|
|
Armstrong Deckplates protect your boat, your equipment and your reputation by completely sealing against water intrusion. Easy to install and completely watertight, Armstrong Deckplates provide easy access to behind bulkheads, radar arches, wire ways, motor wells, or anywhere else.
Additional Features…
• No trim ring to install
• No fasteners
• No sealant or caulking
• No clean-up
• No lost, broken, or dirty parts
• Easy installation
• Tool-free operation
|
|
|
Barton offer a wide range of inspection covers in half turn, screw and push fit versions. Round and square versions are included.
|
|
Until now, filling your tank automatically meant fuel spillage into the port. However, thanks to the new anti overspill Econab deck-entry, this is no longer the case.
Filling your tank will become as easy as filling your car.
When the tank is full, the nozzle will automatically stop the fuelling process!
- Ecological (zero spillage)
- Avoids smells and dirt
- Easy to install
- Can be assembled on new or existing boats
- Anti theft grid
- Can be used for all types of fuel
- Can be installed on all types of boats
- Can be fitted in place of the standard deck entry
|
|
NSD-10 R or L, NSDX-10 R or L FOR DOWNWARD-OPENING FLAP
NSD-20 R or L, NSDX-20 R or L FOR TOP-OPENING FLAP
NSD-35 R or L, NSDX-35 R or L FOR UPWARD-OPENING FLAP
*Keeps flap/lid from slamming down or flying open.
*Recognized by LGA for 50,000 cycles.
*Opening/Closing speed adjustable.
*Opening angle is adjustable by changing mounting position.
*Handed-Choose Right and Left versions for your application.
*Calculate the appropriate torque for your application.
(See our websites for more information.)
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK website under construction.
E-mail: export@sugatsune.co.jp
|
|
EB-303/EP
FOLDING BRACKET
Material: 304 Stainless Steel
Finish: Electro Polished
(Screws not included.)
Load Capacity: 150 kg (330 lbs)
Length: 305.5mm, Width: 20-29 mm, Height: 165 mm
Visit our websites for other brackets.
http://www.sugatsune.co.jp (Japan)
http://www.sugatsune.com (USA)
http://www.sugatsune.net (USA, Industrial)
|
|
FULL MORTISE TEMPLATE HINGE
3535, 4040, 4545 (3.5"X3.5", 4"X4", 4.5"X4.5")
Material: Brass
Finish: Polished Brass (PB)
Chrome (CR)
Supplied with Screws
Meets ANSI specs.
OR with Ball Bearings -- 4040B, 4545B
Ball bearings contained in 2 rings ensure smooth movement and durability.
Perfectly extruded material ensures even thickness with smooth edges.
Special clear lacquer is used for extra-hard surface and extra-long protection.
Material: Polished Brass (PB)
Satin Chrome (SC)
Antique Brass (AB)
Finials also available.
VISIT OUR WEBSITES FOR MORE INFORMATION:
www.sugatsune.co.jp (Sugatsune Japan)
www.sugatsune.com (Sugatsune America)
www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK site now under construction.
E-mail: export@sugatsune.co.jp
|
|
304 B Series STAINLESS STEEL CONCEALED HINGE
(Stainless Steel Mount sold separately)
304B-46/9, 304B-46/14, 304B-46/19 Free swinging
304B-C46/9, 304B-C46/14, 304B-C46/19 Self-Closing
Material: 304 Stainless Steel, Polished Finish
Sugatsune has a wide range of concealed hinges for industrial, furniture, or architectural applications.
Please visit our website or our PDF catalogues here for further information about these and other similar products.
Many Stainless Steel Concealed Hinges Available.
|
|
JH-25 or JH-35 Soft-Close Dampening Hinge
(Catalogue #152, Page 181)
Bracket: PB Plastic
Cap: Polypropylene
Damper: 304 Stainless Steel
Colour: Dark Grey
(Screws not included)
JH-25 Torque per Pair: 31-51 kgf/cm (27-44 lbs/inch)
JH-35 Torque per Pair: 51-71 kgf/cm (44-61 lbs/inch)
Soft-close damper keeps lid from slamming shut
Operating Temperature: 0~40C (32~104F)
Operating angle: 115 degrees / Dead angle: 5 degrees
A-type damper: Damper works counterclockwise
B-type damper: Damper works clockwise
Sold per pair(Each of A/B type)
Visit our websites for more dampening hinges and dampers.
http://www.sugatsune.co.jp
http://www.sugatsune.net
http://www.sugatsune.com
E-mail: export@sugatsune.co.jp
|
|
For 2" I.D. hose. These deck fills are both imprinted and color-coded to specify either gas or diesel. Highly polished finish. Flush cap is slotted for separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately.
|
|
STAINLESS STEEL RING PULL
Material: 316 stainless steel
Finish : Polished
No screws included. Recommended screw size 3.5mm
|
|
Our range of quality hinges are made entirely of 316 Stainless Steel, are available with flush or traditional pin and a choice of stud lengths (H values 10, 25, 40, or 60) or countersunk (CSK) for screw fitting.
The part diagrams on this page show the traditional style, however the flush style is available. Please refer to the Notes section at the bottom of the page for detail of the available options. Please ensure that you select the correct choice of style and stud length when placing your order. Please contact us if you have any queries.
|
|
100 Series Butt Hinge
Material: Brass
Finish: Polished Brass (PB)
Satin Nickel (SN)
Chrome(CR)
Supplied with screws.
|
|
SPRING LOADED LID STAY
Spring Mechanism assists lifting door and holds in open position.
2 types available for side panel or face front mount
Material: Body & Bracket-304 Stainless Steel Arm-Polyacetal
Application: Toy box, Outdoor stora
|
|
Piano Hinge LSD-30 304 Stainless Steel
Material: 304 Stainless Steel
Finish: Satin
Screws not included
|
|
PKL-08
PUSH LATCH
Finish: Gold Color, Chrome Color, Black Nickel
Latch body color: Black or White
Material: Latch Body - ABS
Plastic Push Knob - Zinc Alloy
Counter Plate - ABS
ABS Plastic Supplied with screws (3.1x10, 3.1x28)
Door Thickness: 15 mm-30 mm (19/32 inch- 3/16 inch)
For Doors 13 mm thick, use a 2 mm plastic spacer (sold separately)
Holding force:10 kg (22 lbs)
Non-handed
Popular item for boats.
VISIT OUR WEBSITES FOR MORE LATCHES:
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
E-mail: export@sugatsune.co.jp
|
|
DRAW LATCH
Material: 304 Stainless Steel
Finish: Satin
Recommend screws: M4 Screws (not included)
Body: 304 Stainless Steel, Satin Finish
Button: Synthetic Rubber
Counter Plate: 304 Stainless Steel
Mounting Plate: 304 Stainless Steel
VISIT OUR WEBSITES FOR MORE LATCHES:
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
***Sugatsune UK website now under construction.
E-mail: export@sugatsune.co.jp
|
|
STAINLESS STEEL SPRING HINGE
Material: 304 Stainless Steel
Finish: Satin
Self-closing
Adjustable closing speed
Indoor or outdoor use
No screws supplied
|
|
LSK STAINLESS STEEL HINGE
316 Stainless Steel Construction.
Satin Stainless Steel Finish.
Several sizes available from 51mm to 152mm height.
Please visit our website or our PDF catalogues here (catalog #152, page 167) for more information about this and other butt hinges.
sugatsune.co.jp (Sugatsune Japan)
sugatsune.com (Sugatsune America)
sugatsune.net (Sugatsune America- Industrial)
|
|
|
|
Deck plates, Deck fillers, Latches, Hinges
