|
|
ODIM ABAS Active Heave Compensation Cranes are constantly adapting to wave motions and increases precision and load stability. This boosts safety and extends the operational window in unstable waters.
Our Active Heave Compensation cranes can be delivered either with traditional stell rope winch, or with the innovative CTCU and fiber rope.
LIFTING RANGE : Up to 250 tons on 3000 m depths
|
|
|
FERRI electrohydraulic cranes are designed and manufactured in accordance with ISO and DIN standards and with the “Code for Lifting Appliances” of the leading Classification Societies. With an incorporated hydraulic unit designed to save space and simplify installation.
|
|
|
Melcal Marine JL Series knuckle box boom pedestal marine cranes, are tailor made to your requested specifications, in different boom lengths, lifting capacities and sea state conditions. All crane models can be certified by all Classification Societies.
|
|
In our efforts to meet the various material handling requirements across industry verticals, we design & develop sturdy & superior cranes that are unmatched in quality & performance. Paying utmost importance to the electrical, electronic, hydraulic and mechanical / structural aspects of crane manufacturing, we design & develop cranes that comply with international quality standards.
The Diesel Unit
The diesel engine installed in our various cranes is equipped with various safety features like flame arrester, spark arrester, air inlet shutdown etc. We have third party certification for Diesel Engine for compliance to EEMUA Pub 107 (Recommendation for the Protection of Diesel Engine Operating in Hazardous Area) and other international safety standards.
|
|
- have all cylinder piston rods, pins and high pressure pipes of seawater resistant (stainless) steel
-are delivered shotblasted, metallized, primed and epoxy painted
-can turn through 360 degrees
-can be delivered with both working radius (reach) and foundation designed to suit each individual vessel
-have powerful slewing system with automatic brake
-can be delivered controlled from platform, electric remote controlled, or radio controlled
-have extra long life with a minimum of maintenance .
-have a rugged construction made to meet the roughest conditions.
-have an extra broad construction of the linkages ensures the stability and allows a higher slewing torque of the cranes.
-can be delivered with electrohydraulic Power Pack built inside the foundation column.
-are designed to carry the maximum load, even when fully extended.
|
|
The MPC is a double girder container crane especially designed for use in harbour complexes where high turnover and continuous operation are required:
Precise positioning of the containers through Litronic control developed by Liebherr
The control of the turntable ensures the unchanged position (rotation axis) of the container during loading and unloading.
Four independent drive systems ensure continuous operation with full load and reduced speeds, should a fault occur.
Driver's cabin is positioned on the underside of the container rotating arms allowing unrestricted view of the containers.
Significant reduction in swinging of load during slewing mode at minimum radius.
|
|
Service Cranes for offshore use
Typical applications:
- Supply vessels
- Anchor handling/Tug
- Research vessels
- Cable and Pipe layers
|
|
The MPG double girder grab deck cranes is especially designed for use on board transshippers where high turnover rates and continuous operation are required:
Less wear and therefore longer lifetime of ropes due to special positioning of the hoisting winch at the end of the grab rotating arms.
Four independent drive systems ensuring continuous operation with full load and reduced speeds, should a fault occur.
Driver's cabin is positioned on the underside of the grab rotating arms allowing for unrestricted view of the hold.
Significant reduction in swinging of grab during slewing mode at minimum radius.
|
|
GLB crane - Bulk handling crane:
Crane type:
GLB electro-hydraulic deck cranes are designed for bulk carriers. We focused on giving the GLB a robust design, and excellent control and operational properties. The range covers lifting capacities from 25 to 36 tonnes, with 18-30 m outreaches. GLB cranes are built from modules, and are easy to maintain and install.
General design:
GLB cranes are designed to meet the rules of all recognised classification societies and regulatory bodies. They are designed to work in the tough conditions that go with grab and log handling. The cranes have a stepless control system, and hoisting, luffing and slewing motions are independent of each other. This means that at their maximum capacity GLB cranes can operate at full speed using all three movements at the same time. These cranes can be supplied with the tools needed for handling particular cargoes.
|
|
|
Based on the DK II design, the DK V was conceived by Neuenfelder Maschinenfabrik as a crane specifically designed for use on bulk carriers, but it can also be used on numerous other types of ships.
|
|
CBG cranes are designed for rapid and efficient turnover of coal, ore and all types of bulk cargo and have the following characteristics:
Use of a four-rope grab enables high cargo turnover.
Specially designed to enable continuous crane operation.
The special geometry allows for a horizontal load path in luffing operation.
Wide rope field for stabilising the hook ensures safe operation and cargo handling.
