|
|
All extensions come with larg rollers to minimize friction.
The Gaastra light weight extensions are developed for a 100% harmonized performance. If you pass up the golden opportunity to use both together, don´t worry, the extensions will also work on other brands.
|
|
SPECIFIC FEATURES
- Fin box mast base system with urethane tendon, used by most professional sailors.
- Universal Pin or MXT release system.
- Low profile.
- Wide surface area contacting board for better load distribution.
- Grip padded plate for shock absorption and scratch protection of board deck.
|
|
|
The race and luxury version of POWER.XT. The lever is 3cm longer, increasing the power ratio to approx. 1:60. The new 6-screw cleat plate and the tougher material of the extension tube can easily withstand the downhaul tension of very large sails, which can be fully trimmed with just one hand. Moreover, the indestructible Dyneema rope helps reduce friction.
|
|
|
Elegant and very strong. Pin and collar adjustment system removes less fiber to maintain strength of tubing. All come with the proven EX Power-Haul pulley and cleat system and 2 cm adjustment increments. Adds a maximum of 28cm to mast length.
|
|
Our lightest extensions utilize the Quick Adjust Hinged Collar and are stronger than ever with reinforced sidewalls. All come with the proven Power-Haul pulley and cleat system, EX or US format. 2 cm adjustment increments.
Adds maximum 48cm to mast length.
|
|
|
Custom alloy and bell shaped tubing provide the best weight to strength available in aluminum. All come with a pin and collar adjustment system and the proven EX Power-Haul pulley and cleat system. 2 cm adjustment increments. Adds a maximum of 38cm to mast length.
|
|
|
Custom alloy and bell shaped tubing provide the best weight to strength available in aluminum. All come with a pin and collar adjustment system and the proven EX Power-Haul pulley and cleat system. 2 cm adjustment increments. Adds a maximum of 28cm to mast length.
|
|
|
Custom alloy and bell shaped tubing provide the best weight to strength available in aluminum. All come with a pin and collar adjustment system and the proven EX Power-Haul pulley and cleat system. 2 cm adjustment increments. Adds a maximum of 12cm to mast length.
|
|
|
Elegant and very strong. Pin and collar adjustment system removes less fiber to maintain strength of tubing. All come with the proven EX Power-Haul pulley and cleat system and 2 cm adjustment increments. Adds a maximum of 12cm to mast length.
|
|
Elegant and very strong. Pin and collar adjustment system removes less fiber to maintain strength of tubing. All come with the proven Power-Haul pulley and cleat system, EX or US format. 2 cm adjustment increments.
|
|
Ripper Stubby Mast Base
Product #: RB-STUB
SIZE: no extension
Ripper stubby mast base (no extension) for standard or reduced diameter masts.
|
|
|
High-quality, functional tuning parts and accessories are the indispensable elements of a perfect day. Therefore, we dedicate a lot of time and care to the development of our accessories and their functionality, durability, and comfort. Of course, always keeping in mind the legendary NORTH SAILS guarantee for long-term compatibility!
|
|
| ... products without information |
| |
|
|
5.07 m
16' 8"
|
|
|
The success of the Melges 17® can be attributed to a truly dedicated following of speed entrepreneurs. An alternative, double-handed scow, the Melges 17 has a reputation for being fast and fun in light or heavy air. The rivalry pairings range from husband and wives to teamed siblings, making the Melges 17 the ultimate family race!
- Light and easy sailing: hull weighs 335 lbs and the carbon fiber spar is only 16 lbs
- Features an advanced underdeck board system
- Incorporates the most innovative sailing concepts: exclusive Melges Hands Free Kite System™ (HFKS), roller furling Kevlar® jib with recessed roller furler, self-stepping mast design, new foil rudder and shaped boards derived from aluminum extrusions
- Equipped with Italian Maffioli lines
|
|
|
|
6.80 m
22' 4"
|
|
|
Designed as a fun trailed club racer that is cheap and easy to build. The Thompson T650 is designed to have sailing characteristics like its big brother the Thompson 8 Meter, powerful upwind and reaching performance with large asymmetric spinnakers to take it down wind at speed. Low wetted surface and a high ballast ratio makes sure this design is capable of winning races in all wind and sea conditions.
Rigged with a double swept spreader decked stepped carbon fibre mast, running backstays or topmast stays are not required. The boom is a rolled aluminium tube and the retractable prod is made from carbon fibre.
Sails are designed to cater for all wind ranges and angles with one mainsail, three jibs and two asymmetric spinnakers.
Deck gear is kept simple with a central winch slotted in the keel lifting tubes adjacent to the centercase used for gennaker sheet control. The jib sheets are handled on a 2:1 purchase, halyards are hand tightened but can lead to the central winch if required. All other gear is dinghy style for lightness, strength and simplicity.
Performance to date has been outstanding with wins in all divisional racing and the NZ National trailer sailer championship under it's belt both on line and handicap. The boat has proven a great performer in all conditions leaving much larger and more sophisticated yachts in it's wake.
|
|
|
|
7.60 m
24' 11"
|
|
|
- Construction
The FT 7.5 is constructed using infusion for the hull lay up and vacuum
bagging the deck .
All interior bulkheads are vacuum bagged..
