|
|
Racor now offers replacement filters for marine applications. These filters are direct replacements for the intake air filter portion of vairous brands of air filters/silencers
|
|
Eliminate Fuel Vent Line Overflow During Refueling
Next time you fill up, watch your fuel vent line. A typical refueling will send up to a half gallon or more of fuel spilling overboard. Fuel spillage is not only expensive, it's absolutely deadly to fragile lakes, rivers and waterways. USCG and other regulations prohibit the discharge of oils including civil and criminal penalties.
Installed in the fuel tank vent line, the Racor Fuel/Air Separator efficiently separates air from fuel forced into the line. Air is vented, and all fuel is returned to the tank. The Fuel/Air Separator captures fuel normally discharged due to agitation and thermal expansion up to 2.4 PSI. It also eliminates damage to expensive striping and labels and protects finishes from fuel stains. The unit is maintenance free -- there's nothing to rust or corrode.
The Racor Fuel/Air Separator fits neatly into your vent line, actually replacing a section of the line. One Fuel/Air Separator unit is required for each vent line, both models fit 5/8" vent lines. Fittings are included.
|
|
Legendary Diesel Filtration
When engines demand heavy duty, high capacity water separation and fuel filtration, the Turbine Series is the most complete, efficient and reliable engine protection you can install. Symbolizing Racor's continuing commitment to the science of filtration, the Turbine Series has established its position as the filter/separator often imitated, but never equaled. Models which include an aluminum bowl or staineless steel shield meet ASTM FS1201 certification, are UL-Listed, American Bureau of Shipping, Veritas, Det Norske Veritas, ISO 10088 and U.S.C.G. accepted. For severe service, all-metal bowls should be specified.
|
|
Cost Effective Visual Inspection
Cost effective designs for on engine or remote mounting. Complete assemblies or direct engine spin-on filters. Available with see-thru or all metal bowls.
High Capacity
Hand operated fuel priming pumps are integral to many Racor diesel spin-on series models. A feature that allows for the removal of unwanted air from the filter and the engine fuel system.
Environmentally Friendly
Engeineered polymer bowls are reusable, impact-resistant and virtually indestructible. When it's time for service, only the filter element is replaced -- the see-thru bowl and drain valve assembly are reused. The long life-cycle of the bowl saves money and reduces the environmental impact through disposal fo less material. Use metal bowl versions for inspected or commerical vessels.
Easy Upgrades
See-thru bowls provide connection ports for upgrades which enhance engine performance and reliability. Powerful in-bowl heaters can be added to improve operation in colder climates and electronic sensors alert the operator to drain the water in the bowl. |
|
Diesel fuels often contain micro orga-nisms. When temperature and water content is in harmony the microbes can grow uncontrolled giving you problems with a clogged fuel system and restric-ted fuel flow.
The QL fuel decontaminator works through a patented magnetic system. When the fuel passes through a system of magnets the micro organisms are kil-led and broken down to small particles that easily pass through the fuel filter and then burn in the engine combustion.
The QL fuel decontaminator is installed between the tank and the fuel filter. Once installed, it works continuosly with very little attention.
Correctly installed, before the fuel return feed, it will also clean the content in the fuel tank. In this way the return feed recirculates fuel back to the fuel tank via the fuel decontaminator, and up to 97% of the micro organisms are broken down each time it passes through. The QL fuel decontaminator offers a permanent solu-tion to the problem of micro organisms in the fuel."
|
|
The Racor Fuel Filter Funnel (RFF)
family is a new heavy-duty, fast-flow,
filter-in-a-funnel that separates damaging
free water and contaminates
from gasoline, diesel, heating oil, and
kerosene.
The new RFF family of products are
capable of removing free water and
solids down to .005 or .003 inch and
allows you to visually inspect the integrity
of your fuel supply as you refuel.
Dirt and water are practically unavoidable
in stored fuel, causing microbial
growth, corrosive acids, electrolysis,
and rust. These contaminants
can plug filters, corrode components,
decrease efficient combustion,
and can cause engine shutdown
or system failure. |
|
Reservoir breather filters provide precision hydraulic components with special protection against wear particles and destructive moisture. The use of reservoir breather filters is especially critical in high humidity areas or where moisture is present near hydraulic systems. Racor reservoir breathers contain a unique filter media which removes both dirt and moisture. The spin-on design provides ease of service. Consult factory for details.
|
|
Being on the water is fun, having water in your fuel is not. And more than ever today's high performance gasoline inboard and outboard engines require clean, dry fuel. Standard spin-on filters simply don't offer the improved features and peace-of-mind that come with quality Racor fuel filter/water separators.
Clear contaminant collection bowl with drain valve for outboards
Ten micron Aquabloc media
Long life with 98% efficiency
Corrosion-resistant construction
Metal bowl units inboard powered boats meet 33 CFR and USCG standards
Meets ABYC standard H-23 |
|
Now, engine owners have the opportunity to combine the Racor LFS with a highly efficient, environmnetally safe Bypass Oil Filtration System.
The Racor Bypass Oil Series removes dirt, varnish, ash, tar, soot and other contaminants that full-flow filters cannot remove from your engine's oil. The system also removes condensed water, which forms damaging acids if it remains in the oil.
The Bypass Oil Series filter element is 1 micron filter element. With surface filters, particles tend to stack up on a single plane, thereby "loading" the filter and cutting off flow. The Bypass Oil Series filter element is a "depth" filter trapping different size particles at varying depths within the element, so loading is virtually eliminated.
Extended oil changes are possible with a Racor Bypass Oil LFS and regular oil analysis. Analysis provides important information about the condition of the oil and when it needs to be changed. It eliminates relying on "recommended change intervals" which are based on standard, full-flow filters.
By extracting samples of engine oil at predetermined intervals, a record can be established based on the actual condition of the engine and the oil.
|
|
| ... products without information |
| |
|
|