Maintenance free hydraulic luffing arms, chrome-nickel plated, which reduce operating and maintenance costs.
|
|
|
The group name of Cs.-type slewing cranes represent the executions of slewing cranes with many functions: handling of stores, work boats and gangways.The group name of Chs.-type hydraulic slewing cranes represents the executions of slewing cranes for many functions: handling of stores and hoses and/or rescue boats and liferafts. These and other systems are available upon request. The systems are in full accordance with the present rules of Lloyd's Register of Shipping and of Germanischer Lloyd. Other certification upon request.
|
|
|
|
|
|
|
Hose handling crane (HH crane):
- Safe and reliable hose handling crane
Crane type:
Electro-hydraulic hose handling crane of self-contained type. The crane has a robust and solid design with components selected for a long life in demanding marine environments. The standard range covers capacities from 3 tonnes to 25 tonnes with outreaches up to 24 m.
Explosion-proof:
The hose handling crane is designed for working in hazardous areas and is driven by an explosion-proof electric motor. The electrical starter is located in safe area and EExde start/stop buttons are mounted on the crane.
General design:
The MacGREGOR hose handling cranes are designed to fulfill the OCIMF recommendations. The cranes are designed for a temperature range from +45°C to the lowest ambient working temperature for worldwide trading according to classification societies%u2019 requirements. All crane types utilise the same basic machinery but differ in the disposition of components. Standardised and modularised components make it easy to build cranes with safe working loads from 3 tonnes up to 25 tonnes with outreaches to 24 m.
|
|
|
|
|
|
|
K4 electro-hydraulic four-rope grab ship crane:
- To meet the toughest conditions in terms of lifting capability and working environment
Crane type:
K4 electro-hydraulic four-rope grab cranes are self-contained units with all machinery enclosed in the crane house. This protects it from the weather, corrosion and damage. The standard K4 range covers lifting capacities from 25 to 30 tonnes, with outreaches up to 32 m. To further improve outreach, cycle time and positioning performance the crane can be installed on an eccentric plattform.
General design:
K4 cranes are designed to meet the rules of all recognised classification societies and regulatory bodies. MacGREGOR´s CC2000 system ensures smooth, fast and stepless crane control. Hoisting, luffing and slewing motions are independent of each other. This means that at their maximum capacity K4 cranes can operate at full speed using all three movements at the same time. In 'heavy duty' version these four rope grab cranes can work up to 6,000 hours a year and have the capacity to lift 600 - 700 tonnes per hour.
|
|
GL - Wire-luffing | 2-wire | grab crane:
- Designed for handling containers and multipurpose cargoes
Crane type:
GL electro-hydraulic cranes are selfcontained units with all machinery enclosed in the crane house. This protects it from the weather, corrosion and damage. The standard GL range covers lifting capacities from 25 to 90 tonnes, with outreaches up to 32 m. Each crane is tested electrically, hydraulically and mechanically before delivery.
General design:
GL cranes are designed to meet the rules of all recognised classification societies and regulatory bodies. MacGREGOR´s CC2000 system ensures smooth, fast and stepless crane control. Hoisting, luffing and slewing motions are independent of each other. This means that at their maximum capacity GL cranes can operate at full speed using all three movements at the same time. These cranes can be supplied with the tools needed for handling particular cargoes.
|
|
Compact and slim cargo handling lifting crane:
- Where dimensions must be compact and air-draft is limited
Crane type:
LC electro-hydraulic cranes are slim and low, and intended for various duties.
A standardised modular design has generated an optimised cargo handling crane with simplified maintenance through its lifetime. These cranes can be equipped with the tools needed for handling various cargoes, such as containers or bulk materials. The standard range covers lifting capacities from 36 to 45 tonnes. Outreaches are between 20-34 m.
General design:
LC cranes are designed to meet the rules of all recognised classification societies and regulatory bodies. MacGREGOR%u2019s CC2000 system ensures smooth, fast and stepless crane control. This means that, at given capacities, the cranes can operate at full speed and load using all hoisting, luffing and slewing movements at the same time.
|
|
|
|
|
|
|
General purpose crane (GP crane):
- Handle your spares and provisions in a safe and reliable way
Crane type:
GP electro-hydraulic cranes are selfcontained all-purpose cranes. Their design is robust and solid, and components are chosen for a long life even in the most hostile marine environment. The standard range covers capacities from 3 tonnes to 10 tonnes with outreaches up to 24 m. As standard, a GP crane is controlled from a platform above the slewing ring. A portable electric remote-control unit is available as an option. All crane movements are smooth and fast, with stepless speed control. Two crane motions can be used at the same time at full capacity, but with reduced speed. The product range includes hydraulic cranes for service operations, stores handling and special applications, meeting every requirement under any condition.
