|
|
Features:
- Vertical thru-deck or above deck models.
- Fabricated steel construction.
- Polished steel capstan head.
- Head size to 36" diameter.
- Single or variable speeds available.
- Line pull up to 10,000 lbs.
- Static or bollard pull up 300,000 lbs.
- Zinc and epoxy coatings for full marine environment protection.
- Planetary or worm and spur gearing.
|
|
Features:
- Vertical thru-deck or above deck models.
- Fabricated steel construction.
- Polished steel capstan head.
- Head size to 36" diameter.
- Single or variable speeds available.
- Line pull up to 10,000 lbs.
- Static or bollard pull up 300,000 lbs.
- Zinc and epoxy coatings for full marine environment protection.
- Planetary or worm and spur gearing.
- 16" diameter polished steel head.
- Rated line pull 12,500 lbs. at 30 fpm.
- Designed for above deck mounting.
- Other sizes and features available.
|
|
|
All capstans are available with electric or hydraulic drive. Our electric capstans can be incorporated direct into the deck construction by means of a foundation pipe piece. The foundation is open at the bottom, so that is is easy to connect the motor from below deck. Our hydraulic capstans are designed to be space-saving on the vessel and you will find our models adjusted to this.
|
|
|
NDM offers a wide range of mooring winches with almost unlimited line pulls and speeds, and covers the complete range of winches for all types and sizes of vessels. NDM’s mooring winches have rugged design and heavy duty split bronze bearings. The operating mechanism for brakes and clutches are designed for easy and safe manual operation, but may also be remotely operated by hydraulic cylinders. The brakes are easily adjustable.
|
|
The spooling winches from NDM is developed for the offshore marked.
The winch enables the operator to make wire spools on a winch, secure the wire, opening the winch and then remove the wire spool. These winches are also adapted for cable drums.
|
|
|
NDM’s anchor windlass winches have rugged design and heavy duty split bronze bearings. The operating mechanism for brakes and clutches are designed for easy and safe manual operation, but may also be remotely operated by hydraulic cylinders. The brakes are easily adjustable. The winch design provides easy access to all points for lubrication and inspections
|
|
Coastal Marine Equipment's Capstan sizes range from 6" to 36", above deck, right angle or through deck. Static bollard ratings to 300,000 lbs.
All Capstans are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Electric drives are offered AC or DC. Hydraulic drives operate off central hydraulic system or dedicated system supplied with unit.
|
|
Coastal Marine Equipment's Capstan sizes range from 6" to 36", above deck, right angle or through deck. Static bollard ratings to 300,000 lbs.
All Capstans are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Electric drives are offered AC or DC. Hydraulic drives operate off central hydraulic system or dedicated system supplied with unit.
|
|
The product-group of winches represent a full scalar of winches suitable for incorporating in your davit system.
The winches can be supplied with a smooth single drum, a single two section drum or two drums (one on either side) and are, as standard, designed to meet the speeds and loads resulting from double-falls reeving.
The winches are normaly deck-mounted and are full accordance with the present SOLAS-rules
|
|
The product-group of winches represent a full scalar of winches suitable for incorporating in your davit system.
The winches can be supplied with a smooth single drum, a single two section drum or two drums (one on either side) and are, as standard, designed to meet the speeds and loads resulting from double-falls reeving.
The winches are normaly deck-mounted and are full accordance with the present SOLAS-rules
|
|
Coastal Marine Equipment's Anchor Winches and Mooring Winches are available in single or double drum configurations.
All winch designs are available with optional catheads.
|
|
Coastal Marine Equipment's Anchor Winches and Mooring Winches are available in single or double drum configurations.
All winch designs are available with optional catheads.
|
|
Coastal Marine Equipment's Anchor Winches and Mooring Winches are available in single or double drum configurations.
All winch designs are available with optional catheads.
|
|
Metso offers a wide range of mooring winches with almost unlimited line pulls and speeds. Although their primary use is aboard ship, their application for onshore or permanent installations is limitless.
The mooring winch operate as effectively at mooring a ship or barge from shore as they do from the ship, and can perform functions such as shifting, holding and positioning for loading and unloading, while at the same time compensating for variations in draft with the constant tensioning feature.
Shore installations for barge loading or unloading is a natural application for a constant tensioning feature.
|
|
Coastal Marine Equipment's Anchor Windlasses are designed and manufactured to ABS requirements (or other regulatory bodies if required) and supplied with catheads, lever operated jaw clutches and hand wheel operated band brakes.
Windlass units are available in single or double, vertical or horizontal configurations. Additional sizes are available. All Windlasses are designed for grade 3 stud link chain.
All Anchor Windlasses are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Electric drives are offered AC or DC. Hydraulic drives operate off central hydraulic system or dedicated system supplied with unit.
|
|
Coastal Marine Equipment's Anchor Windlasses are designed and manufactured to ABS requirements (or other regulatory bodies if required) and supplied with catheads, lever operated jaw clutches and hand wheel operated band brakes.
Windlass units are available in single or double, vertical or horizontal configurations. Additional sizes are available. All Windlasses are designed for grade 3 stud link chain.
All Anchor Windlasses are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Electric drives are offered AC or DC. Hydraulic drives operate off central hydraulic system or dedicated system supplied with unit.
|
|
Coastal Marine Equipment's Anchor Windlasses are designed and manufactured to ABS requirements (or other regulatory bodies if required) and supplied with catheads, lever operated jaw clutches and hand wheel operated band brakes.
Windlass units are available in single or double, vertical or horizontal configurations. Additional sizes are available. All Windlasses are designed for grade 3 stud link chain.
All Anchor Windlasses are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Electric drives are offered AC or DC. Hydraulic drives operate off central hydraulic system or dedicated system supplied with unit.
|
|
Coastal Marine Equipment's Anchor Windlasses are designed and manufactured to ABS requirements (or other regulatory bodies if required) and supplied with catheads, lever operated jaw clutches and hand wheel operated band brakes.
Windlass units are available in single or double, vertical or horizontal configurations. Additional sizes are available. All Windlasses are designed for grade 3 stud link chain.
All Anchor Windlasses are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Electric drives are offered AC or DC. Hydraulic drives operate off central hydraulic system or dedicated system supplied with unit.
|
|
|
|
