|
|
The Ultra Stiff Carbon Tubular Riggers are equipped with a carbon "cup shaped" oarlock holder that directs all the force during the drive straight down the centerline of the carbon rigger back support of the two stay rigger system. There is no twist of the oarlock during the drive.
Thus, the propelling forces, especially from the "catch" to the "stroke perpendicular", are translated through this concentric design to maximize boat speed and to minimize force dissipation through rigger flexing.
These tubular riggers are available in the top mounted and a side mounted version.
|
|
|
A beautiful cover for your shells made out of Sunbrella fabric. The enclosure is Velcro, instead of a zipper, which makes it easier and faster to get your boat into and out of this cover. And you don't have to worry about a faulty zipper making your cover virtually useless.
|
|
It's time for an ALL NEW voice for coxed boats.
It’s the Cox Box you know and love – only lighter, more durable and longer-lasting. Redesigned according to YOUR requests: switch and replace batteries in seconds and see your charge remaining. Wrap-around bumpers make your Cox-Box yours, and darn near indestructible.
|
|
Dreher Adjustable Carbon Foot stretchers are designed to custom fit almost any sculling or sweep boat from a single to an eight. We have offer families of foot stretchers with multiple plate options.
Three unique carbon foot stretcher designs provide every possible solution for light weight, stiffness, and shoe compatibility with a full range of adjustment. Dreher adjustable carbon foot stretchers in various configurations are now being used by several first tier manufacturers in North America and Europe as original equipment. These unique light weight foot stretcher designs are, durable and strong while providing excellent energy transfer. The foot stretchers are adjustable three ways: fore and aft, up and down and angle inclination. All models have shoe splay adjustability except the Tubular style. The 2006 foot plate has the greatest range of adjustability. All models have different widths of shoe placement. The Tubular and 2004 foot plates come in an angled option.
|
|
Rowing Handles Rowing come with fixed wooden handles or adjustable carbon handles.
We have designed our rowing handles with comfort and ease of use as our highest priority. Selecting a handle that is correct for you is necessary to achieve the best performance. A handle that is too small will cause trouble in the rough water and may turn in the rower’s hand uncontrollably. A handle that is too big will fatigue the rower’s forearms and also result in excessive wrist movement feathering the oar.
|
|
|
|
|
|
|
We have designed our sculling handles with comfort and ease of use as our highest priority. Selecting a handle that is correct for you is necessary to achieve the best performance. A handle that is too small will cause trouble in the rough water and may turn in the rower's hand uncontrollably. A handle that is too big will fatigue the rower's forearms and also result in excessive wrist movement feathering the oar. All our sculling handles come fitted with our injection moulded thermoplastic grips. These second-generation grips have gained universal acceptance since their release and all include an anti-bacterial agent to stop the growth of bacteria and fungus. From the initial work that we have done, there seems to be a strong correlation between hand size (measured from the base of the thumb and the tip of the fingers) and preferred grip size. We have collected enough data so that we are now able to print a simple chart relating hand size to grip size for sculling and rowing. This will enable coaches to order the most suitable handles, particularly for school rowers.
Sculling Oars can be fitted with either Carbon adjustable handles or fixed wooden handles.
|
|
The Lo-Glide single action seat is another result of our continuing program of refinement and redesign of rowing equipment. The smoothest running and most durable seat on the market – it makes you more efficient – more competitive.
|
|
|
Have you lost a seat overboard or do you have a problem with seat comfort? The Dreher Carbon seats have the same comfortable seat top, but an increased strength to weight ratio. As a result the seats weigh less and therefore have improved durability. The new medium seat top design can accommodate a track width of 16.5-23 cm. The old medium seat design can accommodate a track width of 23-28 cm. The large seat top design can take a track width of 23-30 cm. The seats are made with three size of aluminum seat seat supports (1.75 cm, 2.25 cm or 3.25 cm). The nylon seat support comes only in low height (1.75 cm).
|
|
Surf Handles...
We have designed our surf handles with comfort and ease of use as our highest priority. We have standard timber and carbon handles available on all surf oars. Recently we have released two sizes in our carbon handle range. The carbon handles have been largely accepted since their release for numerous reasons; they are strong, stiff and thinner than the timber handle. The carbon handle is extremely easy to replace if broken or damaged. All carbon handles are fitted with a blue foam rubber, which contains an anti-bacterial agent that last for the life of the rubber. The sanitising process is effective against a large number of bacteria and fungi.
|
|
|
RB2 track profile is designed to keep the system low, light and compact. Manufactured from black anodised aluminium, it is both strong and extremely light. However, if it is necessary to run over an unsupported area, some form of bridge should be utilised. RB2 Track must be fully supported in all applications. See table for available lengths. (Short Travellers contain 44 ball bearings, long Travellers 64)
|
|
|
|
|
|
|
Slick Rowing Blade –
Slick OarThe Slick Rowing Blade is normally assembled with a 70mm hook. This provides enough load for the strongest crews but the asymmetric curvature of the blade makes it extremely clean in and out of the water. The blade can be reduced in size for women and schoolgirls. The Slick Rowing Blade is available on all shafts.The Slick Rowing Blade is the latest CAD CAM computer generated design that supersedes all other blade shapes. The Slick Blade is now available with closed edges, which improves the blades durability and overall performance.
The Slick Blade has no ridgeline so there is less splash at the catch. The low volume blade enters the water quickly and quietly and floats low in the water. The longitudinal curvature is perpendicular to the tip and so is in line with the flow of water. It has a constant pitch across the tip and all lines parallel to the tip.
The gentle asymmetric curvature of the blade assures a clean release from the water with every stroke. Slick Blades are visibly cleaner than other blades.The Slick Blade does not exhibit any negative tendencies during recovery or in bad weather. Since the Slick Blades introduction it has been extremely successful at all levels of rowing.
|
|
|
|
|
|
|
Slick Sculling Blade -
The Slick Sculling Blade in normally assembled with a 40mm hook. A smaller blade is available for women and schoolgirls who want slightly lighter load at the catch. Slick Blades are available on all shafts.
The Slick Blade is the latest CAD CAM computer generated design that supersedes all other blade shapes. The Slick Blade is now available with closed edges, which improves the blades durability and overall performance.
The Slick Blade has no ridgeline so there is less splash at the catch. The low volume blade enters the water quickly and quietly and floats low in the water. The longitudinal curvature is perpendicular to the tip and so is in line with the flow of water. It has a constant pitch across the tip and all lines parallel to the tip.
The gentle asymmetric curvature of the blade assures a clean release from the water with every stroke. Slick Blades are visibly cleaner than other blades.The Slick Blade does not exhibit any negative tendencies during recovery or in bad weather. Since the Slick Blades introduction it has been extremely successful at all levels of rowing.
|
|
Surf Blades ...
Standard surf oar blades
The Standard Surf Oar blade is designed with a prominent ridgeline and 100mm hook. These blades are similar in shape to their timber predecessors.
This blade design has been around for the past 10 years, ample time to prove its durability and strength. The unpredictable nature of surfboat rowing places tremendous stress on the components of the oar.Those carbon composite blades have proven themselves up to the challenge.This blade is now available with closed edges, which improves the blades durability and overall performance.The Surf blade is standard issue on all oars and great for all level of rowers.
|
|
|
|
Rowing accessories
