|
|
Armstrong Deckplates protect your boat, your equipment and your reputation by completely sealing against water intrusion. Easy to install and completely watertight, Armstrong Deckplates provide easy access to behind bulkheads, radar arches, wire ways, motor wells, or anywhere else.
Additional Features…
• No trim ring to install
• No fasteners
• No sealant or caulking
• No clean-up
• No lost, broken, or dirty parts
• Easy installation
• Tool-free operation
|
|
|
Barton offer a wide range of inspection covers in half turn, screw and push fit versions. Round and square versions are included.
|
|
Until now, filling your tank automatically meant fuel spillage into the port. However, thanks to the new anti overspill Econab deck-entry, this is no longer the case.
Filling your tank will become as easy as filling your car.
When the tank is full, the nozzle will automatically stop the fuelling process!
- Ecological (zero spillage)
- Avoids smells and dirt
- Easy to install
- Can be assembled on new or existing boats
- Anti theft grid
- Can be used for all types of fuel
- Can be installed on all types of boats
- Can be fitted in place of the standard deck entry
|
|
NSD-10 R or L, NSDX-10 R or L FOR DOWNWARD-OPENING FLAP
NSD-20 R or L, NSDX-20 R or L FOR TOP-OPENING FLAP
NSD-35 R or L, NSDX-35 R or L FOR UPWARD-OPENING FLAP
*Keeps flap/lid from slamming down or flying open.
*Recognized by LGA for 50,000 cycles.
*Opening/Closing speed adjustable.
*Opening angle is adjustable by changing mounting position.
*Handed-Choose Right and Left versions for your application.
*Calculate the appropriate torque for your application.
(See our websites for more information.)
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK website under construction.
E-mail: export@sugatsune.co.jp
|
|
EB-303/EP
FOLDING BRACKET
Material: 304 Stainless Steel
Finish: Electro Polished
(Screws not included.)
Load Capacity: 150 kg (330 lbs)
Length: 305.5mm, Width: 20-29 mm, Height: 165 mm
Visit our websites for other brackets.
http://www.sugatsune.co.jp (Japan)
http://www.sugatsune.com (USA)
http://www.sugatsune.net (USA, Industrial)
|
|
FULL MORTISE TEMPLATE HINGE
3535, 4040, 4545 (3.5"X3.5", 4"X4", 4.5"X4.5")
Material: Brass
Finish: Polished Brass (PB)
Chrome (CR)
Supplied with Screws
Meets ANSI specs.
OR with Ball Bearings -- 4040B, 4545B
Ball bearings contained in 2 rings ensure smooth movement and durability.
Perfectly extruded material ensures even thickness with smooth edges.
Special clear lacquer is used for extra-hard surface and extra-long protection.
Material: Polished Brass (PB)
Satin Chrome (SC)
Antique Brass (AB)
Finials also available.
VISIT OUR WEBSITES FOR MORE INFORMATION:
www.sugatsune.co.jp (Sugatsune Japan)
www.sugatsune.com (Sugatsune America)
www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK site now under construction.
E-mail: export@sugatsune.co.jp
|
|
|
The Southco Troller is a cam latch developed for cabin floor hatches but is also suitable for smaller interior and exterior storage compartments and electronic panels. The product offers a flushed surface, with no tripping hazards yet offers a good grip and ergonomic comfort. The key doubles as a handle and can be easily released. Adjustable for panel thicknesses of 16 (5/8”) to 19 (3/4”).
|
|
Attractive flush-mount styling, a recessed handle, and concealed mounting hardware give these latches an appealing look. A solid feel and push-to-close convenience give them appealing functionality. And corrosion-resistant construction keeps them looking and functioning beautifully for a long time, even in outdoor applications.
Product Features and Benefits
Installs easily from front of panel through single round-hole, and attaches from rear with mounting bracket and hardware. Fits flush to panel when installed, with minimal protrusion inside of cabinet.
- Slightly angled pawl ensures tight grip on keeper within tolerances
- Spring loaded handle helps prevent rattles
- Provides tab for inside actuation whether locked or unlocked
- Available in polycarbonate and stainless steel corrosion-resistant materials for long-life performance
- Available in two sizes to accommodate larger/thicker panels
|
|
MATTER
- Black Technopolymère containing reinforced glass fiber polyamide, matt completion.
- Resists solvents, oils, greases and other chemical agents.
USE
- Application Temperature until 80°C.
ASSEMBLY
- To prepare the panel like magazine.
- To insert the handle in the panel by the higher part.
- To make pressure on the lower part of the handle until its complete insertion.
|
|
304 B Series STAINLESS STEEL CONCEALED HINGE
(Stainless Steel Mount sold separately)
304B-46/9, 304B-46/14, 304B-46/19 Free swinging
304B-C46/9, 304B-C46/14, 304B-C46/19 Self-Closing
Material: 304 Stainless Steel, Polished Finish
Sugatsune has a wide range of concealed hinges for industrial, furniture, or architectural applications.
Please visit our website or our PDF catalogues here for further information about these and other similar products.
