|
|
| Advanced materials like rod are hard to cut, but the power of a hydraulic cutter makes it easy. Holmatro offers a range of reliable hydraulic Rigging Cutters for emergencies, such as a broken mast. The Rigging Cutter line consists of hand-, battery- and remote-operated models with integrated or separate hydraulic pumps. All high quality Rigging Cutters come in a watertight package and are quick and easy to operate, in even the toughest conditions. |
|
High quality Stainless Steel wire for all marine and outdoor applications.
1 x 19 construction is low stretch and ideal for all standing rigging
applications such as shrouds, forestays and guardrails.
High quality flexible Stainless Steel wire for all marine and outdoor applications. 7 x 19 construction is designed for maximum flexibility with low stretch. Ideal for halyards or wire control lines using metal sheave blocks. |
|
| ... products without information |
| |
| ... products without information |
| |
control-column
control-column The On deck controllers based on a solid control-column from Spohn & Burkhardt are seawater resistant controllers for the use on ships. Anchor winches and bow thrusters are steered by on deck controllers. |
|
| Sold separately or with a furler, this new patented system from Karver allows to lock the stay and the sail on the mast very easily. From 1,5T to 15T |
|
The KF-H (patented) is the only system on the market that combines the furling and the locking mechanism in the same unit.
The lock mechanism allows to lock the swivel, the halyard and the sail directly onto the mast.
The lock works automatically using the halyard to lock and to unlock.
Used for flying sails (such as staysails and gennakers) it replaces the usual block system where luff tension comes from the long 2/1 or 3/1 halyard and a lot of compression in the mast.
The system and the sail are locked on the mast and the luff is tensioned from the bottom by a 2/1 or 3/1 purchase placed under the lower part of the furler.
The compression in the mast is minimized and it is possible to use a smaller and lighter halyard as it only carries the weight of the sail.
Once the system is dropped on deck, there is only the very light hollowed male end remaining on the mast and the furling-lock mechanism is on deck and accessible for maintenance.
EXCLUSIVE ADVANTAGES OF THE K-FH
-no more structural halyard
-no more blocks above the swivel
-less compression in mast = safer
-smaller halyard diameter = lighter
-straighter sail luff
-very light weight at the top of the mast when system is not in use.
|
|
| ... products without information |
| |
| ... products without information |
| |
Not only hoses but also cables, ropes and umbilicals need to be lightened under water. Resinex gives its customers a complete range of floats with reduced diameters. The key success factor of this activity is tightening. The floats cannot slip on the cable when assembled. Resinex has developed particular polyurethane clamps and reducers to maximize the grip on the cable surface. Particular studies have been carried on to give our products the best mix between loads, weight of materials and tightening forces.
Now we can supply different solutions to garantee the higher tightening force together with the usual high resistance to pressure until a 7.000 meter depth. |
|
| ... products without information |
| |
... see all the products in the category
Boom vangs
|
|
|
