|
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
POLYAMIDE Reference SYSTEM: SCPYL002
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without marine piles)
- 1 Support case for boats of arrangement
- 2 Collars 12/20 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
100 X 100 mm Height 280 mm
Assembly of the Vertical or Horizontal reserve
by directing the following float locates
Exit connection 1/2 GASES Female
Allows various diameters of pipes, delivered with tail
grooved for diameter 16 mm
FOR GASOLINE AND FUEL OIL |
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
STAINLESS SYSTEM 316 L Reference: SCI02002 - SCI02003
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without marine piles)
- 1 Support case for boats of arrangement
- 2 Collars 25/40 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
120 mm X 80 mm X. 220 mm
Exit connection 1/2 GASES Female ref.: SCI02002
Exit connection 1 ' GAS Female ref.: SCI02003
Allows various diameters of pipes, delivered without
grooved tail.
AS A TANK FUEL OIL ONLY HAS |
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank for boat.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
POLYAMIDE Reference SYSTEM: SCPYL001
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable for boats of 2.50 m (delivered without marine piles)
- 1 Support case for boat of arrangement
- 1 Support holds with collar 510 mm
- 2 Collars 12/20 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
Diameter 135 mm Height 280 mm
For a pipe for boat of exit towards the vent of 14 mm
AS A TANK FUEL OIL FOR BOAT ONLY HAS |
|
The technique of storing and transporting liquids through the use of flexible marine tanks has many advantages :
· lightness
· handiness
· adaptability
· fiability
NAUTA® FLEXIBLE TANKS provide many advantages over rigid tanks and have therefore, become very popular with both yacht-builders and boat owners.
Each of these tanks uses an extremely rugged 935-dtex nylon fabric, coated on both sides with a neoprene / nitrile compound.
Heavily lapped seams are inside-reinforced with a “doubler” to provide extra strength. All NAUTA® tanks are vulcanised to assure leakproof boat panels and seams for years of trouble-tree service.
Because of their flexibility and the NAUTA® range of sizes, these tanks can fit into almost any space, especially those odd-shaped places that would otherwise be wasted.
NAUTA® tanks are very easy to work with. Several for water and holding are available with fittings already installed. But NAUTA® ‘s construction allows custom placement of fittings to boat suit your particular requirements and makes it simple to install them ( See Fittings for Nauta Flexible Tank )
|
|
These marine fuel tank are constructed of High-quality and UL approved.
The 25L (6.6-gallon) tank for boat includes cap and fuel level gauge. The 12L (3.1-gallon) tank has not fuel level gauge.
|
|
See-thru tank for boat makes fuel level visible from any angle. Tank includes vented cap, filtered pick-up tube, and gas line coupling for 1/4" NPT fittings. 21" L x 11-1/2" W x 9-1/2" H. Adapts to all outboard engines for boats. Massachusetts Fire Marshal Approval Number PC-156. Meets both ABYC and CSA.
|
|
| CE marked boat fuel tanks suitable for petrol and diesel. Manufactured from High Density Polyethylene. These tanks for boats are red in colour and come complete with inspection hatch, filler cap with vent and an 10mm fitting with pickup pipe for fuel feed. A fuel return may also be fitted. If you prefer there is a separate vent fitting located next to the feed. This is a 1/2" hose tail. |
|
Designed to store fuel or drinking water.
Thanks to its slim shape it is easy to stow and it occupies a minimum of space.
High-density polyethylene.
Neutral colour tank for boats for the storage of drinking water.
Grey tank for the storage of any kind of fuel. |
|
These marine fuel tank are constructed of High-quality and UL approved.
The 25L (6.6-gallon) tank for boat includes cap and fuel level gauge. The 12L (3.1-gallon) tank has not fuel level gauge.
|
|
Chrome-plated zinc vents with spark-proof screened holes.
All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations.
|
|
The Diesel Caddy meets all current U.N. and D.O.T. specifications when used according to Todd’s instructions for transporting fuel. All Caddies bear the UN Marking, “UN3H1W”. U.S. Patent #5667113
Diesel Caddies hold 28 Gallons of fuel and meet DOT requirements. Features include 10 Feet (305cm) of U.L. approved hose with static wire, molded hose brackets, U.L. approved, spring loaded nozzle, 3/4" U.L. approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings for boats, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. Optional pump for boat kit is available to transfer fuel easily above the height of the caddy.
Dimensions D W H
22 1/2" 27 1/2" 41"
Part #: P93-2401 |
|
The Gas Caddy meets all current U.N. and D.O.T. specifications when used according to Todd’s instructions for transporting fuel. All Caddies bear the UN Marking, “UN3H1W”. U.S. Patent #5667113
Gas Caddies hold 28 Gallons of fuel and meet DOT requirements. Features include 10 Feet (305cm) of U.L. approved hose with static wire, molded hose brackets, U.L. approved, spring loaded nozzle, 3/4" U.L. approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings for boats, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. Optional boat pump kit is available to transfer fuel easily above the height of the caddy.
Dimensions D W H
22 1/2" 27 1/2" 41"
Part #: P93-2400 |
|
| ... products without information |
| |
|
|
Fuel tanks
