|
|
- Compact and independent vacuum plant
- Security of use with 2 vacuum pumps
- Different available regulation modes |
|
- Compact and independent vacuum plant
- Lubricated rotary vanes vacuum pump
- Regulation by mechanical vacuum switch
- Starting board and integrated hour meter |
|
- Static vacuum plant with 2 vacuum levels
- Lubricated rotary vanes vacuum pump
- Running with vacuum switch for maxi vacuum and with vacuum operated solenoid valve for regulated vacuum
- Activated carbon filter for odors and aggressive vapour removal
- Several outlets for maxi and regulated vacuum |
|
- Compact and independent vacuum plant
- Security of use with 2 vacuum pumps
- Different available regulation modes |
|
- Fixed production station with dual vacuum level (-900 and - 500 mbar)
- Lubricated rotary vane vacuum pumps
- 100 L tanks in P.E.T. (Polyethylene)
- Active charcoal filter to inhibit invasive smells and vapours
- Several outlets available on each tank |
|
- Double-staged lubricated piston compressor
- Simplified maintenance
- Reliability
- Reduced vibration and noise levels |
|
Range mbar: 0 to 1300 mbar absolute
Overpressure: max 4 bar absolute
Resolution: 1 mbar
Accuracy: +/- 0.2% FS typical hysteresis and non-linearity
Connection: 6mm external, 4mm internal tubing
Display: Min, max, hold, tare, sea level-altitude correction
Units: mbar, bar, Pa, kPa, MPa, mmHg, PSI
Working temp: 0 to 50° C
Power: 9V battery included, additional power connector
Dimensions: 142 x 71 x 26mm sensor 11mm |
|
Normal sensitivity: -80db/volt/microbar
Frequency response: 38 to 42 kHz
Display: Ten element bar graph
Audio output: 0 to 4 kHz
Power: 9V battery
Battery life: 15 hours continuous
Headset: Dynamic 32 ohm with volume control
Dimensions: 116 x 61 x 21 mm
Housing: Durable PVC/aluminium |
|
- Mobile vacuum plant with 2 vacuum levels
- Lubricated rotary vanes vacuum pump
- Running with vacuum switch for maxi vacuum and with vacuum operated solenoid valve for regulated vacuum
- Activated carbon filter for odors and aggressive vapour removal
- Several outlets for maxi and regulated vacuum |
|
Utility vacuum, generally suitable for a multitude of applications, such as vacuum bagging,vacuum assisted resin infusion and vacuum clamping.
The Vacmobile Quickdraw mobile system comprises two distinct pumps, a high flow low vacuum
exhauster and a low flow high vacuum pump. While a single phase powered machine which can conveniently be operated from any standard 10 amp power board, it provides the same initial pumping performance of a large 2.2kW three phase rotary vane vacuum pump!
The Quickdraw exhauster allows continuous operation at poor vacuum levels (from nil vacuum to 70%), ideal for debulking and forming an initial bag seal. Once bag positioning is complete and leaks are eliminated, the high vacuum rotary vane pump can then be set to automatically activate to achieve bagging or infusion vacuum levels, up to 99.8%. The operator can run either of the two pumps selectively, or as a combination described above when a high ultimate vacuum is required. The Quickdraw package also includes a multi-port manifold with integrated filter, vacuum regulation valve, vacuum indicator gauge, electrical control panel and hour-run meter. |
|
The Vacmobile VB series were originally designed for vacuum bagging applications. With the addition of one or more of our accessory resin traps, they are also ideal for resin infusion. They may be used as a vacuum source for vacuum clamping and lifting.
The VB series machines are built from a series of modular components which can be customised around vacuum pumps of capacities up to 160 m3/h (and even larger if appropriate). Depending on the pump model, electrical systems can be single or 3 phase. The very rugged manifold/filter units can be customised to suit individual requirements. |
|
RTM light composite manufacturing process. Independently controlled vacuum levels allow tuning to suit each mold/laminate. The Dual-vac is efficiently sized and can supply vacuum to multiple molds. The mobile system can also be used for other composites manufacturing processes, such as vacuum bagging or resin infusion (with optional accessories). The Vacmobile Dual-vac comprises two dedicated vacuum pumps, one for clamping the mold and the other to aid the resin transfer process. Also included are twin vacuum regulation valves,
pre-filter units, vacuum indicator gauges, electrical control panel and hour-run meter. |
|
- Mobile vacuum plant with 2 vacuum levels
- Lubricated rotary vanes vacuum pump
- Running with vacuum switch for maxi vacuum and with vacuum operated solenoid valve for regulated vacuum
- Activated carbon filter for odors and aggressive vapour removal
- Several outlets for maxi and regulated vacuum |
|
Composite manufacturing processes such as resin infusion and vacuum bagging. The Vacmobile 20/2 is also an ideal vacuum source for most vacuum clamping and lifting duties.
