|
|
|
Rubber tape made especially to provide extra grip. Extremely resistant to UV lights and sea water. It can be removed easily without leaving any sticky residue.
|
|
TBS SPEED GRIP : lightweight self-adhesive non slip covering for racing yachts, sailing dinghy.
This micro-alveolate elastomer has a very high coefficient of friction, which allows to keep foot in position.
|
|
Adhesive tape : a wide choice of thicknesses, packaging until 1.28ml of wide and colours.
Different applications : footbridge, roof, cockpit, boat deck, descent of cockpit...
|
|
TBS Non-slip adhesive tape packaging in retail sleeve.
Wide choice of references, sizes and colours.
|
|
|
TBS Transparent self-adhesive, thickness 1mm, recommended to keep the apparance of your surfaces such as glazed wood, boat deck...
|
|
|
Thanks to these special forms grooves in the accession of the bands is much better than competing systems. The product is deliberately flexible, it will readily embrace the curvatures of the surface on which it poses, it is evident that the support surfaces are properly aligned and fair so that marking is visible.
|
|
|
This mineral coated, slip resistant material features a highly durable surface. Low profile design reduces trip hazard.
|
|
|
StepSafe™ will retain its grip wet or dry, and is resistant to gas, oil, and UV rays, We've combined Toughtek™ with a soft padded feature for a safe, secure climb aboard. Also great for the pool area, aluminum ladders, or any surface where slipping is a concern. Comes with a pressure sensitive backing for easy installation, and trims easily with scissors to almost any size and shape. Use on Gunnels, Swim platforms, Stair Rungs, Transoms or Anywhere you step and could slip! 12 Pack master comes pre-packed clipped on a clip strip.
|
|
|
Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates.
|
|
NAUTIX GRIP :Transparent non skid paint
|
|
Rust-Oleum Marine Coatings Anti-Slip Additive mixes with oil- or latex-based paints. Apply to wood, metal, fiberglass or concrete. Provides a skid-resistant coating that won’t change the color, performance or properties of paints.
PRODUCT FEATURES:
- Provides a skid-resistant coating for wood, metal, fiberglass and concrete surfaces
- Will not change the color, performance or properties of the paint
- Fine pumice for mixing with oil or latex-based paints
|
|
|
TBS offer a complete range of non slip covering answering to expectations and restraint thicknesses, 2 laying process and 12 colours.
|
|
Developed specifically for the decks of boats (our Teck is now used in ZODIAC, Alubat, Alliaura, ALINGHI ...), which must be resistant to weather and water, our flooring also used on parts of land ( terrace Stairs, pool , Tiled, private dock, spa, veranda, balcony ) Where wet soil outside generates significant risk of slipping and falling.
The resulting surface flexible can also be raised and pasted bathroom.
|
|
|
Main uses: non-slip areas (boat deck, ladders,..). Packaging: 1100x1100x35mm. Thickness from 2 to 12 mm. We suggest termoformed finishing in order to increase non-slip effect
|
|
Hydro-Turf Cut Groove 40" x 62"
Part Number: SHT40CG
Sheet of 1/4" (5.5mm) Cut Groove Hydro-Turf. Available in all our colors. Sheets may have some small holes. This is a natural occurace in EVA material. Add 3M self-adhesive for $25.
|
|
- However, the teak is not an ideal solution: read the articles here ...
- there are teak and teak a teak nobleman of high quality now costs very expensive!
between a teak type DIY supermarket and a Burmese Teak selected to manufacture bridges Yachts, there is little comparison.
- like all wood, teak is alive, he faults (knots), there are risks of delamination and we know of new boats built by renowned sites that have problems after a season of navigation.
|
|
| ... products without information |
| |
|
|
Anti-slip materials
