|
|
Propellers have two basic dimensions; diameter & pitch. Diameter is the distance measured across the propeller hub line from the outer edge of the circle that is made by the propellerÕs blades during rotation. Pitch is the distance that a boat will travel if rotated one revolution without any slippage. When describing a propeller both the diameter and pitch are given. The diameter is referenced first and the pitch is second. Therefore, a 12'' x 9'' propeller would have a 12-inch diameter and a 9-inch blade pitch.
|
|
| Over the last several years, inquiries from, both, our U.S. and global markets have indicated a demand for an alternate source for higher quality aluminum propellers. Currently, a full line of Aluminum Propellers are available to fit 9.9HP thru 300HP to include I/Os. These propellers are intended as OEM replacements with OEM equivalent geometries. Using these OEM equivalent geometries ensures equivalent performance and rpm parity with the original propellers. To ensure strength and long service life, we produce these propellers using a low pressure casting process and a high quality aluminum alloy. This combination provides a propeller with the capability of being easily welded/repaired, a capability traditional die cast alloys simply cannot match. |
|
Propellers have two basic dimensions; diameter & pitch. Diameter is the distance measured across the propeller hub line from the outer edge of the circle that is made by the propellerÕs blades during rotation. Pitch is the distance that a boat will travel if rotated one revolution without any slippage. When describing a propeller both the diameter and pitch are given. The diameter is referenced first and the pitch is second. Therefore, a 12'' x 9'' propeller would have a 12-inch diameter and a 9-inch blade pitch.
|
|
New designs, better speeds, better handling, and saves fuel. The best propellers for lower horspower pontoon, fishing and work boats!
Mid-Range Series
40 - 75hp
w/ a 3-1/2" gearcase |
|
The new Patriot Series includes the industrys top performing stainless steel designs perfect for Runabouts, Pontoon, and Fishing Boats.
This series includes counter rotation 3 blades, Suzuki DF90, DF115, DF140 specific 14� propellers, and 4 blades for 6 & 8 cylinder engines.
Patriotpropellers incorporate a square hub design that is compatible with our MasterTORQUE™ Hub System as well as Michigan Wheel®�s XHS® and Mercury®�s Flo Torq® hubs. |
|
Express stainless steel propellers are the perfect propeller for bass, walleye, family fishing, offshore boats, run-a-bouts, and weekenders.
Express gives boats maximum speed and secure handling on tight turns at wide open throttle.
Do you use your boat for waterskiing, tubing, or putting extra people on board for a cruise around the lake or down the river? Purchase a 2 nd propeller at a lower pitch to help compensate for the added weight and drag. You will notice a big improvement in how your boat performs under those conditions.
Don't forget you can carry a spare Hustler aluminum propeller that will adapt to the same hub. |
|
Large diameter stainless steel propellers specifically designed for Offshore, Bay, and Cabin Cruiser boats. Available in 4 blade and counter-rotation designs. This series also includes Suzuki specific 16� diameter propellers.
Voyagerpropellers incorporate a �square hub� design that is compatible with our MasterTORQUE™ Hub System as well as Michigan Wheel®�s XHS® and Mercury®�s Flo Torq® hubs. |
|
Using the same High Performance Stainless Steel blade patterns as our aluminum Hustler� series, Legacy propellers incorporate a �square hub� design that is compatible with our MasterTORQUE Hub System as well as Michigan Wheel®�s XHS® and Mercury®�s Flo Torq® hubs.
Now you can upgrade your propeller to a Legacy and not have to purchase a new hub!
With Legacy, you can expect faster top end speeds, quicker hole shot, great lift, and secure handling even on tight WOT turns. The best overall running aluminum propeller available! We've fine tuned our designs to maximize the total performance of your boat. |
|
The Rascal aluminum portable and compact series propellers feature new blade designs that provide better all around performance. Rascal propellers have increased blade area and more aggressive propeller pitch progression that helps low horsepower engines maximize a boat's total performance.