The Infusion 20/2 system is complete with an integral resin trap and provides excellent performance from a compact package. All vacuum joints are very heavy duty to ensure vacuum integrity over a long working life. The machine's normal working height can be reduced to 602 mm (23.7") for transport in most station wagons, making it ideal for transport between different work locations or for off-site repair work. |
|
| VADS is the first direct-drive dry-running screw. With integrated speed controlling for demand-oriented applications and no need for a drive transmission, VADS is truly a Becker innovation! This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return valve, intake filter, sound absorbers and ventilation/bleed system. An air blast cooler is also available. |
|
| Simplicity of design with only one shaft and direct drive produces robust, long-lasting compressors with low maintenance and running costs. These compressors operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filters and control valves, these compressors can be fitted with other accessories without a problem. The blast-air cooler, which is also integrated, guarantees a very low blast air temperature. The compact cover ensures low noise and heat emission. Optional corrosion protection also makes these compressors suitable for extracting moist air. |
|
| Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs. These vacuum pumps operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filters and control valves, these vacuum pumps can be fitted with other accessories without a problem. The compact cover ensures low noise and heat emission. Optional corrosion protection also makes these vacuum pumps suitable for extracting moist air. |
|
| Simplicity of design with only one shaft and direct drive produces robust, long-lasting compressors with low maintenance and running costs. The vanes are sealed by the metered supply of oil delivered by oil pump. The integrated, efficient oil Separation System provides the capability of producing blast air that is virtually free of oil. The cover minimises noise emission and permits application even in difficult ambient conditions. |
|
| Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs. The vanes are sealed by the metered supply of oil. Already equipped with integrated non-return valves and an efficient oil Separation system, these vacuum pumps can be fitted with other accessories without a problem. The standard-featured circulating-oil lubrication System with integrated oil cooler and cover additionally minimise noise emission. Controlled by a float valve, the oil return suction system also makes these vacuum pumps suitable for use in rough-vacuum applications. Optional water cooling significantly prolongs the life of the oil, even in difficult ambient conditions. |
|
- Lubricated rotary vanes vacuum pumps
- Available versions: 3 and 25 mbar absolute
- Integrated suction filter
- 2 suction holes |
|
- Lubricated rotary vanes vacuum pumps
- Standardization of spare parts for an easier maintenance
- Possibility to have a personalized covering plate
- Continuous running from atmospheric pressure to end vacuum
- Air cooling
- Standard motor coupling
- IP 55 Motor - F class |
|
- Lubricated screw compressor
- Max. pressure : 10 bar
- Low noise level
- Small overall base size
- Reduced maintenance |
|
| Driven directly by an integrated frequency inverter, these pumps no longer require any drive transmission. The area in which the units work is 100% oil-free. The integrated speed governor optimises the use of energy by matching delivery to actual demand. This creates high efficiency levels and minimises energy consumption. Suction air remains pulsation-free all of the time. Various accessories, such as intake filter, non-return valve, sound absorbers as well as the air delivery and discharge system, are integrated in the completely soundproof cover structure. |
|
The VADS 1500 is a direct drive, air-cooled, rotary screw unit housed in a sound enclosure. Because it is directly driven, there are no gear boxes needed to control the rotational speed. Due to the variable frequency controller, the pump operates over a wide range of speeds. This allows you to operate today at the lower frequency, and at a higher frequency tomorrow when your plant gets expanded, or you add equipment. If your load varies, so does the speed of the pump to maintain the proper flow or pressure.
Dry operation
Direct drive - No drive transmission
Variable speed controlled
2.1 speed regulation
Sound enclosure standard |
|
| Using "multi-stage" compression, side channel vacuum pumps generate low-pulsation suction air. Perfected impeller design with curved blades guarantees Optimum efficiency. Separation of the compression chambers on both sides of the impeller permits single-stage, twin-flow as well as two-stage, single-flow operation with only one impeller. Vacuum filter and vacuum safety valve can be integrated as an optional extra in the patented design of the sound absorbers. The sound absorbers can be varied in length, affording flexible adjustment to available installation space. |
|
| The sound insulation of our hoods is approx. 10-18 db(A). For better ventilation, our hoods are equipped with additional fans (1~ 230 V). These hoods are available as complete units including vacuum pumps (compressors) or equipped for retrofitting of your existing vacuum pumps (compressors). |
|
Composite small-component manufacturing processes such as resin infusion and vacuum bagging.
This starter kit comes complete with an industrial vacuum pump, pump isolation valve, vacuum indicator gauge, in-line disposable filter and 5m of vacuum tubing. |
|
- Compact and independent vacuum plant
- Lubricated rotary vanes vacuum pump
- Regulation by mechanical vacuum switch
- Starting board and integrated hour meter |
|
As any other close mould method, infusion requires adapted means such as metering systems and reliable pumps. The reduction of measuring errors and wrong handling risks naturally leads toward the mechanisation of operations and the emphasised need for adequate equipment.
The polyester and epoxy machine range from Matrasur Composites offers all combinations necessary for infusion: injection under pressurised cover sheets, variable ratios, counting systems, among others. |
|
|
|