|
|
|
Size: 110 x 24 cm Available in the colours white and blue.
|
|
The profiles are UV resistant and contains out of flexible PVC.
Size: 244 x 13 x 3,8 cm
Available in the colours white and blue.
|
|
The profiles are UV resistant and contains out of flexible PVC.
Size: 244 x 7 x 8,2 cm
Available in the colours white and blue.
|
|
Our FEND-OFF® Dock Fenders are designed to provide a protective barrier between hard surfaces, such as docks, seawalls, pilings and the hulls of boats and yachts. Pictured here are the White FEND-OFF® Concrete Pile Fenders.
The vertically mounted CP FEND-OFF® Dock Fenders (shown at left) are on large, wooden structures at the end of a concrete wall. This system provides maximum protection for the berthing of large yachts against concrete.
|
|
Offered in four styles — vertical, horizontal, floating dock, and small boat. The FEND-ALL® Family of Fenders are the only continuously supported, double-wall fenders available on the market with an "internal high-energy absorption web" capable of 250+% extension before breakage. This combined with a special UV stabilized material will make the FEND-ALL® Family of Fenders the standard bearer for all marine fenders. The FEND-ALL® Family of Fenders are trademarked and patented (patent #6,289,836).
The revolutionary FA300 vertical or horizontal corner fender has been very popular with marinas that have floating fuel docks and high volume transient docks for its durability and resiliency.
The FA201 is rapidly becoming the standard for floating docks that handle larger vessels due to its unique patented design, durability, and strength.
These two fenders were quickly and successfully brought to market through the design, testing, and development stages, and passed with flying colors. The main, and most popular, fender in the FEND-ALL® Family of Fenders, the FA has produced results beyond design expectations.
The FEND-ALL® Family of Fenders are made of a polyvinyl chloride (PVC) called GEON C9000. The fenders are extruded from virgin material and have a life expectancy of 10+ years.
|
|
|
Buffer Strip is available for use on jetty's, marina's, pontoon's and pileguides. The Marine Dock System range is a proven protection system for your craft.
|
|
All dock cushions are constructed of commercial grade virgin polyethylene material with built-in UV inhibitor; and are ideal, cost effective solutions for fresh or salt water applications. Cushions come in white or black and provide durable long-lasting protection that will not scratch or mark boats.
Each cushion comes with molded-in mounting holes that make them easy to install. Cushions currently come in three shapes... flat back, u-shaped and L-shaped. The U-shaped cushions 2", 2.5" and 3.5" cavity backs (see dimensions below). All cushions are 4.5" wide.
|
|
Protect the leading edge of your pontoons with our double molded PVC Pontoon Protector. Manufactured from the same vinyl as our rugged Dock Pro TM dock edging, these will save both dock and boat from impact damage. Easy to install with waterproof, self-adhesive strips. Sold in pairs.
|
|
|
Protects your boat from getting all those ugly marks alongside caused by that older dock wheel. Our durable covers fit all Taylor Dock Wheels. Made with our "Ultra-V-Tex" marine grade material, with a hook and loop Velcro closure. Secures around the dock wheel via an inner skirt with a bungee cord drawstring. Easy to install in minutes, no tools required.
|
|
All Dolphin roto-molded fenders are manufactured from the best quality marine grade vinyl resulting in superior strength, cushioning and a high gloss finish. Dolphin fenders have been tested for many years in various marine environments worldwide. Dolphin fenders resist deterioration from mildew, gas, oil, seawater and bateria and have built in ultra violet inhibitors. All fenders include an inflation valve to allow for adjustment for the desired level of firmness.
Dolphin Twin Eye fenders feature specially reinforced heavy-duty integral lugs for added strength snd longer durability. these fenders provide maximum protection and value for your dollar. Available in 7 sizes and colours.
|
|
POSEIDONE
This revolutionary boat fender, blends fundamentals with functionality.
Thanks to its large dimensions, it guarantees a level of efficiency never before reached by traditional fenders.
