|
|
Gun Sails offers a wide range of carbon masts, which adapt perfectly to your Gun Sails sail bend curve (Constant Curve) and IMCS, whereas it is also compatible with all current sails from other brands.
All Gun Sails masts are produced in high specification Prepreg Carbon Technology and have additional reinforcements in the boom area and stressed zones to extend the longevity even in extreme conditions.
No matter which model you choose, you will get a Top End Gun Sails product with a 24 month warranty.
We offer masts (standard diameter) with the following carbon percentage (in%):
25, 30, 35, 50, 55, 70, 75 and 100 and 3 RDM (Skinny) models in 50%, 70% and 100% Carbon.
Length: from 3,70m to 5,50m
Price: From 89 Euro on
|
|
RED LINE
The RED Line combines lightning test rig response with feather weight feel. Designed for the windsurfer that demands 100% performance from any rig component.
|
|
Resort ready- great for schools and first timers.
|
|
55% Carbon – Freeride/Freestyle/Wave
When durability counts the SC-6 delivers. Our strongest STD mast, gives remarkable performance on both your wave, x-over and freeride sails.
|
|
75% Carbon – Freerace/Freeride/Freestyle
The ultimate free- race/ride/style mast. SC-8 features superior durability, quick reflex response and very high performance at an excellent value.
|
|
60% Carbon – Wave
For those who demand excellence in both durability and performance with reasonable price-point, RDM6 has a compatibility with all sails in wave the and X-Over range.
|
|
100% Carbon – Race
The SC-10 is one of the lightest, best performing race masts available today. The center of gravity is low and the reflex response is the quickest of any mast in our range.
|
|
30% Carbon – All-round
This entry level carbon mast offers great performance and durability at a excellent price point.
|
|
The high-quality NORTH SAILS “all-rounder” with a carbon content of 55% and impressive overall performance. The SILVER mast series is now also produced using AEROSPACE.PREPREG.TECHNOLOGY, that allows computer-aided adjustment of the carbon, glass, and resin content. In addition, a heat-sensitive compression tape squeezes out excess resin, resulting in lower weight and even better flex.
NEW: The base section comes with white polyamide coating to prevent scratching, abrasion and thermal overstress.
|
|
|
A 75% high-tech carbon content, high-tech prepreg production, and excellent dynamics make the GOLD series the undisputable performance, weight, and price leader in the medium segment. A new feature is the full polyamide coating, which prevents any scratching or abrasion. The white surface protects the material especially against strong exposure to the sun by effectively preventing thermal overstress and heat that could reach into critical areas. This reduces material embrittlement while maintaining the bending curve absolutely constant over a long period of time. All in all, a top-quality mast for all areas of application that now has been made even more durable.
|
|
Reduced diameter mast (RDM) design constructed from 90% pre-preg carbon fiber. Intended for hardcore wavesailing and radical high wind use and fully backed, 100% guaranteed against breakage. Made in China by MacLean Composites.
|
|
C-Tech manufactures carbon fiber masts for sailing dinghies, sports boats and small multihulls. Dinghy masts include:
- 12ft skiff, 13ft skiff, 14ft skiff, 18ft skiff
- NS14
- Merlin Rocket
- International Moth
- Cherub
- Javelin
- OK Dinghy
- Flying Dutchman
- Finn
Custom-built masts are also available for sports boats and small multihulls (up to 30ft long).
|
|
|
|
|
|
|
CST supplies a complete range of tubing for the 12' skiff including masts for all 3 rig options, spreaders, spinnaker poles & booms. Emmet Lazich placed first at the 2007 Interdominion championships using CST spars.
No1 Rig - CST-470-1 mast carries a straight section to the hounds and the short tip joins into the base section. This rig offers a fairly stiff configuration and has been used by many teams over the past few years. The CST-470-2 mast is a more progressive rig developed from the International 14, it joins at the lower spreader. This mast was used by Emmet Lazich to win the 2007 Interdominion championship.
No2 Rig - The CST-471 mast is a similar style to the CST-470-1 in that it joins at the hounds giving a relatively stiff rig with a flexible tip. This mast is currently the only option for No2 rig and has been used successfully for several years by top Australian teams.
No3 Rig - The CST-472-1 joins at the hounds with a short flexible tip. The CST-472-2 is a more progressive rig which joins at the bottom spreader. This mast was also used by Emmet Lazich.
|
|
|
|
|
|
|
CST Composites has been developing 18ft Skiff spars in close relationship with Sydney's leading 18ft Skiff sailors for over 10 years.
This development has seen early success with CST masts winning the JJ Giltnan World Titles in 2004, 2005, 2006 and 2007.
A recent win at NSW Championship by Rag and Famish Hotel as well as close 2nd place finish for Active Air in 2009 J.J. Giltinan Series proves that CST spars still remain the premier 18ft skiff spar manufacturer.
Flexural rigidity is a technical term used to characterise the stiffness of a section of beam or spar. The higher the flexural rigidity, the less a spar will deflect when a bending moment of load is applied. Through various winding techniques, CST can vary the flexural rigidity profile of a tip to give the desired bend characteristics.
We apply considerable time and effort into calculating the stiffness, deflections, stresses and weights prior to production of sections. Accurate stiffness models and resulting high production reproducibility leads to unsurpassed mast properties. Much of the guess work is removed and we think this is the secret of our success.
|
|
CST supplies a complete range of carbon tubing for masts, spreaders and wings for the B14 class. Our 50 series masts are made using intermediate modulus carbon fibre and have been developed with the leading class sailors to offer the optimum bend characteristics and light weight.
The 50 series mast is also the current world champion spar can be purchased as either a rigged section, or a bare tube set.
Working closely with the B14 association, CST has also developed new carbon fibre wings replacing the existing aluminium variety. These are available as cut to length tubes ready for assembly or as a complete wing kit including moulded carbon joints and acetal fittings.
|
|
|
CST supplies a complete range of tubing for masts, spreaders, spinnaker poles and booms for the International Canoe.
|
|
CST now sells a complete range of NS14 carbon spars. These include booms, tillers, whisker poles as well as the new square eliplical mast sections. .
Designed to replace the old Flightspar and Goldspar aluminium masts, the CST 75 series carbon sections are eliptical in profile and measure 80 x 40mm OD. These sections are manufactured in one piece and come complete with woven carbon reinforcing at the hounds and base. When fully rigged the new carbon mast will weigh around 1.5kg; less than the current alloy/carbon alternatives.
|
|
|
As part of the "NEW" High Modulus carbon masts range, CST has just launched it's High Modulus Vee Ess mast. The two piece mast, comes with joining and reinforcing sleeves and track already attached.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
