|
|
The 4" diameter Workmate pedestal pole comes with an oversize 12" mounting base for those who are looking for added stability. This pedestal is a must for the working boat captain.
It comes in heights ranging from 10" to 30 ". You must specify when ordering.
This pedestal can be ordered with either the Workmate or Yachtsman footrests.
|
|
|
|
|
|
|
UPSCALE QUALITY, PREMIUM MATERIALS: Only the best materials are used in the Commander Seat Hardware System! With oversized anodized aluminum tubing, solid stainless steel slide rails, Delrin bearing rods, and CNC Machined or Precision-Cast Aluminum, the hand built Commander system makes a statement of class aboard any large boat or yacht.
ROCK SOLID, WOBBLE FREE
SWIVEL: 360 degree free rotation or positive lock in 45 degree increments - single lever operation with drag adjustment for optimal performance
SLIDE: 6" of fore and aft travel with positive locking at 1" increments. Solid 1" stainless steel slide rails with lubrication system are operated with a single lever for effortless and smooth precision operation
LIFT: Vertical travel of 4" is operated from a single lever in a lift-to-lift motion. A gas spring and lubrication system provide 112 lbs. of lift force
The Yachtsman II is available in 4 different Gas Rise Adjusting Height Systems.
For adjusting height availability please see options below.
Can be used with the Atlantis Helm Chair
|
|
model 6691
manual seat pedestal bases
Pedestal bases for manual seats are in marine grade 316L stainless steal, provide full 360° rotation and include gas-lift height adjustment with manual locking. On automatic seats all cables pass through the pedestal to the controls on the armrests.
|
|
- Stainless Steel Pedestal
- The voltage is 24 V
- Stroke is 150 mm
- Caution! The seat mounted on the pedestal can not rotate, but an additional rotation unit is available
|
|
|
Our Mariner Series of slides and swivels feature the highest quality and detail. These units are strong and sturdy and designed for those who demand a clean, neat unit that enhances the appearances of the boat it is mounted on.
|
|
The HYDROMAR HD CYLINDER is a hydraulic cylinder. The cylinder is 200 mm in height adjustable. The minimum height of the cylinder is 365 mm
A complete pedestal consist of two parts, the cylinder and a stainless steel fixed part, which is available in the height 50, 100, 150, 200, 250, 300 mm
The lever is used to pump up and lower down the pedestal as well to engage the brake for the rotation
The fixed stainless steel part is so constructed that fitting the pedestal on the Multi-Rail is very easy
Also available in complete stainless steel version
|
|
The newest seat base from Llebroc Industries, the Helmsman Bolt Down Base Stand is available in two models with variable height adjustments.
- The LLE-5410 features a 4" mounting post which is adjustable from 18" to 28".
- The LLE-5409 also has a 4" post, but adjusts from 23" to 33".
A 12-inch mounting plate bolts directly to the deck ensuring rock solid seat stability in even the roughest seas. This configuration makes it desirable for even the most luxurious boats.
Constructed of 5052-H32 1/4" thick aluminum, the entire unit is sealed against the most severe weather conditions by a black UV protected textured powder coat. The Helmsman fits all existing 4" marine hardware and seat mounts.
|
|
The newest seat base from Llebroc Industries, the Helmsman, is available in two models.
- The LLE-5407 features a 4%u201D mounting post which is adjustable from 18%u201D to 28%u201D.
- The LLE-5408 also has a 4%u201D post, but adjusts from 23%u201D to 33%u201D.
With six legs spanning 33%u201D from side to side, the Helmsman offers rock-solid stability in even the roughest water. Plus each leg has a 1-1/4" rubber foot pad for a positive grip on all surfaces. This configuration makes it desirable for even the most luxurious boats.
Constructed of 5052-H32 1/4" thick aluminum, the entire unit is protected by a black UV texture powder coat. The Helmsman fits all 4" existing marine hardware and seat mounts.
|
|
- This pedestal is completely made of stainless steel 316
- Minimum height is 395 mm
- The height adjustment is 200 mm
- The lever is used to pump up and lower down as well as to block the pedestal
|
|
|
|
|
|
|
Comfortable, practical and truly pleasant tubular chair in inox 316 AISI, studied from the BGV Turin, in collaboration with an asserted company of workings of the steel, been born for being employed to trap. Collapsible and entire smontabile for all the maintenances that had to be necessary them. Its structure, in steel renders it practically unalterable in the time and guarantees at the same time, an exceptional robustness. The tubular one of which it is composed is of dimensions, diameter 22 x 1,5 milimeter of thickness, is obviously in lucid finish. Its all up weight is of approximately 7 kg. its detail forms to the height of the braccioli, it concurs with two coupled chairs not to never make to touch the braccioli stressi, and therefore it does not exist the risk of being able itself to make badly, even to the fingers of the hand.
The sitting, the back and the braccioli, in are supplied in a double version, the skin or in roving. For all and the two versions, its piedini, instead are covered in skin, to avoid disagreeable scratches to the blanket in teck or the cauldrons. The braccioli at last, are equipped of a soft neoprene padding, of approximately 6 cm of diameter. The hides employed are typically our Nubuck of the maximum quality, and are possible, in the obvious limits of the supply, to choose also other colors, besides champagne and to the white man the usual ice.
All our chairs are personalizzabili to your pleasure, according to the tipologia with various techniques of press, embroidery or working laser.
|
|
Folding directors chair
in stainless steel 316 mirror finish
Dimensions: W.56 D.48 H.80 cm.
folded : W.13 D.48 H.80 cm.
fabric Tempotest sand or blue
|
|
60.105
Collapsible Mallorca chair in valuable wood available in the colors mahogany or teak
cm. 54x44x84 h.
|
|
Shoes basket in teak grate and marine rope.
Available in Blue or Honey color.
73 x 44 cm.
|
|
Art. 60.101
Folding stool
in massif teak
fabric sand or blue
cm. 51x38x46
Leather socks available
|
|
60.106
Collapsible Menorca stool in valuable wood available in the colors mahogany or teak
cm. 50x38x46 h.
|
|
The fixed Stainless Steel pedestal is not in height adjustable
The pedestal is delivered with a length of 1.000 mm. and can be cut at the length you wish
The seat rotates 360 degrees
|
|
Interior and exterior design accessories are customized and realized based on drawings, in order to satisfy any kind of need, both functional and aesthetic. Glass holders, map holders, small doors of various shapes and size, lockers, anchor doors, sliding roofs are some of the accessories that Parema manufactures for its customers.
Metal parts of Parema’s accessories are realized using materials (as light aluminium alloy UNI6060 or AISI SS 316) which thanks to their characteristics (intrinsic or derived from treatments) can resist in a harsh marine environment. The transparent components are in tempered glass or Plexiglas (PMMA), and Plexicor is used for work or support boards, available in any colour.
|
|
Our sub-assemblies allow you to choose your pedestal to suit your boat perfectly. Pedestals have a 70 mm diameter and are available in 6 height versions depending on how high you prefer the table (high or low position).
Finishes available : anodised aluminium or wooden aspect.
|
|
ELECTRIC TABLE PEDESTAL
Stainless steel aisi 316L
Motor 12 or 24 Volts
MAX HIGH mm 690 / MIN HIGH 340
|
|
|
|
Boat furniture : Seats, Tables, Pedestals...