It will not deflate, nor roll when it comes in contact with other boats and can be easily stowed.
It is made from a soft material, which guarantees great resistance to marine atmospheric conditions. The colour is permanently molded. The colour will not transfer to the hull and nor pieces of material
|
|
Since 1992 the first and unique clip-on fenders.
Solid cushion of durable polyurethane.
Exceptional boat protection and long life - cannot deflate.
Fit most guardrails and gunwales.
In place where you need them with correct line length - ready in seconds.
No need for fender baskets or other inconvenient stowage.
They don't get in the way on the side decks.
Once they are hung over the side of the boat they protect it, remaining steady even in strong wind because they are solid.
|
|
|
The finest utility fender on the market. Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide boaters with the maximum protection available from a utility fender. All six sizes feature inflation valves to adjust the level of firmness to satisfy all applications.
|
|
|
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your investment.
|
|
Use this Davis accessory to clip your fenders to rails, lifelines, side wing windows or cleats. Fender Tender II simplifies the handling and relocation of boat fenders. The "Railing Lock" firmly grasps rails from 7/8" to 1" (22 to 25 mm) diameter. New "Lifeline Lock" provides added safety. Use 1/4" to 3/8" (6 mm to 9 mm) diameter nylon line. Made of tough, sun-resistant plastic.
|
|
Edge Mount Kits
Design For Edge Applications
- Easily attaches to your dock for secure fender installation
- Designed to be placed on the Edge of your slip to hold your fender securely
- All aluminum construction for long life
- All stainless steel and nylon hardware included
- Installation is a snap requiring only common hand tools
- Works with most popular 8-1/2 " Fender designs
|
|
FenderBud™ is designed for floating docks to secure your fenders properly instead of using ropes or tie wraps.
This FenderBud™ model is designed to protect the rear (stern) along with the swim platform while docking.
- Easily attaches to your dock for secure fender installation
- Designed to be placed in the rear of your slip to hold your fender securely
- Helps protect your platform and transom from dock collisions by holding the fender in proper position
- All aluminum construction for long life
- All stainless steel and nylon hardware included
- Installation is a snap requiring only simple hand tools
- Works with most popular 6" and 8" Fender designs
|
|
Fender cover with your boatname and/or logo
Lettered fenders are proof of individuality and exclusiveness. What has been reserved to super yachts so far is now affordable for all owners.
Your boat name or logo can be knitted directly into the fender cover fabric (not embroidered or printed on). Thus lettering is permanent and can not get rubbed of.
|
|
FENDEQUIP FENDERCOVERS TO FIT MAJONI FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT DAN HILL PLAST FENDERS
The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT ANCHOR MARINE FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
AVAILABLE TO FIT THE ENTIRE POLYFORM SERIES
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order.
|
|
Designed for the whole range of Ocean fenders.
Exceptional fender protection for long life.
The material is soft and fits perfectly.
Polyester rings on both ends.
One ring is adjustable with PVC clip and inox spring for better grip.
Always stays in place.
Customised on request.
100% soft polyester fabric
|
|
This fender clip is a versatile, quick and easy way to securely fasten a boat fender to your railing, lifeline or stanchion in a "snap". Made of a durable marine grade UV resistant plastic with a nickel platted solid brass grommet. Will handle lines up to 1/2" in diameter and will attach to railings up to 1" in diameter.
(package of two clips / available in white or black)
|
|
The first and unique fender for the best bow protection for sailing boats and catamarans.
Prevents the anchor from swinging against the bow when you weigh anchor and ideal for bow berthing.
Solid cushion of durable polyurethane.
Exceptional boat protection and long life - cannot deflate.
Fits all bow shapes.
Two through holes with nylon bushes for the lines holding the fender safely in place.
Registered pattern - CAD Design
|
|
Attractive fender covers with the boat name, a yacht club logo or the manufacturer logo will give an exclusive first impression, wehen your goat is entering port or guests are coming on board.
Design your new fender equipment according to your wishes!
|
|
|
|
Fenders
