Marine B.V. 10 Meter RHIB Outboard TP Marine Company Presentation

P. 35
35 © 2011 TP Marine B.V. 10 RHIB Twin Waterjet TP Marine Company presentation

P. 36
36 © 2011 TP Marine B.V. 10 RHIB Twin Waterjet TP Marine Company presentation
Dickinson
Alaska-00-ALA Pdf

Here the first 5 pages from the catalogue "Alaska-00-ALA Pdf", returning results for: inflatable boat

P. 30
30 down, the bottom of the float should be parallel to the casting of the valve, in both directions). This very important to keep the float from binding on the stem guide as it moves up and down. If the float is not parallel to the casting, the float pin tabs on the float will need adjusting

P. 29
knob are attached. 2. Remove the float from the float pin; remove the needle from the seat fitting. Using a 5/16ths socket, remove the seats fitting from the valve top casting; however leave the copper washer in. 3. Remove the fuel inlet fitting only and clean or replace the stainless screen

P. 28
: No components available (must replace valve) 1994-2006: Repair Kit part# 02-200 2006- Present: Repair Kit part# 02-200C Includes: float, float pin, high temp screw, fuel screen, O ring, needle, seat, & washer.

P. 6
6 able to get your heater without sooting. A CO alarm should be installed in the boat. We also recommend the Dickinson high heat shut-off #02-210. 4. How Does the Chimney affect the Heater? The heater does not create the draft for a natural draft appliance to operate; it is the chimney

P. 22
to have the speed control turned up to a faster speed to get the fan blade spinning, then turn it down to the appropriate setting. This also applies, should the fan blade rattle. * The best low speed setting is at the 4 to 5 o?clock position on the speed control knob. The best medium setting is at the 5 to 6 o
Dickinson
LOFOTEN-00-LOF - Pdf

Here the first 5 pages from the catalogue "LOFOTEN-00-LOF - Pdf", returning results for: inflatable boat

P. 30
30 down, the bottom of the float should be parallel to the casting of the valve, in both directions). This very important to keep the float from binding on the stem guide as it moves up and down. If the float is not parallel to the casting, the float pin tabs on the float will need adjusting

P. 29
knob are attached. 2. Remove the float from the float pin; remove the needle from the seat fitting. Using a 5/16ths socket, remove the seats fitting from the valve top casting; however leave the copper washer in. 3. Remove the fuel inlet fitting only and clean or replace the stainless screen

P. 28
: No components available (must replace valve) 1994-2006: Repair Kit part# 02-200 2006- Present: Repair Kit part# 02-200C Includes: float, float pin, high temp screw, fuel screen, O ring, needle, seat, & washer.

P. 6
6 able to get your heater without sooting. A CO alarm should be installed in the boat. We also recommend the Dickinson high heat shut-off #02-210. 4. How Does the Chimney affect the Heater? The heater does not create the draft for a natural draft appliance to operate; it is the chimney

P. 22
to have the speed control turned up to a faster speed to get the fan blade spinning, then turn it down to the appropriate setting. This also applies, should the fan blade rattle. * The best low speed setting is at the 4 to 5 o?clock position on the speed control knob. The best medium setting is at the 5 to 6 o
Walker Bay
RIGID DINGHY BROCHURE Low Res

Here the first 5 pages from the catalogue "RIGID DINGHY BROCHURE Low Res", returning results for: inflatable boat

P. 9
RIGID INFLATABLE DINGHY. Walker Bay's Rigid Inflatable Dinghy (RID) combines the best features of a reliable hard- shell dinghy with the stability and utility of an inflatable. EXCEPTIONAL COCKPIT SPACE. Because of the large rigid hull structure with external tubes, the RID has exceptional cockpit

P. 11
WALKER BAY RID 275 RIGID INFLATABLE DINGHY MODEL RID 275 BEAM: 5'8" /172 cm LOA: 9' / 275 cm WEIGHT: 89 lbs / 40 kg MAX HP: 4 hp CAPACITY: 3 Persons The RID 275 Is the ideal boat for those who want the durability, cockpit space and lightweight features of the Walker Bay 8 but need

P. 20
For more information on Walker Bay products, please visit www.walkerbay.com NMMA INNOVATION AWARD Winner for 2005 Innovation in Inflatable Boat Design SAIL MAGAZINE'S FREEMAN K. PITTMAN AWARD Recognized for boating innovation in systems and construction. SAIL MAGAZINE'S BEST BOATS AWARD Recognized

P. 12
WALKER BAY RID 310 RIGID INFLATABLE DINGHY MODEL: RID 310 LOA: 10'2" / 310 cm BEAM: 6' /183 cm WEIGHT: 149 lbs / 68 kg MAX HP: 6 hp CAPACITY: 4 Persons STANDARD FEATURES: • Tube available in Orca® Hypalon® (310H) or 1100 Decitex PVC (310R) • One piece HIMC hull • 7

P. 18
and all Rigid Inflatable Dinghies (RID's). Part #99112 REPLACEMENT OARS High-tech Hydro Curve Oars feature a detachable HIMC blade. 6'6" or 7'. Includes collars. 6'6" Oars Part #99220 7' Oars Part #99221 FOR TIP UP DAVIT SOLUTIONS, PLEASE VISIT OUR WEBSITE AT: www.walkerbay.com/davits