|
|
CALIPSO
This is the new INMARE design of a protection system for anchor windlasses.
It avoids any anchor traction loads on the windlass.
It provides protection for the anchorage.
Refined with a hand-made splice, it is equipped with a 14 mm polyester line, an outstanding shock absorber and a hook that can be installed on 6-12 mm chains.
|
|
|
The VW Series of anchor winches are designed for traditional rope and chain combination anchor rodes, where manual transfer of the rode from the rope warping drum to the chainwheel is required.
|
|
|
The HWC Series is designed for automatic horizontal handling of chain only anchor rodes while offering an independent capstan for the retrieval of a secondary rope and chain rode or to assist with docking procedures.
|
|
Ercole and Super Ercole models:
housing and motor cover in special marine grade aluminium alloy. Finished in a white polyester powder coating.
|
|
Capstans for tender
Chromed-plated bronze base
and anodized aluminium drum
Motor watertight
Epicyclical gearbox
|
|
- Capstans
- Anodized aluminum base and chromed - plated bronze drums.
- Motor watertight to IP67 (3000 W escluded)
|
|
- Capstans
- Chromed-plated bronze base and drum
- Vertical drive motor: easy and installation from up side
- Motor watertight
- Epicyclical gearbox
|
|
|
An extremely versatile vertical capstan or general purpose electric winch for use as an anchor winch, pot hauler or davit winch.
|
|
The VC Series is designed for simple, low cost anchor recovery
on smaller boats and rope hauling on larger vessels.
|
|
- Deck hugging snag free design
- Unit can be mounted horizontally
- Luxury chrome finish over marine grade bronze
- Capstan features heavy duty knurled finish for increased grip
- Heavy duty dual direction motor in 12V and 24V DC
- Self aligning gearbox/adaptor
- Stainless steel shaft
- Stainless steel mounting bolts
- Shaft seal
- Installation/Operation booklet
|
|
- Deck hugging snag free design
- Unit can be mounted horizontally
- Luxury chrome finish over marine grade bronze
- Capstan features heavy duty knurled finish for increased grip
- Heavy duty dual direction motor in 12V and 24V DC, AC and Hydraulic
- Self aligning gearbox/adaptor
- Stainless steel shaft
- Stainless steel mounting bolts
- Shaft seal
- Installation/Operation booklet
|
|
- Luxury chrome finish over high tensile bronze
- Heavy duty dual direction integrated one piece gearbox/motor assembly
- Unit can be mounted vertically or horizontally
- Rotates clockwise
- Self aligning gearbox/adaptor
- Stainless steel shaft
- Stainless steel mounting bolts
- Shaft seal
- Installation/Operation booklet
|
|
- Windlass "On-deck" in hard-anodized aluminium
- Rope and chain on a single gypsy*
- Manual Free-Fall system
- Supplied with pressur lever
|
|
|
Base in aluminium and special nylon-glass fibre UV resistant - With and without drum - Rope and chain on a single gypsy - Provided pressure leve - 6 / 8 / 10 mm gypsies on the same base - Integrated solenoids unit - Emergency manual lift system - Manual free fall system - Watertight engine IP67
|
|
Smart and refined, small dimensions,
the horizontal windlasses Quick are a good solution for those customers who like horizontal shaft without half-measures.
The EAGLE models are provided with a casing which ensures that the engines are completely watertight IP67.
|
|
NEW "Automatic Free-Fall System"
The GENIUS models perfectly suit the requirements of those who have little space below deck or on deck. Compact and easy to install - guarantees top performance. In addition, they areprovided with a pressure lever. The Free-Fall technology applied to Genius allows the gypsy to be stopped to retrieve the anchor, by just touching the "up" control. Pushing the "down" control, the brake is released and the gypsy can turn freely (free-fall system operates). To stop the gypsy during "Free-Fall" just press the up control.
|
|
|
The GENIUS models perfectly suit the requirements of those who have little space below deck or on deck. Compact and easy to install - guarantees top performance. In addition, they areprovided with a pressure lever.
|
|
Hector range windlasses, born in 2005 with models 700/1000/1500 W, has widened its range with two new products, Hector 2300 W and Hector 1700 W, definitely more powerful and with an even more versatile use.
Ideal for boats between 38 and 64 ft, HECTOR is a very versatile windlass and among the many different combinations that you can choose between there is the version with two gypsy's which can operate separately or both at the same time. With the supplied selector (gypsy lock lever) you can choose to block one or the other gypsy making them working independently from each other or to block both at the same time.
All models are also supplied with an emergency manual lift system in case of need. Supported chain sizes is 10, 12/13 and 14mm.
The base is made in anodized aluminium, including the motor jacket (IP66).
|
|
|
The traditional electric windlass par excellence, suitable for boats up to 20 T. Very simple to use and totally reliable thanks to the operating disc brake clutch and a progressive friction system. Permanent lubrification makes it virtually maintenance-free. By selecting a 312 windlass, you will be rewarded with many years of highly reliable service.
|
|
Rule's Electric Winch product line comprises a broad range of high quality and reliable winches. Unique features include 3-stage planetary gears for greater pulling speed, power-in, power-out for consistent load control. Corrosion resistant die cast drums and lifetime lubrication. Each winch is shipped with the cable assembly including hook, controls, and all electrical hardware necessary for battery hook-up and mounting hardware. Each Series denotes the rated stall in pounds for the series.
|
|
Winches - Electric
Rule's Electric Winch product line comprises a broad range of high quality and reliable winches. Unique features include 3-stage planetary gears for greater pulling speed, power-in, power-out for consistent load control. Corrosion resistant die cast drums and lifetime lubrication. Each winch is shipped with the cable assembly including hook, controls, and all electrical hardware necessary for battery hook-up and mounting hardware. Each Series denotes the rated stall in pounds for the series.
|
|
|
The RIDER model windlasses have an anodized aluminium round base. They are all available with or without a drum. The gypsy, drum or cover gypsy are made of chrome-plated brass. In addition, they are provided with a pressure lever.
|
|
- Vertical windlasses
- Anodized aluminium base
- With and without drum
- Rope and chain on a single gypsy*
- Manual Free-Fall system
- Supplied with pressure lever
- Inspection cover
- Motor watertight to IP67
- Anodized aluminium gearbox
|
|
Vertical windlasses
in anodized aluminium
in hard oxide
With and without drum
Rope and chain on a single gypsy
Manual Free-Fall system
Emergency manual lift system
Supplied with pressure lever
Inspection lid
IP67 watertight motor
Anodized aluminium gearbox
|
|
- Vertical windlasses
- Chromed-plated bronze base.
- With and without drum
- Rope and chain on a single gypsy*
- Manual Free-Fall system
- Supplied with pressure lever.
- Inspection cover
- Vertical drive motor: easy and installation from up side
- Motor watertight
- Epicyclical gearbox
|
|
- Vertical windlasses
- Composite material base
- With and without drum
- Rope and chain on a single gypsy*
- Manual Free-Fall system
- Supplied with pressure lever.
- Inspection cover
- Motor watertight to IP67
- Anodized aluminium gearbox
|
|
|
The ASTER model windlasses have a chromed-plated bronze base provided with a new inspection cover. They are all available with or without a drum.
|
|
|
|
Boat windlasses, Capstans, Winches...
