|
|
Cooling unit (12-24-42 Volt DC automatic), fan cooled, for fridge boxes up to 450 litres, freezers up to 300 litres and combined up to 375 litres.
It employs a smart compressor GD30 FDC, by ACC (EX-ELECTROLUX), programmable manually or in "SmartSpeed", fitting automatically the speed according to the need of cold.
Available with tubes to braze or different kind of couplings.
Equipped with increased condenser (TROPIK version) for hard working conditions.
|
|
Cooling unit (12-24-42 Volt DC automatic), fan cooled, for fridge boxes up to 450 litres, freezers up to 300 litres and combined up to 375 litres.
It employs a smart compressor GD30 FDC, by ACC (EX-ELECTROLUX), programmable manually or in "SmartSpeed", fitting automatically the speed according to the need of cold.
Available with tubes to braze or different kind of couplings.
Equipped with increased condenser (TROPIK version) for hard working conditions.
|
|
PRO-HOR30
Cooling unit (12-24-42 Volt DC automatic), fan cooled, for fridge boxes up to 450 litres, freezers up to 300 litres and combined up to 375 litres.
It employs a smart compressor GD30 FDC, by ACC (EX-ELECTROLUX), programmable manually or in "SmartSpeed", fitting automatically the speed according to the need of cold.
Available with tubes to braze or different kind of couplings.
Equipped with increased condenser (TROPIK version) for hard working conditions.
|
|
GD30FDC compressor, made by ACC (EX-ELECTROLUX), can be powered at any voltage within the 12 to 42 Volt range, and it is designed to operate silently, efficiently and reliably even up to angles of tilt of 30°.
It is supplied with an electronic driver with a reliable digital technology.
With the Smart Speed function it becomes a smart system.
The compressor's speed, in fact, is regulated automatically by the smart device, that changes according to the cooling capacity needed at the moment.
It is perfectly interchangeable with the most common models.
|
|
The Micro HPStm (Hybrid Plate System) represents an entirely new kind of marine refrigeration system.
The most significant advancement in marine refrigeration technology in the past 30 years, and winner of the 2003 NMMA Innovation Award, the Micro HPS blurs the line between small, hermetically sealed DC constant-cycle units and large, high-powered DC holding plate systems. The result is a clean, compact, reliable system of unprecedented power and performance.
|
|
Plate evaporators are easily
installed and meet a host of
different cooling requirements,
thanks also to the possibility to
adapt them to the form of the
refrigerator compartment. When
installing, always make use of the
holes provided.
|
|
Cooling systems with boxed
evaporators are recommended
for all installations where a freezer
compartment is required.
These evaporators can be
positioned horizontally or
vertically according to
requirements and available space.
|
|
|
|
|
|
|
WAECO ColdMachine – maßgeschneiderte Kühllösungen für alle Einsatzzwecke
Wenn Standardgeräte nicht passen, muss individueller Kühlraum geschaffen werden. Dazu sind WAECO ColdMachine Kühlaggregate da. Dank vorgefülltem Kältemittel und selbstdichtender Ventilkupplungen eignen sie sich bestens für den Selbsteinbau. Sie stehen in drei verschiedenen Serien zur Verfügung, um jedem Anwendungsfall gerecht zu werden. ColdMachine Kühlaggregate arbeiten mit leistungsgeregelten Danfoss BDF-Kompressoren. Sie sind leistungsstark, sparsam, superleise, schräglagenunabhängig, anschlussfertig für 12/24 Volt DC. Die als Ergänzung angebotenen Verdampfer wurden optimal auf die jeweilige Kompressorleistung abgestimmt.
Leistungsangepasste Kompressoren
Jedes Kühlsystem besteht aus Kompressor, Kondensator und Verdampfer. Damit es effektiv arbeiten kann, müssen die drei Hauptkomponenten perfekt miteinander harmonieren. So sind im WAECO Programm viele unterschiedliche Kondensatoren und Verdampfer zu finden, die hier optimale Zusammenstellungen ermöglichen.
|
|
|
Danfoss compressor of the latest generation. Extremely compact dimensions. Maximum efficiency. Electrical consumption 25% lower compared to other compressor concepts...
|
|
For refrigerated compartments up to
250 l max. (freezers 100 l max.).
Danfoss BD35F compressor
with fully integrated control
unit (power 12/24V with automatic
switchover).
Air ventilation condenser cooling
unit. 2-row condenser coil with fins.
|
|
Water-cooled units
The range is completed by watercooled
units, which are suited for
marine use in areas with little
ventilation. The unit is cooled
through forced circulation of water
by an optional pump (see photo).
For refrigerated compartments up
to 250 l max. (freezers 100 l max.).
Danfoss BD35F compressor
with fully integrated control
unit (power 12/24V with automatic
switchover).
Corrosion-proof condenser,
cooled by seawater.
12V or 24V
|
|
For refrigerated compartments up
to 250 l max. (freezers 120 l max.).
Danfoss BD35F compressor
with fully integrated control
unit (power 12/24V with automatic
switchover).
Air ventilation condenser cooling
unit. Wire condenser coil.
|
|
For refrigerated compartments
up to 250 l max.
(freezers 100 l max.).
Danfoss BD35F compressor
with fully integrated control
unit (power 12/24V with automatic
switchover).
Air ventilation condenser cooling
unit. 2-row condenser coil with fins.
|
|
For refrigerated compartments up to
250 l max. (freezers 100 l max.).
Danfoss BD35F compressor
with fully integrated control
unit (power 12/24V with automatic
switchover).
Air ventilation condenser cooling
unit. 2-row condenser coil with fins.
|
|
|
Indel Webasto Marine provides a wide range of high-quality cooling units to suit every demand. Compact or using the Automatic Start Up (ASU) technology, our Isotherm cooling units are an efficient solution for fridge or freeze use.
|
|
|
Water cooling with pump saves more than 20% compared to air cooling. Self priming pump reliable and very quiet. Protected against lack of cooling water...
|
|
|
|
Refrigerating units for boat refrigerators