Rascal aluminum propellers increase the performance that OEM and other aftermarket propellers provide. A fined tuned cupping design ensure great handling and virtually eliminates ventilation problems. Each Rascal aluminum propeller utilizes the industry leading MasterGuard Hub System that absorbs harmful vibrations and shift shock. The MasterGuard Hub System will also save you money - only buy the propeller for furture purchases! |
|
Patterned from after stainless steel designs, these props give a new meaning to the word hustle. High top end speeds, quick hole shot, great lift, and secure handling even on tight WOT Turns.The best overall running aluminum propeller available!
As we constantly test and upgrade our own designs, you're sure to get a great running propeller with Hustler. We've fine tuned our designs to maximize the total performance of your boat.
Do you use your boat for waterskiing, tubing, or putting extra people on board for a cruise around the lake or down the river? Purchase a 2 nd propeller at a lower pitch to help compensate for the added weight and drag. You will notice a big improvement in how your boat performs under those conditions.
High Performance Series
40 - 300hp
w/ 4-1/4" and 4-3/4" gearcases |
|
Since the summer of 2007, inquiries from, both, our U.S. and global markets indicated a high demand for an alternate source of high quality stainless replacement propellers for the New Yamaha 350HP 4/stroke Motor. Currently, a full family of these products is available to include 3, 4, or 5-blades, left & right hand rotation, pitch ranges from 15 to 28 in 15.25 or 16.00 inches in diameter.
Due to heat exhaust and heavy torque loads on today’s propellers, the PowerTech Propeller for the Ym 350HP 4/stroke has the Cushion Lok Hub, specifically designed as a premium alternative to the classic press-in rubber hub. It allows for super soft forward and reverse engagement, maximum drive train protection, and is failure resistant.
E-mail: Sales@ptprop.com -- Dealers Welcome -- www.ptprop.com.
|
|
SpeedZone propellers take the next step in high performance to best harness the power of high performance bass boats and powerful sterndrives. Greater blade area and more aggressive design features deliver optimum acceleration and top end speed.
Get maximum exhaust flow for higher horsepower with our MasterGuard Hub System. The durable design won't leave you stranded with a spun hub during an important fishing outing. Carry an inexpensive spare Hustler aluminum propeller as a backup or to get into the real shallow waters you normally wouldn't want to run a stainless steel propeller. |
|
| Sizes: A3, A4, A5, A6, A7, B3, B4, B5, B6 -- Over the last several years, inquiries from, both, our U.S. and global markets have indicated a demand for an alternate source for higher quality aluminum replacement propellers designed to fit Volvo Duoprop outdrives. During the coming months, a full family of these products will be available. As part of our family of Match Series propellers, these propellers are intended as direct OEM replacements for the Volvo Duoprop propellers, and as such, use OEM equivalent geometries. Using these OEM equivalent geometries ensures equivalent performance and rpm parity with the original propellers. To ensure strength and long service life, we produce these propellers using a low pressure casting process and a high quality aluminum alloy. This combination provides a propeller with the capability of being easily welded/repaired, a capability traditional die cast alloys simply cannot match. ---- NOTE: A-3, A-4, B-3 available soon, please call 800 736-7767 or E-MAIL: SALES@PTPROP.COM for exact dates. |
|
Due to the massive influx of low cost/low quality stainless propellers imported from (well, you know where), we have developed a line of propellers (R & X-Series) that are price-point competitive WITHOUT sacrificing the PowerTech quality or steel strength.
- The R-Series blade style is similar to the Rapture/Ballistic/Stiletto, best all purpose propeller with high rake and hard wall “L” cup, available for Class D & E Motors. It has a constant 13.25 or 14.25 inch diameter (regardless of pitch), available in 13 - 23 inches of pitch, right & left hand rotation, with a square hub cavity to receive the Vortex/Flo-Torq style hub kits. ** Suggested Retail (USD): $342.00 (Class D) and $364.00 (Class E) **
- The X-Series has been developed as an alternative to the Apollo and other less expensive imported propellers. Available for Class D & E Motors, 15 - 21 inches of pitch, right hand rotation with a square hub cavity to receive the Vortex/Flo-Torq style hub kits.
** Suggested Retail (USD): $284.00 (Class D) and $304.00 (Class E) **
E-Mail: Sales@ptprop.com -- Dealers Welcome
|
|
| ... products without information |
| |
|
|
Out-board and sterndrive propellers
