|
|
A quick-drying epoxy filler for long lasting repairs to small areas on suitably primed GRP, metals and rigid wood constructions.
Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman. This super–smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes at up to 2cm depth per application.
Watertite has excellent resistance to water penetration.
|
|
WATERTIGHT EPOXY FILLER
Fast drying
|
|
|
QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 25°C (77°F) QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round-the-clock basis.
|
|
TIKAL FAST PATCH is a 2 component, quick hardening epoxy putty for boat building materials such as GRP, wood, steel or aluminum in the overwater and underwater area.
TIKAL FAST PATCH is easy to mix and is also suitable for the restoration of osmosis damage due to its minimal water absorption.
TIKAL FAST PATCH is excellent for quick repairs and profiling work in small areas.
TIKAL FAST PATCH can also be used due to its light visual hardening on most boat hulls as quicker repair putty.
Storage: 12 months in the original closed container
Processing temp.: +5 °C to +35 °C
Working life: 20 minutes
Hardening time: 3 h, depending on the temperature
|
|
|
Resistant to weathering, saltwater, and stresses caused by joint movement. Seals between mechanically fastened joints on wood, fiberglass, metal and most plastics above and below the waterline.
|
|
One component, elastic, UV- and abrasion resistant, water vapour permeable polyurethane - coating for wood, metal and plastics. This product can be coloured with our COELAN® - COLOUR-PASTE.
approx.. 1000 ml/m²
|
|
Should only be applied in a final layer as a finishing coat on gloss boat coating when a silk-finish surface is desired. Due to the increased danger of skidding the silk-finish material should not be applied on walking areas of decks. Also should not be pigmented with our COLOUR-PASTE!
ca. 200 ml/m²
750 ml tin
|
|
A polyester filler ideal for quick filling of minor scratches and imperfections on any rigid substrate in areas above the waterline. It should be applied directly onto bare or painted GRP and wood or steel after suitable preparation and priming has been carried out.
Interfill® 200 is compatible with both single and 2-pack paints so it can be used with any International paint scheme.
|
|
| ... products without information |
| |
|
|
Fillers, Putty
