|
|
|
The versatile Big B TMfender incorporates a Center Rope Tube that allows end-to-end line passage. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas. Big B TMinflatable vinyl fenders feature seamless construction, with molded ribs to minimize roll. Big B?s are made from the highest quality marinegrade vinyl with a high gloss finish. Available in four sizes to fit a full range of boat sizes.
|
|
MEGA 1 ad ANGOLO
It’s the new and unique angle fender.
Essential to cover dangerous corners. Easy to install. Does not need maintenance.
It is made from a soft material, which guarantees great resistance to adverse marine atmospheric conditions. The colour is permanently molded. The colour will not transfer to the hull and nor pieces of material
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
All dock cushions are constructed of commercial grade virgin polyethylene material with built-in UV inhibitor; and are ideal, cost effective solutions for fresh or salt water applications. Cushions come in white or black and provide durable long-lasting protection that will not scratch or mark boats.
Each cushion comes with molded-in mounting holes that make them easy to install. Cushions currently come in three shapes... flat back, u-shaped and L-shaped. The U-shaped cushions 2", 2.5" and 3.5" cavity backs (see dimensions below). All cushions are 4.5" wide.
|
|
|
Taylor Made Products offers a wide variety of options when it comes to protecting your boat and dock. With various profiles, materials, colors and accessories, your investment has never been safer.
|
|
The new Dock Bumper comes complete, ready to install onto an EZ Dock section.
Part # : 300180
|
|
Ultra lightweight fender made of carbon fibre. Mounted and demounted in a few minutes by hand.
Please feel free to contact us for further information!
|
|
Provides superior impact protection on pontoons
It can be installed on floating pontoons, concrete pontoons or docks.
It is easy to install. A system which allows for a quick, easy and secure attachment.
Made out of a closed-cell material, which guarantees great elasticity and resistance to impact and adverse marine atmospheric conditions
It will not deteriorate in the sun or mar your boat
|
|
SISTEMA TRE
A fender that offers maximum resistance to impacts and maximum elasticity.
It is particulary adapted for finger protection. It avoids the use of traditional boat fenders', increasing the marina mooring space by 10%.
It can be installed easily and quickly. Does not need maintenance.
It is made from a soft material, which guarantees great resistance to adverse marine atmospheric conditions. The colour is permanently molded. The colour will not transfer to the hull and nor pieces of material.
|
|
MEGA 1
Incredible union of technology and design. Thanks to its elastic material, the product will return to its original shape after being subjected to a big impact.
It is the first quay fender installable on concrete pontoons. Essential for petrol station pontoons and towing tack.
Easy to install. Does not need maintenance
It is made from a soft material, which guarantees great resistance to adverse marine atmospheric conditions. The colour is permanently molded. The colour will not transfer to the hull and nor pieces of material
|
|
MAX FENDER
Fixed on any dock, the Max Fender guarantees the best protection to crafts
in the event of impacts and scrapes.
Easy to install. Does not need maintenance
It is made from a soft material, which guarantees great resistance to adverse marine atmospheric conditions. The colour is permanently molded.
|
|
SISTEMA ZERO
Provides superior impact protection on pontoons.
It can be installed on floating pontoons, fingers, concrete pontoons or docks.
It is easy to install thanks to his modular and elastic structure. Does not need maintenance or special pieces (such as corner piece, joint, etc)
It is made from a soft material, which guarantees great resistance to adverse marine atmospheric conditions. The colour is permanently molded. The colour will not transfer to the hull and nor pieces of material
|
|
|
|
|
|
|
Nautica italiana presents a new fender, named BIG FENDER.
This fender, as well as all INMARE fenders, is made with a soft closed cell-material in an unique moulding. The material is known as E.V.A. (Ethyl Vinyl Acetate). No assemblies nor joints. Particularly elastic and resistant, the fender can guarantee the maximum protection to little up to big boats. Doesn’t need any maintenance and the material will not transfer colour or residues to the hull. UV resistant.
BIG FENDER can be fixed along floating dock pontoon and concrete quays.
The fender covers the angle of the pontoon, guaranteeing the best protection even to the boats which deep V-shaped bow. These boats often have the issue to rub the hull to the pontoon surface. Fixing the BIG FENDER, people are sure to avoid expensive scratches. Moreover the big fender is not an obstacle for people who walks along the pontoons ‘cause its surface is quite flat on top surface.
The greatest news is the fixing. The fender can be fixed with screws and/or strings avoiding to screw and usury the pontoon.
Approximated dimensions: 90 x 25 x 19 cm
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
CHARACTERISTICS:
RESINEX ® FENDERSare entirely made of closed-cell elastic expanded polyethylene that guaranteesunsinkability even in case of damage caused by breaking, rupturing or shearing when hitting rough ves- sel sides. The high elasticity of expanded polyethyleneensures a high energy absorption with low reactionforce, which is essential to eliminate the risk of damage to the vessels hull.The expanded polyethyleneis wrapped and welded around the steel zinc core, and is covered by a high thickness of elastomer polyurethane that gives an optimum abrasion and breaking resistance, which ensures a long performance even under strenous conditions. During various tests carried out, RESINEX ® FENDERS have undergone compressions of up to 80%with no damage and almost complete immediate dimensional recovery.
|
|
Dock Fender & Aluminum Bracket
Accmar Dock Fenders are designed to support vessels up to 90 feet in length. To ensure product durability, our dock fenders are manufactured from UV resistant, flexible PVC material and can be mounted on recycled plastic lumber (4x4 or 2x4) or unmounted.
Available in black or white, dock fenders can be purchased mounted or unmounted by the foot or up to continuous 16 ft. lengths.
ALUMINUM BRACKETS manufactured specifically to support your fenders are also available. Fabricated by AWS certified welders following TIG welding processes to ensure lasting strength and durability, our brackets attach directly to the dock. Brackets are sold by the foot and can be custom made to accomodate your specific requirements. Please contact us for specific prices.
|
|
A comprehensive range of AIRFLOAT MPS accessories is available including:
- Floating jetties
- Handrail stanchions for rope, wire, pipe or chain
- Diving or access ladders and steps
- Anchoring pillars
- Mooring cleats
- 2m and 1m PVC fenders
- UHMW wall side fenders
- Pile and 'H' beam guides
Other special requirements can be manufactured to a client's individual specification.
|
|
KindaDek Marine is perfect fendering material to help protect vessels, structures, pontoons and staging. It has low surface friction property and resistant to wear similar to timber.
Bolting and fixing is easy as our material works just like hardwood and will accept any traditional fixing type.
KindaDek Marine Fendering material complements the KindaDek Marine deckboard. As the same colour and surface finish can be applied to the fender.
|
|
Protect the leading edge of your pontoons with our double molded PVC Pontoon Protector. Manufactured from the same vinyl as our rugged Dock Pro TM dock edging, these will save both dock and boat from impact damage. Easy to install with waterproof, self-adhesive strips. Sold in pairs.
|
|
|
Taylor Made Products offers a wide variety of options when it comes to protecting your boat and dock. With various profiles, materials, colors and accessories, your investment has never been safer.
|
|
| ... products without information |
| |
|
|
Boat fenders