Many Stainless Steel Concealed Hinges Available.
|
|
|
CONCEALED HINGE STAINLESS, HAS 90° - WITH SETBACK
|
|
JH-25 or JH-35 Soft-Close Dampening Hinge
(Catalogue #152, Page 181)
Bracket: PB Plastic
Cap: Polypropylene
Damper: 304 Stainless Steel
Colour: Dark Grey
(Screws not included)
JH-25 Torque per Pair: 31-51 kgf/cm (27-44 lbs/inch)
JH-35 Torque per Pair: 51-71 kgf/cm (44-61 lbs/inch)
Soft-close damper keeps lid from slamming shut
Operating Temperature: 0~40C (32~104F)
Operating angle: 115 degrees / Dead angle: 5 degrees
A-type damper: Damper works counterclockwise
B-type damper: Damper works clockwise
Sold per pair(Each of A/B type)
Visit our websites for more dampening hinges and dampers.
http://www.sugatsune.co.jp
http://www.sugatsune.net
http://www.sugatsune.com
E-mail: export@sugatsune.co.jp
|
|
For 2" I.D. hose. These deck fills are both imprinted and color-coded to specify either gas or diesel. Highly polished finish. Flush cap is slotted for separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately.
|
|
• Chrome Plated Bronze
• 35° Angled Hose Bib
• Deck Plate Key, O-Ring and Retaining Cable on Cap Included
• Cap Has A Slot Between the Holes
• Ground Wire Required
|
|
Pair of handles for item 5036.
Overall size: 150 x 60 x 25 mm.
Square: 9 mm
|
|
Seaview is proud to present the FLOOR ANCHORS from PYI.
This product is designed and engineered to secure floorboards or lock hinged panels. Made out of
316L stainless steel or brass, they will not corrode, discolour with age or damage the wood surface.
The Floor Anchor safely holds 200kg per unit. The PYI Floor Anchors meet ISAF (formerly ORL)
requirements for offshore boats (category 2.03).
The opening mechanism is a simple bayonet style, with ¼ turn lock and release that will not loosen
with age. It can be opened or closed by either a coin or a flat head screwdriver. The 11-FA0-34 is
suitable for 13 to 19 mm thick floorboards and the 11-FA1-00 is for 22 to 30mm thick floorboards.
In 318 stainless steel or in brass, this locking system will allow you to safely secure a boat
floorboards without damaging the wood, while still allowing easy access, all of this with a stunning
look never before offered as a fastener.
|
|
STAINLESS STEEL RING PULL
Material: 316 stainless steel
Finish : Polished
No screws included. Recommended screw size 3.5mm
|
|
F16-4000
Marine grade type 316 stainless steel low profile design with hidden fasteners, with an edge thickness of 3/32"
|
|
|
M1 Stainless Steel Slam Latch is suitable for various types of deck hatches. The latch is available both in the sizes: 1,5", 2" and 2,5". Non locking, locking and a security locking (MIM locking) alternative. The latch is made of 316 SS quality and therefore withstand the toughest of marine environments.
|
|
|
|
|
|
|
When you want to mount and/or actuate a push-to-close latch from a variety of angles or locations, the Sundecker Panel Latch provides loads of versatility. The substantially sized latch body tolerates strong pulling forces, and the remote latch actuation option helps keep latch points free from external hardware.
Product Features and Benefits
The basic push-to-close slide mechanism in this latch is enhanced with a strong body design and multiple latch and release options to create a versatile concealed latch solution for applications where smaller latches just don't work.
- Actuator strap ( 1 meter/39" long) attaches at rear of latch but can be bent and routed to pull from various angles
- Actuator strap style assembly ships with loop strap release, angled strap protector, and latch striker
- Eyelet connection style provides an attachment point for a cable actuation system
- Strong body construction withstands greater pulling force for opening
- Latch bolts to inside of enclosure, out of sight
- All marine-grade materials
|
|
The simple, yet efficient design of the Snappy Latch provides for positive latch engagement with a simple push-to-close motion, then releases automatically when the panel is lifted. The user never even touches the latch. It's a great choice for applications requiring frequent access with an economy of motion.
Product Features and Benefits
The self-actuating design of the fully concealed Snappy Panel Latch makes it one of the easiest latches to use. Its self-adjusting pawl automatically accommodates misalignment.
- Combination sliding/pivoting action enables latch to engage, hold, and disengage as user closes and opens door
- Built-in self-correcting feature automatically resets latch to function properly, even if deadbolt is forced out of normal position
- Over-center latching action holds panel closed firmly, to reduce noisy vibration
- Non-corrosive materials suitable for exposed applications
|
|
H20-0320
These heavy duty hinges are perfect for folding cabin doors and larger hatches.
|
|
|
Superior quality stainless steel hinges supplied with either CSK holes or studs, traditional (180 degree opening) or flush (100 degree opening) pin style. Mirror polished and designed to compliment the finest quality yachts and powered craft.
|
|
- Chrome Plated Extruded Brass
- Extra Heavy Duty Plastic Bearings
- Removable Pin
For Transom Doors and other applications where strength and smooth operation are required
|
|
100 Series Butt Hinge
Material: Brass
Finish: Polished Brass (PB)
Satin Nickel (SN)
Chrome(CR)
Supplied with screws.
|
|
SPRING LOADED LID STAY
Spring Mechanism assists lifting door and holds in open position.
2 types available for side panel or face front mount
Material: Body & Bracket-304 Stainless Steel Arm-Polyacetal
Application: Toy box, Outdoor stora
|
|
Description:
- Angled Neck
- Chrome Plated Bronze Cap
- Black Plastic Body
- Stainless Steel Bead Chain
- Integral Tank Vent with Flame Arrestor and Anti Surge Valve
- Deck Plate Key Included
|
|
|
|
Boat deck plates, Deck fillers, Latches, Hinges