General design:
GP cranes are designed for a temperature range from +45°C to the lowest ambient working temperature for worldwide trading according to classification societies%u2019 requirements. All crane types utilise the same basic machinery but differ in the arrangement of components. Standardised and modularised components make it easy to build cranes with safe working loads from 3 tonnes up to 10 tonnes with outreaches up to 24 m.
|
|
|
Melcal Marine BF Series fixed box boom pedestal marine cranes, are tailor made to your requested specifications, in different boom lengths, lifting capacities and sea state conditions . All crane models can be certified by all Classification Societies.
|
|
|
The design, construction and configuration of the PKL crane make it a true alternative for ship owners. Its boom is actuated by hydraulic cylinders. Although the PKL is in principle suitable for ships of all sizes, it truly shows its advantages when used on relatively small ships.
|
|
|
The NMF DK II deck crane, a general-purpose cargo crane for containers and general cargo, is NMF’s top-ranking crane in terms of production volume.
|
|
Features:
- 2500 pound non-shock lifting capacity at maximum radius of 16'-7". The barge crane operates equally as well at 5'-6" minimum radius.
- 270" swing capacity resulting in maximum flexibility for lifting and positioning equipment.
- One man boom operation leaving other personnel free to position and secure load. Reduces time required for such tasks as hose connecting, removing pumping equipment for repairs and loading oil drums or miscellaneous equipment.
- Low silhouette. By removing backleg pins, the crane king post folds down to height of 3"-10" to minimize low bridge problems.
- Quality tested to 150% of non-shock working load.
|
|
|
The Fixed Boom SCT Series come in wide veriety of applications.
|
|
Some of the highlighting technical features of our Offshore Pedastal Deck Cranes are as follows:
- Structural Strength for High Performance: The super structure of our cranes makes them safe to operate, durable, rugged and also user friendly.
- Well Equipped Operator's Cab: The operators cab is considered as the brain of a crane unit that governs the complete functioning.
- Power Pack Cranes for Superior Performance
- Boom
- Integrated Electrical System
- Crane Mount : Structural Superiority
- Concern for Manpower: Safety System
- Quality Painting & Coating for Functional Durability
- Ensuring Quality : Inspections & Testing
|
|
|
|
|
|
|
The produced by Towimor wire luffing cargo cranes of various type are universal cranes designed for handling of various type of cargo transported on board the vessels. The cranes can be adapted for operation with grab, spreader and swivel. As a standard cargo cranes with hoisting capacity of 25-45 tons are available.
Cranes can be delivered as self-supported ones, with slewing interlocks (prepared for resting without jib support) and for special projects.
All types of cranes have a safety and convenient communication way for the crane operation, maintenance, check and overhaul purposes.
Drive elements are located inside the crane housing what limits a possibility of environment pollution in case of unexpected event (e.g. bursting of hydraulic hose).
The drive enables stepless individual or common simultaneous work of all the crane mechanisms.
Driving control is performed by use of programmable microprocessor controller In case of any interference in the crane operation the microprocessor controller displays defect which disturbs crane opreation or immobilizes the crane.
The cranes are equipped with safety devices ensuring that lack of supply or wrong operation will not cause the crane and ship damage.
In order to meet Customer's requirements above cranes can be additionally equipped with:
-air conditioning in operator cabin
-drive for operating of grab, spreader or hook turning device
-additional heating for arctic condition
-additional special equipment for special types of cargo
-adapter for deck column
-support for jib in rest positon
Extreme operational conditions in acc. with requirements of Classification Societies:
- ambient temperature -25°C+45°C
- ship heel 5°
- ship trim 2°
- design temperature -10°C
|
|
CBW cranes are designed for cargo and container handling and are distinguished through the following characteristics:
Low height enabling improved visibility from the vessel's bridge.
Low weight and centre of gravity for improved ship stability and increased cargo capacity.
Wide rope field at the hook allowing for safe and stable cargo handling (anti-swing device).
Jib arranged above operator's cabin, which provides unrestricted vision for the crane driver to deck and cargo hold.
|
|
CBB cranes are wire-luffing cranes designed for bulk and container handling with the following advantages.
Hydraulic control instead of electronic.
Jib brackets are directly integrated in jib beam for higher rigidity.
Significantly reduced forces and operating costs due to advanced reeving concept.
Wire sheaves inside beam for better protection.
|
|
TTS-LMG Cargo Cranes are designed to handle a wide variety of lifting applications.The range comprises standard design and tailor made solutions as required by the customer. The cranes are designed and built to meet all requirements from ILO as well as relevant authorities, and can be certified by any recognised Classification Society.
- all machinery inside crane tower
- all outside components maintenance free
- all cranes PLC controlled
- all operations at full load under 5° heel and 2° trim
- state of the art design
- standard range covers lifting capacities from 25 ton and higher with outreaches up to 32 m
|
|
|
TTS Cargo Cranes are designed to handle a wide variety of lifting applications. The range comprises standard designs and tailor made solutions as required by the customer. The cranes are designed and built to meet all requirements from ILO as well as relevant authorities, and can be certified by any recognised Classification Society.
|
|
|
|
Ship deck cranes