- Standard Equipment
Deck:
1. Single speed winches on cabin top.
2. Adjustable Jib Leads.
3. Mainsheet Traveler.
4. Manual Bilge Pump mounted In Cockpit.
5. Stainless Steel Bow Pulpit.
6. Stainless Steel Stern Pulpit.
7. Winch Handles (2).
8. Single 1x19 SS Lifeline.
9. Stowage in Cockpit for Outboard.
Interior:
1. V-berth in bow Section.
2. Port And Starboard Settee in Main Cabin
3. Stowage Aft. Under Cockpit.
4. Base for Cooler Storage.
|
|
|
|
7.65 m
25' 1"
|
|
|
The T750 has powerful upwind and reaching performance and exhilarating downwind sailing. It is a very comfortable and forgiving boat to sail in all conditions.
With the masthead or fractional spinnaker this is a no compromise racer - it can take you at a pace you've never been before.
Winner of many sport boat championships in new Zealand, Australia and Europe. There are a number world wide being built and purchased.
Demountable side decks reduces trailering width to 2.3m also enabling container shipping. The rotating prod assists in sailing low downwind angles with asymmetric spinnakers. The light weight of the yacht means towing is easy with a family car. Launching can be from ramp or crane using the keel mounted lift point.
The T750 is designed as a one design with the added advantage of being a superb PHRF racer often beating the 40 footers around the course.
The designers have utilises the latest VPP software to help create a boat that is very fast and stable upwind yet exhilarating downwind.
It features wide and comfortable side decks and a large cockpit, all of the sailing controls are simple and easy to use.
The rig features no permanent backstay with rig tension adjusted from an optional hydraulic ram under the mast. The mast is designed with the mainsail roach to bend in the puffs and allow the mainsail to exhaust.
|
|
|
|
8.30 m
27' 3"
|
|
|
|
With the masthead or fractional spinnaker this is a no compromise racer - it can take you at a pace you've never been before. The large carbon fibre rig dismantles into 2 pieces for ease of trailering. The T830 has excelled in Europe where it has won many races. Its light weather performance is second to none. The boat can be trailers on the special cantering trailer within the normal road limits.
|
|
|
|
9.20 m
30' 2"
|
|
|
The T920 is the ultimate sportboat designed to race coastal Category 2 events. It is lightweight yet incredibly strong, and can be built by professional or amateurs using Tboats’ comprehensive plans. A simple accommodation layout lets crew rest during longer races. The lifting keel with crane single lift point allows drysailing or the T920 is easily towed on its own custom tandem axle trailer.
Construction
Hull and deck are built using carbon fibre and kevlar with a foam core. The hull is built inside a quickly constructed temporary female mould and the deck in a female vacuum mould.
Keel Carbon fibre laminated with attached lead bulb, keel is removable through bottom of boat
Rudder Fibreglass laminated.
Spars
Mast carbon fibre with alloy gooseneck and vang fittings
Prod carbon fibre, retracting, articulating
Boom aluminium complete with 1 reef
Spreaders aluminium (3 sets) with alloy spreader bands
Standing rigging discontinuous rod
Backstay covered 8mm spectra
|
|
|
|
9.96 m
32' 8"
|
|
|
The Flying Tiger 10 meter was designed to fill a void in one-designed sport boats, namely affordability. In keeping with the cost factor we were able to construct a boat utilizing technology where we felt it was needed most without incurring excessive cost.
Hull: The hull and deck is vacuum bagged, cored construction. All bulkheads and interior components molded cored construction reducing weight and need for maintenance.
Mast: The high tech mast, boom and sprit are manufactured by CST composites, Sydney Australia.
Sails: The standard sails are manufactured by Neil Pryde sails.
All deck hardware provided by Harken with the exception of the rope cluthes which are supplied by SpinLock.
Facnor rounds out the standard equipment with the roller furling for the headsail.
|
|
|
|
10.36 m
34' 0"
|
|
|
Enigma 34 Race
The high performance day racer with sleek lines produced in vacuum vinylester comes with a perfect weight ratio (2300kg, 1100 in keel), long and short keel version (2.20 m/1.80 m), lifting keel (1.60 m) and the latest in Nordic Mast carbon rig, Nexus race instrument package, North Sails high performance sail package and much more. Racing ORC, IRC, Yardstick, etc...
|
|
|
|
10.36 m
34' 0"
|
|
|
The high performance day sailer with the full package of life style features on top of the features of the Enigma 34 Race such as:
Teak on cockpit, seats and deck, clear coated carbon built tiller, central cockpit box, stereo, cabin and outside sun cushions, stainless stell hand rails, electrical cooling box, etc.
|
|
|
|
11.58 m
38' 0"
|
|
|
You are at the top of your game when you sail a Melges A Scow®. This magnificent Scow is impressive to watch, not to mention race. Made with the most technologically advanced materials so that it is fast and sturdy, the A Scow spar, boom and bowsprit incorporate the use of carbon fiber within the laminate. The Melges A Scow comes complete with new, high-end Maffioli lines.
- Custom foil rudders and mast stepping pole for simple rig setup
- Superior deck board configurations for increased crew comfort
- Brand new! More user-friendly 2009 trailer is easy to tow, rig and maneuver around the club
|
|
|
|
see the results for the following category : 
